SENSITRON SEMICONDUCTOR SPD-8A115 Datasheet 4119, Rev. C.1 AC/DC Solid State Power Controller Module Description: The Solid State Power Controller (SSPC) Module is a microcontroller based Solid State Relay designed to be used in Aircraft or Navy in 115VAC/150VDC applications. This module has integrated current sensing and over current / over temp protection. The module is equivalent to a DPST relay with a common single side isolated control. Compliant Documents & Standards: MIL-STD-167-1 (1) MIL-STD-217F P4855-1A Mechanical Vibrations of Shipboard Equipment 19 June 1987 Reliability Prediction of Electronic Equipment Notice 2 28 Feb 1995 Navy Power Supply Design and Reliability Guidelines (NAVMAT) January 1989 Module Features: • • • • • Epoxy shell construction Solid state reliability; Low weight (60 gms) High power density Similar footprint as a mechanical relay: 2.8”x1.15”x1.15” Single-in-line pins to ease pcb assembly Electrical Features: • • • • • • • • • • • • • • • • • 115VAC Input: Current rating of 8A with very low drop; 180mV typ Current rating upto 12A with drop @ 280mV Advanced TRUE I2t algorithm to compensate for different current waveforms 2-Pole operation: 500V DC isolation between poles High control circuit isolation: 1500V DC to either pole Cross-trip feature: Fault on one pole trips the other within 50 μsec Very low control current: 14 mA typ @ 24V True I2t Protection from 12A to 90A Instant Trip Protection (3 μsec typ) for loads over 100A High Overload Capability up to 250A; Repetitive Fault handling capability Built-in Transient Voltage Suppressor to handle Short Circuit Turn-Off Spikes Over-temperature Protection: 75 oC Amb typ Internally generated isolated supply to drive the switch Opto Isolated Control Signal input and Status output Soft Turn-on to reduce EMC issues Module Reset with a Low Level Signal; Trip Reset Circuit is Trip-Free Built-in Hysteresis and Noise Filtering to avoid nuisance Turn-ON/OFF • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SPD-8A115 Datasheet 4119, Rev. C.1 Electrical Characteristics Control & Status Vcc Control Vcc Current (from +24V) Alarm Out Signal Control signal Reset 24V DC Nominal 20V to 36V DC 14 mA typ 20 mA max ON: High (internal pull-up to +24V); Output can source upto 5 mA OFF: Logic Low Output shall remain below 2V sink upto 5 mA ON: Logic Low (internal pull-up to +24V) Turns ON when input is pulled below 4V Input current @ Control pin < 0.5 mA OFF: Open Turns OFF when input is float or pulled above 12V Thro cycling of Control signal Thro cycling of Vcc Power Input Voltage Power Dissipation Current (Pole #1 and Pole #2) Max Voltage Drop (Each Pole) Turn ON time (measured from Input Signal) Turn OFF time (measured from Input Signal) Time Difference at Turn-on between Poles Time Difference at Turn-off between Poles Min Trip current (Each Pole) Trip time 12A 20A 50A 90A 100A and above Repetitive Fault current Rating Output Rise Time (turn ON) Output Fall Time under normal turn-off Output Fall Time under Fault Min Load Requirement 0 to 170V DC 0 to 120V AC 10 Hz to 440 Hz < 2.5W @ 8A @ 70°C Amb per pole 8A Continuous 250A for 3 μsec 180 mV typ @ 8A, TA = 25 oC 260 mV max TA = -40 oC ~ 70 oC 3 msec max Both Poles turn-on together 50 μsec max Both Poles turn-off together 20 μsec max 20 μsec max 8.8A DC 8.8A AC RMS 320 msec ~ 846 msec 130 msec ~ 270msec 22 msec ~ 42 msec 7 msec ~ 13 msec Less than 3 μsec 250A 5 μsec typ 300 nsec typ 300 nsec typ Nil Protection Short Circuit Protection Upto 250A • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SPD-8A115 Datasheet 4119, Rev. C.1 Voltage Spikes OTP (Over Temperature Protection) threshold OTP response time External Transient Voltage Suppressor to handle short-circuit turn-off spike typ. 75 oC, min. 70 oC, max 80 oC typ. 5 sec Physical Characteristics Temperature Operating Temperature Storage Temperature TA = -40°C to +65°C TA = -55°C to +85°C Environmental Altitude Case Dimensions Operating Orientation Weight MTBF (Estimate: MIL STD 217F) Upto 30,000 ft Can be installed in an unpressurized area 2.8”L x 1.15”W x 1.15”H Any 60 grams typ 100,000 hrs at 25°C Full load Mechanical Dimensions (in Inches) • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SPD-8A115 Datasheet 4119, Rev. C.1 • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SPD-8A115 Datasheet 4119, Rev. C.1 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •