KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Schematic z Description The KAQW612 series contains two independent 1 Form A and 1 Form B SPST relays. The relay is 8 7 6 5 1 2 3 4 constructed using a GaAlAs LED for actuation control and an integrated monolithic dies for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuitry and MOSFET switches. 1 FORM A/B 1 FORM C 8 7 1 2 6 5 3 4 z Features 1. Normally open and close, single pole single throw 2. Control 60V AC or DC voltage 3. Switch 200mA loads 4. Controls low-level analog signals 5. High sensitivity, low ON resistance 6. Low-level off-state leakage current 7. High isolation voltage 5KV (DIP / SMD) 8. Pb free and RoHS compliant 9. Agency Approvals： • UL / CUL Approved ( No. E169586) • VDE Approved (No. 40020973) z Application • Telecommunications (PC, electronic notepad) • Modem • Telephone equipment • Security equipment • Sensors • Measuring and testing equipment • Factory automation equipment • High speed inspection machines Cosmo Electronics Corp. Document No. 69M22001.2 -1- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Outside Dimension Unit：mm 1. Dual-in-line type. 2. Surface mount type. KAQW612 KAQW612A 7.62 9.68 6.50 7.62 9.68 10.00±0.4 0.50 1.20 0.25 1.00 0.25 0.10±0.1 0~10° 2.70 3.00 0.40 3.50 3.50 6.50 1.20 2.54 2.54 13.00° 13.00° 3. Small outline for surface mount type. KAQW612S 4.40 0.50±0.3 6.8±0.4 2.35Max. 2.30 0.05 +0 -0.05 9.80 0.40 TOLERANCE：±0.2mm 2.54 z Device Marking Notes： cosmo cosmo □ W612 YWW Cosmo Electronics Corp. Document No. 69M22001.2 W612□ □：Pin forming YWW Y：Year code / W：Week code -2- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Absolute Maximum Ratings (Ta=25℃) Item Input Symbol Rating Unit Continuous forward current IF 50 mA Peak forward current IFP 1 A Reverse voltage VR 5 V Power dissipation Pin 100 mW - 1.3 mW/℃ Breakdown voltage VB 60 V Continuous load current IL 200 mA Pout 500 mW KAQW612S KAQW612 1500Vrms 5000Vrms Derate linearly from 25℃ Output Power dissipation Isolation voltage Viso Isolation resistance (Vio=500V) Riso ≧10 10 Ω Total power dissipation Pt 550 mW Derate linearly from 25℃ - 2.5 mW/℃ Operating temperature Topr -40 to +85 ℃ Storage temperature Tstg -40 to +125 ℃ Junction temperature Tj 100 ℃ Tsot 260 ℃ Soldering temperature 10 seconds z Electro-optical Characteristics Input (Ta=25℃) Parameter Symbol Forward voltage VF Operation input current Recovery input current Breakdown voltage VL=20V, IL=100mA (N.O) IFOFF (N.C) VL=20V, IL≦5μA (N.C) IFOFF (N.O) VL=20V, IL≦5μA (N.O) IFON (N.C) VL=20V, IL=100mA (N.C) VB ILEAK I/O capacitance Ciso ON resistance RON Operate (OFF) time Reverse (ON) time Cosmo Electronics Corp. Document No. 69M22001.2 IF=10mA IFON (N.O) Output Off-state leakage current Conditions IB=50μA, IF=0mA (N.O) IB=50μA, IF=10mA (N.C) VL=60V, IF=0mA (N.O) VL=60V, IF=5mA (N.C) VB=0V, f=1MHz IF=10mA, IL=100mA (N.O) IF=0mA, IL=100mA (N.C) TON (N.O) TOFF (N.C) IF=10mA, VL=20V TOFF (N.O) IL=100mA, t=10ms TON (N.C) -3- Min. Typ. Max. Unit - 1.2 1.5 V - - 3.0 mA 0.2 - - mA 60 - - V 0.2 1.0 1.0 2.0 6 - 0.83 2.5 2.5 5.0 0.3 1.5 0.6 1.5 0.1 1.5 0.3 1.5 - - - μA pF Ω ms ms http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Turn-on / Turn-off Time N.O N.C Input Input 90% 10% Output Output Toff Ton 10% 90% Ton Toff z Schematic and Wiring Diagrams Output Configuration Schematic Load Connection Wiring Diagrams (1) Two independent 1 Form A & 1 Form B use VIN1 VIN2 1 2 3 8 VIN1 7 6 VIN2 1a + 1b AC DC I F1 I F2 I F1 I F2 1 8 2 7 3 6 4 5 1 8 2 7 3 6 4 5 I L1 I L2 I L1 I L2 V L1 (AC,DC) Load V L2 (AC,DC) Load Load Load V L1 (AC,DC) V L2 (AC,DC) - (2) 1 Form A & 1 Form B use 4 5 1 8 2 7 3 6 4 5 1 8 2 7 3 6 4 5 I L1 VIN IF I L2 VIN Cosmo Electronics Corp. Document No. 69M22001.2 -4- IF I L1 I L2 V L1 (AC,DC) Load V L2 (AC,DC) Load Load Load V L1 (AC,DC) V L2 (AC,DC) http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Fig.1 Load Current vs. Ambient Temperature Fig.2 On Resistance vs. Ambient Temperature 350 5 4 On Resistance (Ω) Load Current (mA) 300 250 200 150 100 50 0 -40 3 2 N .O 1 0 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) Reverse (On) Time (ms) Operate (Off) Time (ms) 0 .6 N .O 0 .4 0 .2 0 20 40 60 0 .4 LED Reverse (On) Current (mA) LED Operate (Off) Current (mA) N .O N .C 1 -20 0 20 40 60 80 Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69M22001.2 N .O -4 0 -2 0 0 20 40 60 