KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z z Description Schematic The KP4040 series consist of an infrared-emitting diode in a 16-pin DIP package and available in wide-lead spacing and SMD option. It features a high current transfer ratio, low coupling capacitance and high isolation voltage. 1、3、5、7 Anode 2、4、6、8 Cathode 9、11、13、15 Emitter 10、12、14、16 Collector z Features 1. Current transfer ratio ( CTR：Min. 600% at IF=1mA VCE=2V ) 2. High isolation voltage between input and output ( Viso：5000Vrms ) 3. Pb free and RoHS compliant. 4. Agency Approvals: • UL1577 / CUL C22.2 No.1 & NTC No.5, File No. E169586 • VDE EN60747, File No.101347 • FIMKO EN60065, File No. NCS/FI23149 A2 • FIMKO EN60950, File No. NCS/FI24584 A1 • SEMKO EN60065, File No. FI016484 • SEMKO EN60950, File No. FI016433 z Applications • System appliances, measuring instruments • Industrial robots • Copiers, automatic vending machines, facsimiles, telephone sets • Signal transmission between circuits of different potentials and impedances • Interface with various power supply circuits, power distribution boards • Numerical control machines Cosmo Electronics Corp. Document No. 69P23001.1 -1- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Unit : mm Outside Dimension 1.Dual-in-line type. 2.Surface mount type. KP4040 KP4040S 7.62 7.62 19.84 6.50 19.84 3.50 3.50 6.50 0.40 3.00 2.70 0~10° 0.25 1.00 0.10±0.1 1.20 10.00±0.4 0.25 0.50 13.00° 1.20 2.54 2.54 2.54 2.54 13.00° 4.Long creepage distance for surface mount type. 3.Long creepage distance type KP4040L KP4040H 10.16 7.62 7.62 19.84 6.50 19.84 10.16±0.50 3.50 0.90±0.25 1.20 0.50 0.90±0.25 11.80+0.2 -0.5 0~10° 0.25 ±0.2 2.70 0.30 0.25 3.00 3.50 6.50 1.20 2.54 2.54 2.54 TOLERANCE：±0.2mm z Device Marking Notes: cosmo cosmo 4040 YWW 4040 YWW Cosmo Electronics Corp. Document No. 69P23001.1 -2- Y: Year code / WW: Week code http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z (Ta=25℃) Absolute Maximum Ratings Parameter Input Output z Symbol Rating Unit Forward current IF 50 mA Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Collector-emitter voltage VCEO 300 V Emitter-collector voltage VECO 0.1 V Collector current IC 150 mA Collector power dissipation PC 200 mW Total power dissipation Ptot 200 mW Isolation voltage 1 minute Viso 5000 Vrms Operating temperature Topr -55 to +115 ℃ Storage temperature Tstg -55 to +125 ℃ Soldering temperature 10 seconds Tsol 260 ℃ (Ta=25℃) Electro-optical Characteristics Input Output Parameter Symbol Forward voltage VF Peak forward voltage VFM Conditions Min. Typ. Max. Unit IF=20mA - 1.2 1.4 V IFM=0.5A - - 3.5 V Reverse current IR VR=4V - - 10 μA Terminal capacitance Ct V=0, f=1KHz - 30 - pF Collector dark current ICEO VCE=200V, IF=0 - - 1 μA Current transfer ratio CTR IF=1mA, VCE=2V 600 - 9000 % - - 1.5 V - - Ω Collector-emitter saturation Isolation resistance Transfer charac- Floating capacitance teristics Cut-off frequency VCE(sat) IF=20mA, IC=5mA Riso 5x10 Cf V=0, f=1MHz - 0.6 1.0 pF fC VCC=5V, IC=2mA, RL=100Ω - 7 - KHz - 60 300 μs - 50 250 μs Response time ( Rise ) tr Response time ( Fall ) tf Cosmo Electronics Corp. Document No. 69P23001.1 DC500V 10 VCE=2V, IC=20mA, RL=100Ω -3- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo Fig.1 Current Transfer Ratio vs. Forward Current 0 0 0 5 0 0 0 1 0 1 5 2 1 5 . 0 2 . 0 1 . 