OD 112 ID 6.35mm HT 3.96mm HT, max 3.96mm 0.156in OD, max 11.9mm 0.469in ID, min 5.89mm 0.232in HT, max 4.72mm 0.186in (Ae) 0.0906cm2 0.014in2 (le) 2.69cm 1.059in (Wa) 0.2725cm2 54000cmil (V) 0.2437cm3 0.015in3 Core Part Number Permeability( ) Part Number High Flux Sendust AL (nH/N2) MPP 11 26 32 38 53 63 68 74 85 OR112M026 OR112M060 OR112M125 OR112M147 OR112M160 OR112M173 OR112M200 26 60 75 90 125 147 160 173 200 OR112H026 OR112H060 OR112H125 OR112H147 OR112H160 OR112H173 OR112H200 OR112S026 OR112S060 OR112S075 OR112S090 OR112S125 - DC Resistance(Rdc) per Inductance( /mH) SFlux OR112F060 OR112F090 - 1.9713 0.8542 0.6834 0.5695 0.4100 0.3487 0.3203 0.2963 0.2563 Winding Information AWG wire Single layer No. Dia.(cm) Turns 16 17 18 19 20 21 0.137 0.122 0.110 0.098 0.088 0.079 10 11 13 15 17 20 AWG wire Single layer Rdc, No. Dia.(cm) Turns 0.0020 0.0028 0.0042 0.0061 0.0087 0.0130 22 23 24 25 26 27 0.070 0.063 0.057 0.051 0.045 0.041 23 26 29 33 37 42 AL value vs. DC Bias characteristics AWG wire Single layer Rdc, No. Dia.(cm) Turns Rdc, 0.0188 0.0268 0.0378 0.0543 0.0770 0.1090 28 29 30 31 32 33 0.037 0.033 0.030 0.027 0.024 0.022 47 52 59 66 73 82 0.1550 0.2140 0.3110 0.4380 0.6000 0.8560 Core Data ID, min 6.35mm 0.25in Volume Core Cross Reference Table OD, max 11.18mm 0.44in Physical specifications Cross Section Path Length Window Area After Coating Before Coating Technical Information Core dimensions and Physical specifications