Sharma Aluminum Electrolytic Capacitors Quick Reference Series General Purpose Features GR 85'C, 2000hrs SM 105'C, 2000hrs BM 105'C, 2000hrs, Shorter profile for SM Long Life 105'C, 2000~5000hrs Long life FM Low Profile 85'C, 1000hrs, Miniature for 7mm/9mm height SS 105'C, 1000hrs, Miniature for 7mm/9mm height SX 85'C, 1000hrs, Ultra-miniature for 5mm height SF 105'C, 1000hrs, Ultra-miniature for 5mm height FX Low Leakage Current 85'C, 1000hrs LL 105'C, 1000hrs LX 85'C, 1000hrs, Miniature for 7mm height SL 105'C, 1000hrs, Miniature for 7mm height SH Low Impedance 105'C, 2000hrs LZ 105'C, 2000hrs LB 105'C, 5000hrs LC 105'C, 1000~5000hrs Low Impedance & Long life LU 105'C, 2000hrs Ultra low ESR LW Bi/Non Polar 85'C, 1000hrs, Non-polar RN 105'C, 1000hrs, Non-polar RX 85'C, 1000hrs, Non-polar, Miniature for 7mm height SN 105'C, 1000hrs, Non-polar, Miniature for 7mm height SP 85'C, 1000hrs, Non-polar for crossover & speaker network RB 85'C, 1000hrs, Bi-polar, Horizontal correction BP 105'C, 1000hrs, Bi-polar, Horizontal correction BX Snap-in Terminal TW 85'C, 2000hrs HW 105'C, 2000hrs DW 105'C, 2000hrs,20mm height SW 105'C, 3000hrs, 20mm height &Long life Electric Double Layer Capacitors 60'C, 2.5V, 1000hrs EL 60'C, 2.5V, 1000hrs, High capacitance EG SMD Chip Type 85'C, 2000hrs, Low profile GV 85'C, 3000~5000hrs, Long life FV 105'C, 1000hrs, Low profile SV 105'C, 2000hrs, Long Life DV 85'C, 1000hrs, Non-polar RV 105'C, 1000hrs, Low impedance ZV 105'C, 1000hrs, Ultra Low impedance EV WVDC Capacitance Temp Range Page 6.3~100 160~450 0.1~22000 6.3~100 160~400 450 0.1~15000 6.3~100 160~250 10~15000 -40~+85'C -25~+85'C -55~+105'C -40~+105'C -25~+105'C -40~+105'C -25~+105'C 10~250 0.47~4700 -55~+105'C 15 4~63 4~63 4~50 4~50 0.1~470 0.1~470 0.1~330 0.1~330 -40~+85'C -40~+105'C -40~+85'C -40~+105'C 17 19 21 23 6.3~100 6.3~100 4~63 4~63 0.1~15000 0.1~15000 0.1~220 0.1~220 -40~+85'C -40~+105'C -40~+85'C -40~+105'C 25 27 29 31 6.3~50 4.7~10000 160~450 2.2~220 160~450 3.3~330 6.3~100 5.6~6800 4~16 470~3300 -55~+105'C -40~+105'C -40~+105'C -55~+105'C -40~+105'C 33 35 37 39 42 6.3~250 6.3~250 4~63 4~63 25~100 25~50 25~50 -40~+85'C -40~+105'C -40~+85'C -40~+105'C -40~+85'C -40~+85'C -40~+105'C 44 46 48 50 52 54 56 10~100 160~450 10~100 160~450 10~100 160~450 10~100 160~450 0.47~6800 0.47~6800 0.1~100 0.1~100 1~33 1~33 1~100 9 11 13 27~10000 -40~+85'C -25~+85'C -40~+105'C -25~+105'C -40~+105 -25~+105 -40~+105 -25~+105 2.5 2.5 7~54 4~70 -25~+60'C -25~+60'C 74 75 4~100 4~100 4~100 6.3~100 6.3~50 4~50 6.3~25 0.1~1000 0.1~1000 0.1~1000 0.1~1000 0.22~47 0.1~1000 4.7~1000 -40~+85'C -40~+85'C -40~+105'C -40~+105'C -40~+85'C -40~+105'C -40~+105'C 76 78 80 82 84 86 88 56~56000 56~68000 27~10000 58 63 68 71 Page 1 Sharma Components Page 2 Part