0 0 Current Transfer Ratio CTR ( % ) C V' 25 =2 E= Ca VT 0 0 0 2 CTR ( % ) 600 ~9000 0 0 0 3 KP4040 Model No. KP4040 E 0 0 0 4 Classification table of current transfer ratio is shown below. Forward Current IF (mA) Fig.2 Collector Power Dissipation vs. Ambient Temperature Fig.3 Collector Dark Current vs. Ambient Temperature Collector Dark Current ICEO ( A ) Collector Power Dissipation PC ( mW ) -5 10 250 200 150 100 50 0 -55 10-6 -7 10 -8 10 -9 10 -10 10 -11 10 0 25 50 75 115 125 -55 Ambient Temperature Ta (℃) 50 75 115 Fig.5 Forward Current vs. Forward Voltage 500 Forward Current IF ( mA ) 60 Forward Current IF ( mA ) 25 0 Ambient Temperature Ta (℃) Fig.4 Forward Current vs. Ambient Temperature 50 40 30 20 10 0 -55 VCE =200V 0 25 50 75 100 50 Ta=75° C 50° C 25° C 0° C 20 -25° C 10 5 2 1 1.0 115 125 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Forward Voltage VF (V) Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69P23001.1 200 -4- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo Fig.6 Collector Current vs. Collector-Emitter Voltage 150 C ' 5 2 = a T 0 0 2 A m 3 A m 5 Relative Current Transfer Ratio ( % ) A m 0 1 = F I A m A 2 m 5 . 2 0 0 1 A m 5 . 1 A m 1 A m 5 . 0 0 Collector Current IC (mA) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature IF = 1 m A V CE =2V 100 50 5 4 3 2 1 0 0 -2 5 Collector-Emitter Voltage VCE (V) 0 25 50 75 115 Ambient Temperature Ta (℃) Fig.8 Collector-Emitter Saturation Voltage vs. Forward Current Fig.9 Response Time vs. Load Resistance C 5 2 = a T A m 5 = c I 4 A m 0 3 Response Time ( us ) A m 0 1 3 A m 0 5 A m 0 0 A 1 m 0 7 1 Collector-Emitter Saturation Voltage VCE ( V ) 5 500 2 tr 200 100 tf 50 20 10 0 5 5 4 3 2 1 0 2 1 0.01 Forward Current IF (mA) Cosmo Electronics Corp. Document No. 69P23001.1 Vce=2V Ic=20mA Ta=25°C 0.1 1 10 Load Resistance RL (KΩ) -5- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Test Circuit for Response Time c c V F I e c V L R F I % 0 9 e c V % 0 1 -6- f t r t Cosmo Electronics Corp. Document No. 69P23001.1 http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Recommended Soldering Conditions (a) Infrared reflow soldering： Peak reflow soldering： 260℃ or below (package surface temperature) Time of peak reflow temperature： 10 sec Time of temperature higher than 230℃： 30-60 sec Time to preheat temperature from 180~190℃： 60-120 sec Time(s) of reflow： Two Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering： Temperature： 260℃ or below (molten solder temperature) Time： 10 seconds or less Preheating conditions： 120℃ or below (package surface temperature) Time(s) of reflow： One Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions： Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69P23001.1 -7- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Numbering System KP4040 X Y (Z) Notes: KP4040 = Part No. X = Lead form option (0,S,H,L) Y = CTR rank (E) Z = Tape and reel option (TL,TR) Option Packing quantity S (TL) surface mount type package + TL tape & reel option 800 units per reel S (TR) surface mount type package + TR tape & reel option 800 units per reel L (TL) L (TR) z Description long creepage distance for surface mount type package + TL tape & reel option long creepage distance for surface mount type package + TR tape & reel option 800 units per reel 800 units per reel Recommended Pad Layout for Surface Mount Lead Form 2.Long creepage distance for surface m ount type. 16 pin L 1.Surface m ount type. 16 pin SM D Unit : mm Cosmo Electronics Corp. Document No. 69P23001.1 -8- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z 16-pin SMD Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P23001.1 -9- http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z 16-pin L Carrier Tape & Reel TOLERANCE：±0.2mm Cosmo Electronics Corp. Document No. 69P23001.1 - 10 - http://www.cosmo-ic.com KP4040 Series 16PIN PHOTODARLINGTON PHOTOCOUPLER cosmo z Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69P23001.1 - 11 - http://www.cosmo-ic.com