Sharma Electrolytic Capacitor FV Series ■ Features • Lifetime:85℃,3000~5000hrs • Long life for GV • Low profile vertical chip ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) Leakage Current (Max) (20℃) Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +85℃ 4 6.3 10 16 25 35 5 8 13 20 32 44 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 50 63 Shown in the table of standard rating WV 4 6.3 10 16 25 35 50 Z(120Hz) Z(-25℃) / Z(20℃) 7 4 3 2 2 2 2 Z(-40℃) / Z(20℃) 15 8 6 4 4 3 3 After applying rated voltage for 3000 ~ 5000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within ±20% of the initial value Case (ψ) Life time (hrs) Not move than 200% of the specified ψD≦6.3 Dissipation Factor 3000 value Leakage Current Not more than the specified value ψD≧8 5000 After placed at 85℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life Applicable standards Dimensions (mm) ψD L A H I W P 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 K 0.35 +0.15 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 ( ) : Reference size Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 60 0.80 120 1.00 ≦50 1.36 1K 1.15 70 1.25 SECI Engineers & Buyers' Guide 10K~100K 1.25 85 1.00 Fax: (949)642-7327 Sharma Electrolytic Capacitor Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanä / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV SPEC 4 ESR 4.7 4x5.4 0.16 20 45.1 10 0.16 0.26 0.16 0.26 0.16 0.16 28 27 39 45 66 70 21.1 ESR RC ESR ψDxL 16 RC RC ψDxL tanä 10 ESR ψDxL tanä μF ΨDxL tanä 6.3 tanä RC 4x5.4 0.30 28 18.0 7.33 4x5.4 5x5.4 5x5.4 0.30 0.20 0.30 29 43 43 12.0 8.03 8.46 4x5.4 4x5.4 5x5.4 5x5.4 6.3x5.4 6.3x5.4 71 3.44 6.3x5.4 0.26 70 3.44 6.3x5.4 0.20 70 2.65 0.35 250 2.11 8x6.2 0.26 250 1.56 8x10.2 0.20 280 1.20 8x6.2 0.35 300 1.40 8x10.2 0.26 330 1.04 10x10.2 0.20 380 0.803 470 8x10.2 0.35 380 0.987 10x10.2 0.26 400 0.733 10x10.2 0.20 420 0.564 1000 10x10.2 0.35 700 0.464 10x10.2 0.26 580 0.344 tanä RC ESR 22 4x5.4 0.35 19 21.1 4x5.4 0.26 20 15.6 33 4x5.4 0.35 26 14.0 5x5.4 0.26 22 10.4 47 4x5.4 0.35 34 9.87 5x5.4 0.26 46 100 5x5.4 0.35 61 4.64 6.3x5.4 0.26 220 6.3x5.4 0.35 82 2.11 8x6.2 330 WV SPEC μF 25 ψDxL tanä 35 RC ESR ψDxL tanä 50 RC ESR ψDxL 0.1 4x5.4 0.12 1 1593 0.22 4x5.4 0.12 2 723 0.33 4x5.4 0.12 3 482 0.47 4x5.4 0.12 5 338 1 4x5.4 0.12 10 159 2.2 4x5.4 0.12 8 72.3 4x5.4 0.12 16 72.3 3.3 4x5.4 0.12 10 48.2 4x5.4 0.12 16 48.2 5x5.4 0.12 23 33.8 6.3x5.4 0.12 35 15.9 8x6.2 0.12 110 7.23 4.7 10 22 33 4x5.4 0.14 22 39.5 4x5.4 0.12 22 33.8 4x5.4 5x5.4 6.3x5.4 0.20 0.14 0.14 24 28 55 26.5 18.5 8.44 4x5.4 5x5.4 6.3x5.4 0.16 0.12 0.12 24 30 60 21.2 15.9 7.23 8x6.2 0.14 130 5.62 8x10.2 0.12 120 4.82 8x6.2 0.14 165 3.95 10x10.2 0.12 130 3.38 6.3x5.4 0.14 65 5.62 100 6.3x5.4 8x6.2 8x10.2 0.20 0.16 0.16 70 96 180 5.64 4.51 2.12 10x10.2 0.14 210 1.85 10x10.2 0.12 190 1.59 220 10x10.2 0.16 310 0.964 10x10.2 0.14 310 0.844 10x10.2 0.12 300 0.723 47 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 15.6 10.4 6.43 4.51