2015-4장-02 2015.1.20 03:51 PM 페이지178 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LS Low Leakage Current, Height 7mmL Series Low Leakage Current Solvent Proof ・Low leakage current series with 7mmL height ・Load life of 2000 hours at 85° C ・Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance -40 ~ +85° C I = 0.002CV or 0.4μA whichever is greater (after 2 minutes) ±20% at 120Hz, 20° C 6.3 0.24 WV tanδ Dissipation factor max. (at 120Hz, 20° C) 10 0.20 WV Z-25° C/Z+20° C Z-40° C/Z+20° C Low temperature characteristics (Impedance ratio at 120Hz) 6.3 4 8 Leakage current Capacitance change tanδ Load life (after application of the rated voltage for 2000 hours at 85° C) 16 0.16 25 0.14 35 0.12 10 3 6 40 0.12 50 0.10 63 0.10 16, 25 2 4 35 ~ 63 2 3 Less than specified value Within ±20% of initial value Less than 200% of specified value After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Shelf life (at 85° C) Unit : mm ● DRAWING Ød±0.05 Tinned copper-ply wire ØD+0.5 max. Insulating sleeve ØD + P±0.5 - 15 min. L+βmax. 4 5 6.3 P 1.5 2.0 2.5 Ød 0.45 0.5 β 1.0 0.5 1.5 4 min. ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV μF 6.3 10 16 25 35 40 50 63 4×7 14 4×7 14 1.5 4×7 17 4×7 17 2.2 4×7 21 4×7 21 3.3 4×7 25 5×7 29 1.0 4.7 6.8 10 15 4×7 38 4×7 28 4×7 28 5×7 35 6.3×7 40 6.3×7 49 4×7 31 5×7 38 5×7 39 5×7 42 4×7 35 5×7 43 5×7 46 5×7 47 6.3×7 59 5×7 49 5×7 53 6.3×7 66 6.3×7 66 6.3×7 72 6.3×7 80 6.3×7 79 22 4×7 43 5×7 53 5×7 60 6.3×7 74 33 5×7 60 5×7 65 6.3×7 85 6.3×7 91 47 5×7 71 6.3×7 90 6.3×7 101 68 6.3×7 99 6.3×7 109 100 6.3×7 120 Ripple current (mA rms) at 85° C, 120Hz Case size ØD×L (mm) ● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency μF ~ 47 68 ~ 178 50Hz 120Hz 1kHz 10kHz≦ 0.75 1.00 1.55 2.00 0.80 1.00 1.35 1.50