Number Instruction 1 2~3 4~6 7 8~10 11~12 13 14 15~17 18 19 E GR 107 M 6R3 S1 A 1 C11 0 RH TYPE SERIES CAP TOL. VOLTAGE LEAD SPEC. SLEEVE CASE OTHERS RoHS Code 1 Type Code Model Type E Standard Type V SMD (V-Chip) Type L Snap-in Type Code 2~3 Series Name (as content page 3&4) Code 4~6 Capacitance 0.47μF = 4.7μF = 47μF = 470μF = 4700μF = Code 7 Code 8~10 Tel: (949)642-7324 474 475 476 477 478 M = ±20% , K = ±10% ,V = +20~-10% Tolerance Voltage 6.3V 63V 100V 450V = = = = 6R3 063 100 450 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Components Code 11~12 Page 3 Lead Process Explanation for code 11° (also see Diagram below) S : Standard C : Straight cut T : Ammo tape K : Kink(Crimp)cut R : Reel tape F : Forming cut Description 0 Standard SMD type 1 Standard Dip & Snap-in type 1 Standard ammo tape (pitch 5mm for dia .~ 13mm) T 2 Ammo tape with straight lead (available for dia. 4~8mm) 4 Ammo forming tape with pitch 2.5mm (available for dia.4~5mm) 1 Standard reel tape (pitch 5mm for dia.~ 10mm) R 2 Reel tape with straight lead (available for dia. 4~8mm) 3 Reel forming tape with pitch 2.5mm (available for dia.4~5mm ) Code 11&12 Description Straight cut lead with L : 3.2+/-0.2mm 3 S 5 Straight cut lead with L : 4.0+/-0.2mm 7 Straight cut lead with L : 5.0+/-0.2mm K 2 Kink cut lead with L : 4.5+/-0.5mm F 6 Forming cut lead with L : 4.0+/-0.3 (Pitch : 5mm) C Code 13 Special specification A : Standard B : DF (tanδ) C : ESR Code 14 D : Impedance E : Ripple current F : Leakage current Sleeve code Code Series Color 1 GR,SR Royal blue with white printing 3 LL,LX,SL,SH Orange with black printing 5 SM,BM,LM,HM,FM,AM,SS,SX SF,FX,RN,RX,SN,SP,BP,BX,TW,HW Black with white printing 6 LB,LH,LY,LZ Black with golden printing H LW Royal blue with golden printing N DV,FV,GV,SV,RV,ZV (SMD standard pack) Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Components Code 15~17 Page 4 Case size code For Dip & Snap-in type Code A05 B05 B07 C05 C07 C11 E05 E07 E11 G07 Size (mm) 3*5 4*5 4*7 5*5 5*7 5*11 6.3*5 6.3*7 6.3*11 8*7 Code G09 G11 G14 G16 G20 H1C H15 H16 H17 H20 Size Code (mm) 8*9 H25 8*11 H30 8*14 L13 8*16 L16 8*20 L20 10*12.5 L25 10*15 L32 10*16 L36 10*17 M16 10*20 M26 Size (mm) 10*25 10*30 13*13 13*16 13*20 13*25 13*32 13*36 16*16 16*26 Code M32 M36 M40 N32 N36 N40 Q25 Q30 Q35 Q40 Size (mm) 16*32 16*36 16*40 18*32 18*36 18*40 22*25 22*30 22*35 22*40 Code Q45 Q50 R25 R30 R35 R40 R45 R50 S25 S30 Size (mm) 22*45 22*50 25*25 25*30 25*35 25*40 25*45 25*50 30*25 30*30 Code S35 S40 S45 S50 T25 T30 T35 T40 T45 T50 For SMD type Code Size (mm) A01 B01 C01 E01 3*5.4 4*5.4 5*5.4 6.3*5.4 8*6.2 Code 18 Other special instruction (“ 0 ” for standard) Code 19 Blank for Standard; “RH” for RoHS Compliant Tel: (949)642-7324 G02 G03 H03 8*10.2 10*10.2 