80 Fig.6 LED Reverse (ON) Current vs. Ambient Temperature 4 -40 80 Ambient Temperature Ta (℃) 5 0 60 N .C 0 .2 80 Fig.5 LED Operate (OFF) Current vs. Ambient Temperature 2 40 0 .6 Ambient Temperature Ta (℃) 3 20 0 .8 0 -2 0 0 1 .0 N .C -4 0 -20 Fig.4 Reverse (ON) Time vs. Ambient Temperature 0 .8 0 -40 Ambient Temperature Ta (℃) Fig.3 Operate (OFF) Time vs. Ambient Temperature 1 .0 N .C 2 .5 2 .0 1 .5 N .O 1 .0 N .C 0 .5 0 -4 0 -2 0 0 20 40 60 80 Ambient Temperature Ta (℃) -5- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Fig.7 LED Dropout Voltage vs. Ambient Temperature Fig.8 Voltage vs. Current Characteristics of Output at MOFET Portion 300 250 1 .7 200 50m A 30m A 20m A 10m A 1 .5 1 .3 5m A 1 .1 N .C 100 -2 .5 -2 .0 -1 .5 -1 .0 -0 .5 50 0 .5 -5 0 1 .0 1 .5 2 .0 2 .5 -1 0 0 -1 5 0 0 .9 -2 0 0 -2 5 0 0 -3 0 0 -4 0 -2 0 0 20 40 60 80 Ambient Temperature Ta (℃) Voltage (V) Fig.9 Operate (OFF) Time vs. LED Forward Current Fig.10 Off-state Leakage Current Vs. Load Voltage Off-state Leakage Current (A) 1 .0 Operate (OFF) Time (ms) N .O 150 Current (mA) LED Dropout Voltage (V) 1 .9 0 .8 0 .6 0 .4 0 .2 N .C 0 N .O 0 10 20 30 40 50 60 LED Forward Current (mA) Load Voltage (V) Fig.11 Reverse (ON) Time vs. LED Forward Current. Fig.12 Output Capacitance vs. Applied Voltage Output Capacitance (PF) Reverse (ON) Time (ms) 0.5 0.4 N.C 0.3 0.2 N.O 0.1 0 50 40 30 20 10 0 0 10 20 30 40 50 60 LED Forward Current (mA) Cosmo Electronics Corp. Document No. 69M22001.2 0 10 20 30 40 60 80 Applied Voltage (V) -6- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Using Methods Examples of resistance value to control LED forward current (IF=5mA) R E R E 1 8 2 7 3 6 4 5 E 3.3V 5V 12V 15V 24V R Approx. 330 Ω Approx. 640 Ω Approx. 1.9K Ω Approx. 2.5K Ω Approx. 4.1K Ω 1. LED forward current must be more than 5mA，at E min. 2. LED forward current must be less than 50mA，at E max. Emax. Emin. Regulate the spike voltage generated on the inductive load as follows： 1 8 2 7 3 6 4 5 1 8 2 7 3 6 4 5 Load Load Load Load R-C Snubber Cosmo Electronics Corp. Document No. 69M22001.2 -7- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Recommended Soldering Conditions (a) Infrared reflow soldering： Peak reflow soldering： 260℃ or below (package surface temperature) Time of peak reflow temperature: 10 sec Time of temperature higher than 230℃： 30-60 sec Time to preheat temperature from 180~190℃： 60-120 sec Number of reflows： Two Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering： Temperature： 260℃ or below (molten solder temperature) Time： 10 seconds or less Preheating conditions: 120℃ or below (package surface temperature) Number of times： One Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions： Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69M22001.2 -8- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Numbering System KAQW612 X (Y) Note： KAQW612 = Part No. X = Lead form option ( blank、S or A ) Y = Tape and reel option ( TL、TR ) Option Description Packing quantity A (TL) surface mount type package + TL tape & reel option 1000 units per reel A (TR) surface mount type package + TR tape & reel option 1000 units per reel S (TL) S (TR) small outline for surface mount type package + 2000 units per reel TL tape & reel option small outline for surface mount type package + 2000 units per reel TR tape & reel option z Recommended Pad Layout for Surface Mount Lead Form 1. Surface mount type. 2. Small outline for surface mount type. 2.54 1.2 8.3 2.54 2.54 2.54 0.8 2.54 1.9 8-pin SOP 2.54 1.5 8-pin SMD 6 Unit：mm Cosmo Electronics Corp. Document No. 69M22001.2 -9- http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z 8-pin SMD Carrier Tape & Reel Unit：mm 7.50 10.35 12.00 10.35 2.00 16.0±0.30 1.75 4.00 0.35 4.90 TOLERANCE：±0.2mm TL TR Direction of feed from reel Direction of feed from reel 1.5 16.4 Cosmo Electronics Corp. Document No. 69M22001.2 - 10 - 2.0 http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Unit：mm 0.30 10.5 16.00±0.3 7.50 4.0 1.75 z 8-pin SOP Carrier Tape & Reel 2.4 12.00 TOLERANCE：±0.2mm 8.30 TL TR Direction of feed from reel Direction of feed from reel 1.5 16.4 Cosmo Electronics Corp. Document No. 69M22001.2 - 11 - 2.0 http://www.cosmo-ic.com KAQW612 Series 8PIN 60V N.O.+N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo z Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69M22001.2 - 12 - http://www.cosmo-ic.com