cosmo G1A242000 Reed Relay Features Outside Dimension：Unit (mm) KUAN HSI 2. Sealed construction permits automatic flow soldering G1A242000 and cleaning. 7.0 Date Code 19.50 3. High reliability relay. 4. Cost effective. XXX 1. Molded epoxy body. 7.00 0.4 3.5 2.54 20.32 2.54 Schematic : Top View (+) 1 5 2 (-)3 Coil Ratings (AT 20℃) Parameter Rating Unit Coil Resistance 2080 Ω(±10%) Nominal Coil Voltage 24 VDC Maximum Continuous Voltage 30 VDC Must Operate 16.8 VDC Must Release 2.4 VDC Rated Current 11.5 mA Rating Unit 100 mΩ(max) Electrical Characteristics Parameter Contact Resistance Operate Time 0.5 ms(max) Bounce Time 0.5 ms(max) Release Time 0.2 ms(max) Insulation Resistance (100VDC) 10 11 Ω(min) Power 10 VA(max) Switching Voltage 200 VDC(max) Switching Current 0.5 A(max) Carry Current 1.0 A(max) Breakdown Voltage (Across Open Contact) 250 VDC(min) 1500 VDC(max) (Between Coil & Contact) Life Expectancy (Signal Level) 108 Operate Temp -40~85 ℃ Storage Temp -50~125 ℃ 3.5 KHz Resonant Frequency Vibration (10~200Hz) 20 g(max) Minimum Permissible Load 100 mVDC 10uA C 2005-2006 COSMO ELECTRONICS CORPORATION ○ http://www.cosmo-ic.com