2015-4장-02 2015.1.20 03:51 PM 페이지179 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LE Low Leakage Current, Height 5mmL Series Low Leakage Miniaturized Solvent Proof Current ・Low leakage current series with 5mmL height ・Designed for use in lightweight and portable equipment ・Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance -40 ~ +85° C I = 0.002CV or 0.4μA whichever is greater (after 2 minutes) ±20% at 120Hz, 20° C Dissipation factor max. (at 120Hz, 20° C) 4 0.35 WV tanδ 6.3 0.24 WV Z-25° C/Z+20° C Z-40° C/Z+20° C Low temperature characteristics (Impedance ratio at 120Hz) Load life (after application of the rated voltage for 1000 hours at 85° C) 10 0.20 4 7 15 16 0.16 6.3 4 10 Leakage current Capacitance change tanδ 10 3 8 25 0.14 35 0.12 50 0.10 16 2 6 25 2 4 35, 50 2 3 Less than specified value Within ±20% of initial value Less than 200% of specified value After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Shelf life (at 85° C) Unit : mm ● DRAWING Ød±0.05 Tinned copper-ply wire ØD+0.5 max. Insulating sleeve ØD + 15 min. 5 1.5 2.0 2.5 Ød 0.45 0.45 0.45 β 1.0 P±0.5 - L+βmax. 4 P 4 min. 6.3 1.5 WV μF 4 6.3 10 16 25 35 50 1.0 4×5 12 1.5 4×5 15 2.2 4×5 18 3.3 4×5 22 4.7 6.8 10 15 5×5 31 4×5 27 5×5 34 6.3×5 44 6.3×5 53 31 5×5 38 5×5 42 6.3×5 59 4×5 34 5×5 44 6.3×5 55 6.3×5 66 4×5 37 5×5 47 6.3×5 62 44 5×5 53 6.3×5 68 6.3×5 76 47 5×5 52 6.3×5 74 6.3×5 81 68 6.3×5 74 6.3×5 89 100 6.3×5 89 33 25 4×5 5×5 22 4×5 Ripple current (mA rms) at 85° C, 120Hz Case size ØD×L (mm) ● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency μF ~ 47 68 ~ 50Hz 120Hz 1kHz 10kHz≦ 0.75 1.00 1.55 2.00 0.80 1.00 1.35 1.50 179 MINIATURE TYPES ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT