DIESEL GENERATOR SET DG00400D5

DIESEL GENERATOR SET
DG00400D5
400 – 230 V/400 kVA/50 Hz/Standby
Series 1600 – MTU 8V1600
Optional equipment and finishing shown. Standard may vary.
PRODUCT HIGHLIGHTS
//
Benefits
- Industry-leading average load factor
- Low fuel consumption
- Emissions optimizations available
- High availability and reliability
- Outstanding load acceptance
- Long maintenance intervals
//
Support
- Global product support offered
//
Standards
- Engine-generator set is designed and manufactured in
facilities certified to standards ISO 2008:9001
- Generator set complies to ISO 8528 and fullfills
performance level G3
- Generator meets BS5000; NEMA MG 1; ISO; DIN EN
and IEC standards
- NFPA 110
//
Available optimizations
- Exhaust emission EU 97/68 EC Stage III A
- NEA Singapore for off road diesel engines (ORDE)
- ARAI Stg II
- Fuel optimized
//
Wide Standard Scope of Supply
- 4P circuit breaker
- Island operation control panel
- Integrated fuel tank
- Industrial silencer (15 dB(A))
- Batteries & battery charger
//
Complete range of accessories available
- Sound attenuated enclosure
- Fuel system accessories
- Control panel & ATS
- Range of additional electronical options
//
Warranty
- Standard 36 months warranty after shipment
2
/ // / DG00400D5 / 50 Hz / 400 - 230V
APPLICATION DATA➀
//
Engine
Manufacturer
Model
Type
Arrangement
Displacement: L
Bore: mm
Stroke: mm
Compression ratio
Rated rpm
Engine governor
Gross power: kWm
Air cleaner
//
//
MTU
8V1600G70F
4-cycle
8-V
14
122
150
17.5
1500
ECU 8
358
Dry
Generator brand
Generator type
Insulation class
Bearing
Enclosure
Voltage regulation
Exciting system
//
Electrical
24
2
2x 75
Fuel System
Max. fuel flow: L/h
Fuel tank capacity: OPU (EPU) in L
Autonomy: h
342
740 (740)
12
Fuel Consumption
At 100% of power rating:
//
Mecc-Alte
HM280B3
H-class
single bearing
IP23 M
A.V.R. (electronic)
self-excited, brushless
Electric system volts DC
Number of batteries
Capacity: Ah
//
//
Generator
Liquid Capacity
Total oil system: L
Total coolant capacity: L
Aspirating: m3/min
Cooling air flow: m3/s
//
L/h
85.75
46
84
Air Requirements
Exhaust System
Gas temp. (stack): °C
Gas volume at stack temp.: m3/min
Maximum allowable back pressure: kPa
//
490
60
15
Cooling/Radiator System
Ambient capacity of radiator in OPU (EPU): °C
Pressure on rad. exhaust: kPa
Heat rejection to coolant: kW
➀ Technical data is for a fuel-optimized unit.
24.6
6.5
50 (50)
0.2
180
3
/ // / DG00400D5 / 50 Hz / 400 - 230V
STANDARD AND OPTIONAL FEATURES
//
System Ratings (kW/kVA)
Voltage
Phase
Hz
kWel*
kVA**
Rated AMPS
DG00400D5
Standby operation
400 V
Three phase
50
320
400
577
* cos phi = 1,0
** cos phi = 0,8
Also available for following voltages 380V & 415V - for details please contact your local MTU Onsite Energy Dealer.
