SDA1001SS

SDA1001SS
TECHNICAL DATA
DATASHEET 5324, Rev A
Diode Array





Each leg has two 1N5806 diodes for redundancy
Die manufactured on qualified JANS line
Devices Are Serialized
Built And Screened To Space Level Quality
Space Quality Level Conformance Testing Is Performed On Each Lot
O
MAX. RATINGS / ELECTRICAL CHARACTERISTICS
All rating at are TA = 25 C unless otherwise specified
RATING
SYMBOL
MAX
UNIT
Peak Inverse Voltage (DC)
Average DC Output Current per leg *
TA = 55oC
TA = 100oC
Peak Single Cycle Surge Current per leg **
(Tp=8.3ms single half-Sine wave)
Max. Operating Junction Temperature
Max. Operating Ambient Temperature
PIV
300
V
IO
1.0
0.75
A
Ifsm
10
A
TJ
-55 to +150
o
-30 to 100
o
-65 to +175
o
TOP
Storage Temperature Range
Tstg
Maximum forward voltage @ 1A
Vf
Maximum Instantaneous Reverse Current At
TA= 25oC
Rated (PIV)
TA = 100oC
Max. Reverse Recovery Time IF =0.5 A, IR=
trr
1.0A, IRR =0.25A
Thermal Resistance Junction to Case
JC
Note * - Total current is package dissipation limited to 3A
Note ** - Surge rating is limited by package wirebond
C
C
C
2.0
1
50
V
A
45
13
ns
o
C/W
Electrical Schematic
PIN 1
©2015 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798  www.sensitron.com  [email protected]
SDA1001SS
TECHNICAL DATA
DATASHEET 5324, Rev A
Mechanical Outline
.450 ±.012
PIN 1
.015
.400
MAX
.050
.285
MAX
.125
MAX
.038 ±.008
.005+.003
-.001
.015±.005
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2015 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798  www.sensitron.com  [email protected]