2015-4장-02 2015.1.20 03:49 PM 페이지169 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS NE Non-Polarized, Height 5mmL Series Miniaturized Non-polarized Solvent Proof ・Non-polarized and low profile series with 5mmL height ・Uniquely designed for use in lightweight and portable equipment ・Complied to the RoHS directive Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance -40 ~ +85° C I = 0.05CV or 10μA whichever is greater (after 2 minutes) ±20% at 120Hz, 20° C WV tanδ Dissipation factor max. (at 120Hz, 20° C) 10 0.20 WV Z-25° C/Z+20° C Z-40° C/Z+20° C Low temperature characteristics (Impedance ratio at 120Hz) Load life (after application of the rated voltage for 1000 hours at 85° C) 6.3 0.24 16 0.17 6.3 4 8 Leakage current Capacitance change tanδ Test method 25 0.17 10 3 6 35 0.15 50 0.15 16, 25 2 4 35, 50 2 3 Less than specified value Within ±20% of initial value Less than 200% of specified value Polarity reverse each 250 hours After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value. The measurement shall be performed at 20° C by the KS C IEC 60384 - 4 Shelf life (at 85° C) Unit : mm ● DRAWING Ød±0.05 Tinned copper-ply wire Insulating sleeve ØD+0.5 max. ØD P±0.5 L+βmax. 15 min. 4 min. 4 5 P 1.5 2.0 6.3 2.5 Ød 0.45 0.45 0.45 β 1.0 1.5 MINIATURE TYPES ● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT WV μF 6.3 10 16 25 35 50 1.0 4×5 10 1.5 4×5 12 2.2 4×5 14 4×5 15 5×5 17 3.3 5×5 20 5×5 21 5×5 21 4.7 4×5 21 5×5 24 5×5 25 6.3×5 30 6.8 5×5 29 6.3×5 33 6.3×5 36 6.3×5 36 6.3×5 41 6.3×5 43 10 4×5 28 5×5 35 15 4×5 31 5×5 39 6.3×5 50 22 5×5 43 6.3×5 55 6.3×5 60 33 6.3×5 62 47 6.3×5 74 Ripple current (mA rms) at 85° C, 120Hz Case size ØD×L (mm) 68 6.3×5 ● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT Frequency 50Hz 120Hz 1kHz 10kHz≦ Coefficient 0.75 1.00 1.55 2.00 169