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Size (mm) 30*35 30*40 30*45 30*50 35*25 35*30 35*35 35*40 35*45 35*50 Sharma Components Page 5 Detailed Diagrams for Code 11-12 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Sharma Components Tel: (949)642-7324 SECI Engineers & Buyers' Guide Page 6 Fax: (949)642-7327 Sharma Components Tel: (949)642-7324 SECI Engineers & Buyers' Guide Page 7 Fax: (949)642-7327 Sharma Components Page 8 Symbol W A B Po±0.1 P1 P2±0.1 F ψDo t1 E t2 ψ4x5.4 12.0 4.7 4.7 4.0 8.0 2.0 5.5 1.5+0.1-0 0.4 1.75 5.8 ψ5x5.4 12.0 5.7 5.7 4.0 12.0 2.0 5.5 1.5+0.1-0 0.4 1.75 5.8 ψ6.3x5.4 16.0 7.0 7.0 4.0 12.0 2.0 7.5 1.5+0.1-0 0.4 1.75 5.8 ψ8x6.2 16.0 8.7 8.7 4.0 12.0 2.0 7.5 1.5+0.1-0 0.4 1.75 6.8 ψ8x10.2 24.0 8.7 8.7 4.0 16.0 2.0 11.5 1.5+0.1-0 0.4 1.75 11.0 ψ10x10.2 24.0 10.7 10.7 4.0 16.0 2.0 11.5 1.5+0.1-0 0.4 1.75 11.0 Size Packaging Specification Size (mm) ψ4x5.4 ψ5x5.4 ψ6.3x5.4 ψ8x6.2 ψ8x10.2 ψ10x10.2 Q'ty per reel 2,000 1,000 1,000 1,000 500 500 Tel: (949)642-7324 Inner carton / measurement (mm) 20,000 390x195x395 10,000 390x195x395 10,000 390x235x405 10,000 390x235x405 4,000 390x255x405 4,000 390x255x405 SECI Engineers & Buyers' Guide Outer carton / measurement (mm) 40,000 420x410x414 20,000 420x410x414 20,000 420x410x492 20,000 420x410x492 8,000 420x410x530 8,000 420x410x530 Fax: (949)642-7327 Sharma Electrolytic Capacitors GR Series ■ Features • Lifetime:85℃,2000hrs • General purpose ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Characteristics ±20% (M) (120Hz,20℃) 6.3~100VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV Low Temperature Stability Impedance Ratio (Max) 16 20 25 32 35 44 50 63 63 100 160 79 125 200 200 250 250 300 350 400 400 450 450 500 I≦0.01CV or3μA whichever is greater I≦0.03CV+10μA (After rated voltage applied for 2 minutes) (After rated voltage applied for 3 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 10 8 13 160~450VDC -25 ~ +85℃ WV tanδ 6.3 10 0.24 0.20 16 25 0.16 0.14 35 50 0.12 0.10 63 100 160 0.10 0.10 0.20 200 250 0.20 0.20 350 400 0.24 0.24 450 0.24 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 Z (120Hz) 10 16 25 35 50 63 100 160 200 250 350 400 450 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 4 3 2 2 2 2 2 2 3 3 3 4 4 8 6 4 4 3 3 3 3 After applying rated voltage for 2000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life . 4 - Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 5 6.3 8 10 13 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ψd 0.5 0.5 0.6 0.6 0.8 0.8 a 1.0 1.0 1.0 1.0 2.0 2.0 0.6 (0.8) 2.0 ( ) : L≧30 Multiplier for Ripple Current Frequency coefficient Freq.