New Product Release Low Profile, High Power Chip The modern electronics industry is in a constant struggle of increasing performance while decreasing size and cost. To help you succeed, Riedon introduces its PFC series resistors. These modern, high-power surface mount chips replace standard TO-126 (25W) SMT packages with a PCB pad compatible chip only 1mm (0.04”) thick, a decrease in thickness of over 75%. In addition to the size advantage, the PFC is over 25% less expensive than standard TO style SMT packages. APPLICATIONS Battery charger & Management Power electronics, Power consumption meter, Electronic load equipment’s, Automotive The back of the chip is metalized for excellent thermal dissipation to your PCB and/or heat sink. Wrap around terminations bring the connections to the top of the chip where a high quality, power film resistor resides. The non-inductive design offers superior performance in high frequency and high-speed pulse applications. Spec Highlights Rating Power 25Watts with heatsink Rating Power 0.5Watts Now stocked in Digikey Short Time Overload Heat Resistance Resistance Range Nominal TCR(ppm/deg C) Tolerance 40W 3.6 deg C/W 1.0 - 51kΩ E12+ 100 (A) +/-5%(J),+/-1% (F) Capacitance 1.44pF Inductance 8.38nH Operation Temp. -55 deg C to+155 deg C