//
Engine
■ 4- strokes diesel engine
■ Flywheel housing SAE 1
■ Flywheel 14''
■ Four-valve, overhead camshaft
■ Piston cooling via oil spray nozzle
■ Forged crankshaft & connecting rods
■ Oil pan
■ Lube oil circulation pump
■ Dry exhaust manifolds
■ Hot components and radiator guards
■ Mobile components guards
■ Lube oil filter
† Automatic fuel transfer pump
† Heavy-duty fuel pre-filter with water
seperator
† 3-way valve for fuel filling
■ IP23 M protection degree
■ Insulation class H
■ Control and power electric panel, with
measurements devices and contoller
† ATS (Automatic Transfer Switch)
† Control version for parallel operation
† Remote display
† Expansion module for
CAN communication
† ModBus connection to
customer systems TCP/IP
† Control version for synchronizing with
mains without blackout
■ Represents standard features
† Represents optional features
//
Fuel system
■ Fuel main filter
■ Fuel pre-filter with water seperator
■ Common rail fuel injection
//
Generator
■ 3-Phase, syncronos, brushless,
self exciting, self regulating,
self ventilating alternator
//
Control Panel & Electric Options
4
/ // / DG00400D5 / 50 Hz / 400 - 230V
STANDARD AND OPTIONAL FEATURES, CONTINUATION
//
Circuit Breaker/Power Distribution
■ 4 poles manual circuit breaker
(motorized with DeepSea controllers)
//
Starting/Charging System
■ 24V electric system
■ Starting batteries installed
//
■ Engine mounted fan drive
■ Resilent mounting of engine
and generator
■ Integrated fuel tank (level sensor
and drain cap incl.)
Enclosures
† Sound proof enclosure
//
■ Front type radiator for jacket water
and charge aircooling circut with
integrated expansion tank
Mounting System
■ Mounted on steel base frame
//
† Residential silencer 35 dB(A)
Cooling System
■ Coolant circulation pump
//
■ Intercooler, integrated in radiator
† Heavy duty air filter with automatic
dust evacuation
Exhaust System
■ Industrial silencer 15 pdB(A)
//
■ Battery charging alternator
■ Battery disconnector
■ Battery charger
Air Intake System
■ Exhaust turbochargers
■ Set of dry-type air filters with
contaiment indicator
//
■ Pre-heating resistance/jacket
water heater
† Socket box
Documentation & Certifications
■ Genset & component manuals
■ Maintaince schedule
† CE-certification for EU
■ Fluids and lubricants specification
■ Represents standard features
† Represents optional features
5
/ // / DG00400D5 / 50 Hz / 400 - 230V
WEIGHTS AND DIMENSIONS
Drawing above for illustration purposes only, based on standard open and enclosed power 400 Volt engine-generator set. Lengths may vary with other voltages. Do not use for installation
design. See website for unit specific template drawings.
System
Open Power Unit (OPU)
Enclosed Power Unit
Dimensions (L x W x H)
3.600 x 1.602 x 2.121 mm
4.500 x 1.800 x 2.340 mm
Weight (wet/with standard accessories)
3.496 kg
5.232 kg
Consult the factory for accurate weights and dimensions for your specific engine-generator set. Lengths may vary with other voltages. Do not use for installation design.
SOUND DATA
Unit Type
Open Power Unit: dB(A)
Enclosed Power Unit: dB(A)
Standby full load and enclosed
on request
62.8
Sound data is provided at 7m for 75% prime power.
RATING DEFINITIONS AND CONDITIONS
Standby ratings apply to installations served by a reliable utility source. The standby rating is applicable to varying loads for
the duration of a power outage. No overload capability for this rating. Ratings are in accordance with ISO 8528-1, ISO 3046-1,
BS 5514, AS 2789 and DIN 6271. Average load factor: < 85%, max. 500h/year.
// Derating factor:
Altitude: Consult your local MTU Onsite Energy Power Generation distributor for altitude deratings.
Temperature: Consult your local MTU Onsite Energy Power Generation distributor for temperature deratings.
Rated power for reference conditions at 25°C and 100m above sea level.
Materials and specifications subject to change without notice.
MTU Onsite Energy
A Rolls-Royce Power Systems Brand
www.mtuonsiteenergy.com
Subject to change. | 3237991 | Edition 01/14 | ENC 2014-03.
//