(Hz) WV Cap ( μF ) (VDC) 0.1~82 6.3~100 100~820 1000~22000 160~450 0.47~1000 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.36 50 120 1K 10K 0.75 0.80 0.85 0.80 1.00 1.00 1.00 1.00 1.57 1.34 1.13 1.40 2.00 1.50 1.15 1.60 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 9 Sharma Electrolytic Capacitors Case Size &Max Ripple Current CASE SIZE (ψDxL(mm)) & MAX PERMISSIBLE RIPPLE CURRENT(RC(mArms) / 120Hz,85℃) WV 6.3 SPEC 10 0.1 5x11 1 5x11 1 0.22 5x11 2 5x11 2 0.33 5x11 3 5x11 3 0.47 5x11 5 5x11 5 1 5x11 10 5x11 10 2.2 5x11 20 5x11 20 3.3 5x11 30 5x11 30 4.7 10 RC ψDxL 63 RC RC ψDxL 50 ψDxL RC ψDxL 35 RC RC ψDxL 25 ψDxL μF ψDxL 16 RC 5x11 45 5x11 45 5x11 50 5x11 50 55 5x11 60 5x11 70 5x11 75 5x11 50 5x11 22 5x11 65 5x11 75 5x11 75 5x11 85 5x11 95 5x11 100 5x11 120 33 5x11 80 5x11 85 5x11 95 5x11 105 5x11 110 5x11 130 6.3x11 145 47 5x11 95 5x11 105 5x11 110 5x11 120 5x11 135 6.3x11 170 8x11 195 100 5x11 135 5x11 155 5x11 160 6.3x11 195 6.3x11 220 8x11 270 10x12.5 325 220 5x11 240 6.3x11 255 8x11 265 8x11 330 10x15 390 10x17 500 10x20 580 330 6.3x11 300 8x11 355 8x11 375 8x14 450 10x17 500 10x20 600 13x20 780 470 6.3x11 390 8x11 425 8x11 450 10x15 640 10x20 760 13x20 880 13x25 990 1000 10x12.5 550 10x12.5 665 10x17 800 10x20 900 13x25 1170 13x30 1360 16x32 1770 2200 10x20 935 10x20 1000 13x20 1200 13x25 1450 16x32 1840 16x36 1940 18x40 2170 3300 13x20 1290 13x20 1330 13x25 1550 16x26 1850 16x36 2130 18x40 2460 4700 13x20 1420 13x25 1850 13x30 1880 16x36 2360 18x36 2530 6800 16x26 1980 16x26 2030 16x32 2360 16x40 2540 10000 16x36 2170 18x36 2390 15000 18x36 2430 18x36 2630 22000 18x40 2650 18x45 2900 100 WV SPEC 160 200 250 350 400 450 ψDxL RC ψDxL RC ψDxL RC ψDxL RC ψDxL RC ψDxL RC ψDxL RC 0.47 5x11 5 5x11 5 5x11 5 5x11 5 5x11 5 6.3x11 5 6.3x11 5 μF 1 5x11 10 5x11 15 5x11 15 6.3x11 15 6.3x11 15 6.3x11 15 8x11 15 2.2 5x11 20 6.3x11 30 6.3x11 30 6.3x11 30 8x11 30 8x11 30 10x12.5 30 3.3 5x11 30 6.3x11 45 6.3x11 45 8x11 45 8x14 45 10x15 45 10x15 45 4.7 5x11 50 6.3x11 55 8x11 70 8x11 70 10x12.5 70 10x15 70 10x17 70 10 6.3x11 85 10x15 120 10x17 135 10x17 145 10x17 155 10x20 170 13x20 180 22 8x11 135 10x17 190 10x17 205 10x20 230 13x20 265 13x25 305 16x26 365 33 10x15 195 10x20 240 13x20 300 13x25 360 13x25 365 16x26 430 16x36 530 47 10x15 265 13x20 325 13x25 385 13x25 420 16x26 460 16x26 470 100 10x20 385 16x26 600 16x26 610 16x32 650 18x36 700 18x36 850 220 13x30 750 16x32 810 18x36 960 18x36 1020 330 16x26 870 18x36 1090 18x40 1360 470 16x36 1190 18x45 1510 1000 18x45 2140 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 10 Sharma Electrolytic Capacitors SM Series Specifications ■ Features • Lifetime:105℃,2000hrs • Wide temperature range for GR • General purpose Items Rated Voltage Range (WV) Operating Temperature Range WV SV 6.3 8 10 13 16 20 25 32 35 44 50 63 63 100 79 125 160 200 200 250 250 300 350 400 400 450 450 500 I≦0.01CV or3μA