D1U54P-12-CONC www.murata-ps.com D1U54P-12 Connector Card Application Note PRODUCT OVERVIEW This Output Connector card can be used to connect the D1U54P-x power supplies for bringing out the output voltage and signals for bench evaluation. Customers can also use this card as an interface to their applications. SAFETY PRECAUTION This D1U54P-12-CONC output connector card is intended to facilitate the connection for the user to evaluate the D1U54P-x power supplies in the laboratory. There is 12V exposed on this output connector card; please take the necessary safety precautions during your product evaluation. SCHEMATIC - D1U54P-12-CONC A B C KELVIN POINTS 1 +12V_OUT_KELVIN 2 +12V_RTN_KELVIN J4 RUSA P1 P2 P3 P4 P5 P6 +V1OUT P7 +V1OUT P8 +V1OUT +V1OUT (PGND) 1 A MT1 A +12V_OUT MT2 P10A P10B P10C P10D P10E P10F P9A P8A P9B P9C P9D P9E P9F P8B P8C P8D P8E P8F P7A P6A P7B P7C P7D P7E P7F P6B P6C P6D P6E P6F P5A P4A P5B P5C P5D P5E P5F NOISE MEASUREMENTS R1 S NOISE MEASUREMENTS S G1 G2 G3 G4 100R R4 3V3_STBY C1 BNC SCOPE C3 C4 #6 STUD D +12VRS E3 D3 C3 B3 A3 +12VRS_RTN SDA J14 1 2 E4 D4 C4 B4 A4 ACOK +12V_ISHARE JP11 SMB_ALERT PSON SCL PRESENT_L I2C_ADR1 JP9 PWR_GOOD +12V_ISHARE 1 2 3V3_STBY PD4 #6 STUD JP3 D PRESENT_L 2 JP10 I2C_ADR0 A 3 J7 1 2 3 PS_KILL J5 J13 4 D TEST PINS +12V_ISHARE R5 N/F 1 2 PWR_GOOD R6 N/F 3 ACOK 3V3_STBY TP1 TP2 5 1 LOCATION 4 U1 ADUM1250 OUT IN OUT 1-2 1-2 2 3 4 7 6 5 D ALT_PIN OUT 2 5 SCL 6 7 SDA 2 U2 4 U2 1 STD PIN OUT LOCATION CONFIG:1 CONFIG:2 JP9 JP10 JP11 J13 J14 OUT IN OUT 1-2 1-2 IN OUT IN 2-3 2-3 RIBBON CONNECTOR FOR QATE TESTS 1 (SGND) +12V_OUT_KELVIN +12V_RTN_KELVIN +12VRS +12VRS_RTN +12V_ISHARE D MOUNTING HOLES PAD PAD MT1 MT2 PAD MT3 3V3_STBY(+VSB_KEL) (SGND) (-VSB_KEL) D PSON PS_KILL PWR_GOOD N/F N/F N/F N/F 2 3 4 5 6 7 TP3 APS 100N C7 S2 VCC_I2C I2C_ADR3 I2C_ADR2 I2C_ADR1 I2C_ADR0 SCL SDA (SGND) 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 3 J3 4 N/F NOTE: PRESENT_L IS GROUNDED IN UNIT QATE TEST :REMOVE U1,AND JUMPERS FROM JP1/JP2/JP3/JP7/JP8 BENCH TEST :JUMPER JP1, JP2, JP3, JP7, JP8 JUMPERS REQUIRE AS PER TABLE 1 TITLE ADAPTOR TEST BOARD FOR TG1728 MURATA PS DWN: B TABLE 1 3V3_STBY 8 IN OUT IN 2-3 2-3 D A THROUGH HOLE FOR SMD PART ADUM1250ARZ ON PCB SCL1 3 U2 1 +5V SDA1 2 1 D CONFIG:1 CONFIG:2 JP9 JP10 JP11 J13 J14 R12 I2C_ADR1 R13 I2C_ADR2 R14 I2C_ADR3 R15 8 I2C_ADR0 1 MICRO PROGAMMING 4 SMB_ALERT R7 1 ECO: 16MAY2011 DIPAK LAD 2 ECO: 13SEPT2012 A DIPAK LAD 4 1 J12 1 2 3 SCL 4 SDA 5 6 SCL PRESENT_L SMB_ALERT ACOK 1 C6 100N JP8 3 S1 2A KELVIN POINTS 1 (+VSB_KEL) 2 (-VSB_KEL) 1 2 1 2 E5 D5 C5 B5 A5 PS_KILL APS PD3 SCL SDA PS_KILL 1 2 3 3 (SGND) (D1) (C1) (B1) (A1) (D2) (C2) (B2) (A2) (D3) (C3) (B3) (A3) (D4) (C4) (B4) (A4) (D5) (C5) (B5) (A5) (D6) (C6) (B6) (A6) 1 2 1 2 7 SDA 2 SCL1 1 2 SDA1 3 +5V 4 SCL1 J2 S1U S1T I_SHARE_OP1 S1S S1R +SNS1 S2U P_GD/OK S2T P_FAULT I2C_ADR0 S2S S2R -SNS1 S3U GND S3T GND I2C_ADR1 S3S I2C_DATA S3R S4U GND S4T GND I2C_ADR2 S4S I2C_CLOCK S4R S5H +V2OUT S5G +V2OUT S5F PS_KILL S5E +SNS2 S6H +V2OUT S6G +V2OUT PRESENT S6F PS_ON/ENB S6E AC_OK SMB_ALERT I2C_ADR0 +12VRS_RTN 3V3_STBY I2C_ADR1 E2 D2 C2 B2 A2 SDA1 R11 2K49 R10 2K49 8 TABLE 1 A ACOK PWR_GOOD 3V3_STBY 3V3_STBY 3V3_STBY 3V3_STBY 3V3_STBY 1 JP7 TEST PINS J11 +12V_ISHARE +12VRS 100N E1 D1 C1 B1 A1 JP2 R9 3K32 1 SCL1 2 SDA1 3 +5V 4 5 MISO 6 7 SCLK C5 100N 8 MOSI 9 SS 10 C2 (PGND) 100N 10UF J1 PD2 JP1 BNC SCOPE 10UF 100R 2 N/C+5V J8 R8 I2C/SPI 3K32 J10 100R J9 R3 G1 G2 G3 G4 100R R2 1 2 J1 P4B P4C P4D P4E P4F P3A P2A P3B P3C P3D P3E P3F P2B P2C P2D P2E P2F P1B P1C P1D P1E P1F P1A +12V_OUT REVISIONS J2 AARDVARK N/C+5V 1 2 J1 D I2C ISOLATOR UUT3V3_STBY SIDE PC SIDE +5V PD1 C 08MAR2011 DATE: B DIPAK LAD TBD DWG NO. REV 779-010-1728-2 SHEET 1 OF A 1 D For full details go to www.murata-ps.com/rohs www.murata-ps.com/support 06 Aug 2013 ACAN44.A01 Page 1 of 2 D1U54P-12-CONC D1U54P-12 Connector Card Application Note MECHANICAL DIMENSIONS - D1U54P-12-CONC CONNECTOR CARD PHOTOGRAPHS Top side Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Bottom side This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2013 Murata Power Solutions, Inc. www.murata-ps.com/support 06 Aug 2013 ACAN44.A01 Page 2 of 2