SENSITRON ________ SEMICONDUCTOR SBR1002A TECHNICAL DATA DATASHEET 5378, REV. C THREE PHASE FULL WAVE BRIDGE RECTIFIER ASSEMBLY WITH AlSiC TECHNOLOGY DESCRIPTION: 1400 V, 45 A, 850 nsec THREE PHASE BRIDGE RECTIFIER ASSEMBLY o MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at TA = 25 C unless otherwise specified. RATING CONDITIONS MIN TYP MAX UNIT o 1400 - - Vdc o 1400 - - Vdc o - - 45 A Non-Repetitive Peak Inverse Voltage (PIV) TJ = -55 C Repetitive Peak Inverse Voltage (PIV) TJ = -40 C Average DC Output Current TC = 55 C (TC = Case Temp) (Io) o TC = 100 C 28 o TC = 125 C Average DC Output Current (TA = Ambient Temp) o TA = 25 C 16 - TA = 55 C TA = 100 C Peak Single Cycle Surge Current (IFSM) t =1.25ms single square wave TC = 25°C TC =150°C t = 8.3ms 60Hz single pulse sine wave TC =25°C Junction temperature Case temperature Material temperature A 5.0 2.5 A 700 570 400 325 TC =150°C 2 8.0 O (no heat sink) (Io) Energy Rating I t - O T =1.25ms single square wave TC = 25°C TC =150°C TJ TOP TSTG 2 As 612 405 -55 -55 -55 +175 +150 +150 0 - 1.30 1.90 1.15 1.85 - - 10 C Maximum Forward Voltage (VF) (300 s pulse, duty cycle < 2%) TC = 25 C, IF = 9A 0 TC = 25 C, IF = 45A 0 TC = 125 C, IF = 9A 0 TC = 125 C, IF = 45A Maximum Instantaneous Reverse Current at Rated PIV TA = 25 C Reverse Recovery Time (tRR) IF = 0.5A, IR = 1.0A, 0 IRR = 0.25A, TC = 25 C - - 850 nsec Junction Capacitance (CJ) VR =100V, f= 1MHz - 40 - pF Thermal Resistance (JL) Per Leg - - 4.0 C/W 0 - 0 0 TA = 100 C V A 100 ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SBR1002A SENSITRON TECHNICAL DATA DATASHEET 5378, REV. C Mechanical Characteristics: RATING CONDITIONS MIN TYP MAX UNIT All Leads - Base Plate - 2000 - V - 10 - 50 In-lb. Max Acceleration 20 C - Weight - - 16 - gms - 750 - Cycles Isolation Voltage 60Hz, 60S Mounting Torque 0 0 0 Life thermal Cycling -40 C to 125 C (Qualification test only) Note: Add a suffix S to the part number for S-100 Screening. m/s2 Lend Bend Options: SBR1002A Straight Leads SBR1002A-1 Leads Bent Down SBR1002A-2 Leads Bent Up ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SBR1002A SENSITRON TECHNICAL DATA DATASHEET 5378, REV. C MECHANICAL DIMENSIONS: In Inches DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]