whichever is greater I≦0.03CV+10μA (After rated voltage applied for 2 minutes) (After rated voltage applied for 3 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Characteristics ±20% (M) (120Hz,20℃) 6.3~100 VDC 160~400 VDC / 450 VDC -55 ~ +105℃ -40 ~ +105℃/ -25 ~ +105℃ Capacitance Tolerance Surge Voltage (V) (20℃) ■ • • • WV 6.3 tanδ 0.26 Low Temperature Stability Impedance Ratio (Max) 10 16 25 0.22 0.18 0.16 35 0.14 50 0.12 63 0.10 100 0.10 160 0.15 200 0.15 250 0.15 350 0.20 400 0.20 450 0.20 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 10 Z(120Hz) 16 25 35 50 63 100 160 200 250 350 400 450 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 4 3 2 2 2 2 2 2 3 3 3 4 8 6 4 4 3 3 3 3 After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. 4 - 4 - Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 5 6.3 8 10 13 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ψd 0.5 0.5 0.6 0.6 0.8 0.8 a 1.0 1.0 1.0 1.0 2.0 2.0 0.6 (0.8) 2.0 ( ) : L≧30 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV Cap ( μF ) (VDC) 0.1~82 6.3~100 100~820 1000~22000 160~450 0.47~330 Temperature coefficient ≦50 Ambient Temperature (℃) Coefficient 1.90 Tel: (949)642-7324 50 120 1K 10K 0.75 0.80 0.85 0.80 1.00 1.00 1.00 1.00 1.57 1.34 1.13 1.40 2.00 1.50 1.15 1.60 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 11 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105℃) WV 6.3 SPEC ψDxL μF 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 15000 22000 5x11 5x11 5x11 6.3x11 8x11 8x11 8x14 10x12.5 10x17 10x20 13x20 13x20 16x26 16x36 18x36 18x40 SPEC 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 680 1000 RC 60 75 110 190 270 330 410 440 620 750 1040 1140 1590 1950 2340 2560 16 ψDxL 5x11 5x11 5x11 5x11 6.3x11 8x11 8x11 8x14 10x15 10x17 10x20 13x20 13x25 16x26 18x36 18x36 100 WV μF 10 RC 60 70 85 130 210 290 340 440 560 640 810 1060 1490 1620 2180 2410 160 25 ψDxL 5x11 5x11 5x11 5x11 6.3x11 8x11 8x11 8x11 8x14 10x17 13x20 13x20 13x25 13x30 16x32 18x36 RC 45 65 75 95 155 215 300 365 460 645 800 970 1240 1560 1890 2220 200 35 ψDxL 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11 8x14 10x15 10x17 10x20 13x25 16x26 16x32 16x36 RC 35 50 70 85 105 160 270 365 510 555 715 1040 1280 1570 1790 50 ψDxL 5x11 5x11 5x11 5x11 6.3x11 8x11 10x15 10x17 10x20 10x20 13x25 16x26 16x32 16x36 250 RC 40 50 75 95 120 190 350 450 610 725 935 1160 1470 1700 350 63 ψDxL RC ψDxL RC 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 8x11 10x17 10x20 13x20 13x20 13x30 16x32 16x36 1 2 3 5 10 20 30 45 55 85 105 135 220 400 520 705 815 1040 1410 1570 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11 8x11 10x12.5 10x20 13x20 13x25 16x26 16x32 16x36 1 2 3 5 10 20 30 50 60 95 120 160 290 470 630 790 1030 1320 1470 400 450 ψDxL