CHR Series Non-magnetic Chip Resistors • • • • • • • • Resistances from 1 Ohm to 10M Ohms Power Rating 0.05 to 1.5Watt Resistance Tolerances to ± 0.5% TCR’s to ± 50 ppm/°C Non-Magnetic (contact PtAg) Suitable for Glueing or Soldering Sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512 / 4020 Special HT Version to 300°C SPECIFICATIONS Type 0402 0603 0805 1206 2010 2512 4020 Power Rating ( W )1 0.05 0.10 0.125 0.25 0.50 1.0 1.5 Trimmed 30 75 100 200 250 300 500 Untrimmed (≥ 5% tol.) 60 150 200 400 900 1200 1200 Working Voltage ( VAC ) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C ) (others upon request) Resistance Range (Ω) 1Ω - <10Ω 10% to 20% 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 5% to 20% 100 / 250 10Ω - <100Ω 5% to 10% 100 2% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 100Ω - 1M 1% to 10% 50 / 100 1% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 0.5% to 10% 50 / 100 >1M - 10M 5% to 20% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1% to 10% 50 / 100 1 W @ 70 °C / 0W @ 155 °C Specification Value Temperature Range -55°C to +155°C (Standard) -55°C to +125°C (50ppm/°C Parts) -55°C to +300°C (HT Version, TCR valid +25°C to +125°C ) Climactic Cetegory 55 / 155 / 56 Solderability 250°C / 3s (up to 6 month after shipment resp. at storage in Nitrogen) Max. Soldering Temperature 260°C / 10s CHR Series Non-magnetic Chip Resistors SPECIFICATIONS (continued) Max ∆R Long Term Stability <10Ω 10Ω - 10M Storage 125°C / 1000h ±1% ±0.5% Storage 155°C / 1000h ±2% ±1% Load Life / P=70% / 70°C / 1000h ±1% ±0.5% ±0.5% ±0.25% ±1% ±0.5% Short term overload Humidity / 96%RH / 40°C / 56 days Dimensions Type L B D C CHR 0402 0.040 ±0.006 [ 1.04 ±0.15 ] 0.020 ±0.006 [ 0.5 ±0.15 ] 0.012 ±0.002 [ 0.3 ±0.05 ] 0.004 +0.004 / -0.002 [ 0.1 +0.1 / -0.05 ] CHR 0603 0.060 +0.006 / -0.002 [ 1.5 +0.15 / -0.05 ] 0.030 +0.008 / -0.002 [ 0.8 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.008 +0.008 / -0.004 [ 0.2 +0.2 / -0.1 ] CHR 0805 0.080 +0.006 / -0.002 [ 2.0 +0.15 / -0.05 ] 0.050 +0.006 / -0.002 [ 1.25 +0.15 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] CHR 1206 0.120 +0.006 / -0.002 [ 3.2 +0.15 / -0.05 ] 0.060 +0.008 / -0.002 [ 1.5 +0.2 / -0.05 ] 0.016 +0.006 / -0.002 [ 0.4 +0.15 / -0.05 ] 0.012 +0.008 / -0.004 [ 0.3 +0.2 / -0.1 ] CHR 2010 0.200 +0.006 / -0.002 [ 5.1 +0.15 / -0.05 ] 0.100 +0.008 / -0.002 [ 2.5 +0.2 / -0.05 ] 0.024 +0.008 / -0.004 [ 0.6 +0.20 / -0.1 ] 0.047 ±0.008 [ 1.2 ±0.2 ] CHR 2512 0.250 +0.006 / -0.002 [ 6.2 +0.15 / -0.05 ] 0.120 +0.008 / -0.002 [ 3.2 +0.2 / -0.05 ] 0.024 +0.008 / -0.004 [ 0.6 +0.20 / -0.1 ] 0.035 ±0.008 [ 0.9 ±0.2 ] CHR 4020 0.402 +0.006 / -0.002 [ 10.2 +0.15 / -0.05 ] 0.200 +0.006 / -0.002 [ 5.1 +0.15 / -0.05 ] 0.024 +0.008 / -0.004 [ 0.6 +0.20 / -0.1 ] 0.035 ±0.008 [ 0.9 ±0.2 ] Power Derating Curve Bulk or Blistertape to IEC 60286-3 100 HT r Ve 60 40 n ard sio nd Ordering Information 80 Sta Tape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value Minimum quantity Tape & Reel / 1000 pieces per value Power ( % ) Packaging: 120 20 0 0 Part Description: Part Type - Resistance - Tolerance - TCR Example: CHR 0603 10 kOhms 5% 50ppm ( Note: if no TCR is specified, the highest value will be supplied ) 50 100 150 200 250 300 Ambient Temperature (°C) 350