KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z Schematic z Description The KMOC3041 、 KMOC3042 、 KMOC3043 series consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon detector 1 6 2 performing the function of a zero voltage crossing bilateral TRIAC driver. They are designed for use 3 Z.C 4 with a TRIAC in the interface of logic systems to equipment powered from 115 VAC lines, such as 1. Anode solid-state 2. Cathode relays, industrial controls, motors, solenoids and consumer appliances, etc. 3. NC 4. Main terminal 6. Main terminal z Features 1. Pb free and RoHS compliant. 2. 400V peak blocking voltage. 3. Simplifies logic control of 115 VAC power. 4. Zero voltage crossing. 5. Isolation voltage between input and output (Viso：5300Vms). 6. Agency Approvals： • UL1577 , File No. E169586 • CUL C22.2 No.1 & NTC No.5, File No. E169586 • VDE EN60747-5-5, File No. 101347 z Applications • Solenoid/Valve controls • Lighting controls • Static power switches • AC motor drives • Temperature controls • E.M contactors • AC motor contactors • Solid state relay • Programmable controllers Cosmo Electronics Corp. Document No. 69P42001.1 -1- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z Outside Dimension Unit：mm 1. Dual-in-line type. 2. Surface mount type. KMOC3043S KMOC3043 7.62 7.62 6.50 6.50 7.30 3.50 3.50 7.30 0.10±0.1 1.00 10.00±0.4 0.50 1.20 0.25 0.25 2.70 0.40 3.00 0 ~ 10° 1.20 2.54 2.54 2.54 13.00 13.00 o 5.08 o 4. Long creepage distance for surface mount type. 3. Long creepage distance type. KMOC3043L KMOC3043H 7 .6 2 7 .3 0 6 .5 0 0.25 ±0.2 2 .7 0 0 .2 5 10 . 16 ± 0 .5 0 1.2 0 3.50 0 .3 0 0 ~ 10° 3 .0 0 3 .5 0 7.30 0 .5 0 1.20 2.54 5.08 2 .5 4 TOLERANCE ： ±0.2mm 5 .0 8 z Device Marking Notes： cosmo 3043 YWW cosmo 3041、3042、3043 YWW Cosmo Electronics Corp. Document No. 69P42001.1 -2- Y：Year code / W：Week code http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z Absolute Maximum Ratings (Ta=25℃) Parameter Input Output Symbol Rating Unit Forward current IF 50 mA Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 70 mW Off-state output terminal voltage VDRM 400 VPEAK On-state R.M.S. current IT(RMS) 100 mA Peak repetitive surge current (PW=10ms.DC 10%) ITSM 1 A Power dissipation PD 300 mW Total power dissipation Ptot 330 mW Isolation voltage 1 minute Viso 5300 Vrms Operating temperature Topr -40 to +115 ℃ Storage temperature Tstg -50 to +125 ℃ Soldering temperature 10 seconds Tsol 260 ℃ z Electro-optical Characteristics Parameter Forward voltage Input Reverse current Peak blocking current Output On-state voltage Holding current Symbol Conditions VF IF=10mA IR VR=4V IDRM VDRM Rated VTM ITM=100mA IH Critical rate of rise of off-state voltage Inhibit voltage (MT1-MT2 voltage Transfer above which device will not trigger) characteristics Leakage in inhibited state dv/dt VDRM=(1/ 2 )*Rated VINH IDRM2 Isolation resistance Riso Minimum trigger current IFT Min. - (Ta=25℃) Typ. Max. Unit 1.2 1.4 V 10 μA nA 500 1.8 3 V 0.1 mA 1000 - - V/μs IF= Rated IFT - 10 20 V IF=Rated IFT, Rated VDRM, Off State - - 500 μA 1011 - 15 10 5 Ω mA mA mA 5x1010 KMOC3041 Main terminal KMOC3042 voltage=3V KMOC3043 DC500V z Static dv/dt Test Circuit Vdc RTEST R=10KΩ CTEST PULSE INPUT MERCURY WETTED RELAY APPLIED VOLTAGE WAVEFORM D.U.T X100 SCOPE PROBE 0 VOLTS Vmax 0.63 Vmax dv/dt = 0.63 Vmax τRC τRC Cosmo Electronics Corp. Document No. 69P42001.1 -3- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo Fig.1 Forward Current vs. Ambient Temperature Fig.2 Diode Power Dissipation vs. Ambient Temperature Diode Power Dissipation PD (mW) Forward Current IF ( mA ) 60 50 40 30 20 10 0 -4 0 -2 0 0 20 40 60 80 100 115 120 100 80 70 60 40 20 0 -4 0 Ambient Temperature Ta (℃) 80 60 40 20 0 20 40 60 80 100 115 Total Power Dissipation PD (mW) On-state Current ITM ( mA ) 100 -2 0 500 400 330 300 200 100 0 -4 0 Forward Current IF ( mA ) Peak Forward Current IFT ( mA ) -2 -1 10 1 Duty Ratio Cosmo Electronics Corp. Document No. 69P42001.1 -2 0 0 20 40 60 80 100 115 500 100 10 100 115 1000 1000 -3 80 Fig.6 Forward Current vs. Forward Voltage Pulse width <= 100us Ta=25°C 10 60 Ambient Temperature Ta (℃) Fig.5 Peak Forward Current vs. Duty Ratio 10 40 600 Ambient Temperature Ta (℃) 10000 20 Fig.4 Total Power Dissipation vs. Ambient Temperature 120 -4 0 0 Ambient Temperature Ta (℃) Fig.3 On-state R.M.S. Current vs. Ambient Temperature 0 -2 0 25°C 200 Ta=75°C 50°C 100 50 0°C -25°C 20 10 5 2 1 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward Voltage (V) -4- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo Fig.7 On-state Characteristics +300 Output pulse width 80us IF=30mA, f=60Hz, Ta=25°C 1.4 1.3 +200 Vinh, Normalized On-state Current ITM ( mA ) +400 Fig.8 Inhibit Voltage vs. Ambient Temperature +100 0 -100 -200 1.1 1.0 0.9 0.8 0.7 0.6 -300 -400 1.2 -4 0 -3 -2 -1 0 1 2 -20 0 20 40 60 1 00 11 5 3 On-state Voltage (V) Ambient Temperature Ta (℃) Fig.9 Leakage with LED off Fig.10 IDRM2 ,Leakage in Inhibited State vs. Ambient Temperature vs. Ambient Temperature 1 .5 1000 IF T = R a te d IF T 1 .4 1 .3 IDRM2, Normalized Peak Blocking Current ( nA ) 80 100 10 1 .2 1 .1 1 .0 0 .9 0 .8 0 .7 0 .6 1 -4 0 -4 0 -2 0 0 20 40 60 80 -2 0 0 20 40 60 80 100 115 100 115 Ambient Temperature Ta (℃) Ambient Temperature Ta (℃) Fig.11 Trigger Current IFT, Normalized vs. Ambient Temperature N orm alized to Ta=25°C 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 -40 -20 0 20 40 60 80 100 115 Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69P42001.1 -5- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z Recommended Soldering Conditions (a) Infrared reflow soldering： Peak reflow soldering： 260℃ or below (package surface temperature) Time of peak reflow temperature： 10 sec Time of temperature higher than 230℃： 30-60 sec Time to preheat temperature from 180~190℃： 60-120 sec Time(s) of reflow： Two Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec M ax. temperature 260℃ 230℃ 190℃ 3 0 -6 0 s e c 180℃ 6 0 -1 2 0 s e c t (s ) (b) Wave soldering： Temperature： 260℃ or below (molten solder temperature) Time： 10 seconds or less Preheating conditions： 120℃ or below (package surface temperature) Time(s) of reflow： One Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions： Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69P42001.1 -6- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z Numbering System KMOC3041 X (Y) KMOC3042 X (Y) KMOC3043 X (Y) Notes： KMOC3041 / KMOC3042 / KMOC3043 = Part No. X = Lead form option ( blank、S、H、L ) Y = Tape and reel option ( TL、TR、TLD、TRU ) Option Description Packing quantity S (TL) surface mount type package + TL tape & reel option 1000 units per reel S (TR) surface mount type package + TR tape & reel option 1000 units per reel L (TLD) L (TRU) long creepage distance for surface mount type package + TLD tape & reel option long creepage distance for surface mount type package + TRU tape & reel option 1000 units per reel 1000 units per reel z Recommended Pad Layout for Surface Mount Lead Form 2. Long creepage distance for surface mount type. 1. Surface mount type. 5-pin L 1.9 2.67 1.5 1.9 2.54 1.5 5-pin SMD 8.3 10.7 Unit：mm Cosmo Electronics Corp. Document No. 69P42001.1 -7- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z SMD Carrier Tape & Reel unit：mm TOLERANCE：±0.2mm TL TR Direction of feed from reel Cosmo Electronics Corp. Document No. 69P42001.1 Direction of feed from reel -8- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z L Carrier Tape & Reel 4.0 1.8 Unit:mm 12.0 5° 7.6 12.2 24±0.3 11.5 2.0 0.4 4.15 TOLERANCE：±0.2mm TLD TRU 100±0.50 13.0 Direction of feed from reel 330 Max. Direction of feed from reel 24.40 30.40 Max. Cosmo Electronics Corp. Document No. 69P42001.1 -9- http://www.cosmo-ic.com KMOC304X Series 5PIN ZERO-CROSS TRIAC DRIVER PHOTOCOUPLER cosmo z Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69P42001.1 - 10 - http://www.cosmo-ic.com