RC ψDxL RC ψDxL RC ψDxL RC ψDxL RC ψDxL RC ψDxL RC 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11 10x15 10x15 10x20 13x30 16x26 16x36 18x36 18x45 5 10 20 30 50 70 110 160 215 305 605 700 990 1270 1740 5x11 5x11 6.3x11 8x11 8x11 10x15 10x17 10x20 13x20 16x26 16x32 18x40 5 15 30 45 55 100 155 195 265 475 650 910 5x11 5x11 6.3x11 8x11 8x11 10x17 10x20 13x20 13x25 16x26 18x36 5 15 30 45 60 120 170 255 305 485 765 6.3x11 6.3x11 8x11 8x11 10x12.5 10x17 10x20 13x25 13x25 16x32 5 15 30 45 70 120 190 305 340 530 6.3x11 6.3x11 8x11 10x12.5 10x12.5 10x17 13x20 13x25 16x26 18x36 5 15 30 45 70 130 215 310 375 580 8x11 8x11 10x12.5 10x15 10x17 10x20 13x25 16x26 16x36 18x36 5 15 30 45 70 135 240 360 435 680 8x11 8x11 10x12.5 10x15 10x17 13x20 16x26 16x36 18x36 5 15 30 45 70 170 300 425 545 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 12 Sharma Electrolytic Capacitors BM Series ■ Features • Lifetime:105℃,2000hrs • Wide temperature range for SR • Shorter profile for SM • General purpose ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Characteristics ±20% (M) (120Hz,20℃) 6.3~100 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 6.3 8 16 20 25 32 35 44 50 63 63 79 100 125 160 200 200 250 250 300 I≦0.01CV or3μA whichever is greater I≦0.03CV+10μA (After rated voltage applied for 2 minutes) (After rated voltage applied for 3 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) WV tanδ Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 10 13 160~250 VDC -25 ~ +105℃ 6.3 0.26 10 0.22 16 0.18 25 0.16 35 0.14 50 0.12 63 0.10 100 0.10 160 0.15 200 0.15 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 Z (120Hz) Low Temperature Stability Impedance Ratio (Max) 10 16 25 35 50 63 100 160 200 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 4 3 2 2 2 2 3 3 3 4 8 6 4 4 3 3 4 4 4 5 After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃ without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life 250 0.15 250 4 5 Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 10 13 16 18 P 5.0 5.0 7.5 7.5 ψd 0.6 0.6 0.8 0.8 a 1.0 2.0 2.0 2.0 Multiplier for Ripple Current Frequency coefficient WV (VDC) 6.3~100 160~250 Freq. (Hz) Cap (μF) 10~82 100~820 1000~10000 10~100 50 120 1K 10K~100K 0.75 0.80 0.85 0.80 1.00 1.00 1.00 1.00 1.57 1.34 1.13 1.40 2.00 1.50 1.15 1.60 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 13 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(mArms) / 120Hz,105℃) 6.3 WV SPEC μF 10 ψDxL RC 16 ψDxL RC 25 ψDxL RC 35 ψDxL RC ψDxL 50 RC 100 220 330 470 270 10x12.5 195 13x16 375 10x12.5 360 10x12.5 400 13x16 510 13x16 555 16x16 460 10x12.5 410 10x12.5 440 13x16 610 13x16 650 16x16 730 16x20 710 18x20 1050 18x26 970 520 13x16 730 16x20 940 16x20 870 2200 13x16 790 13x16 850 16x16 1000 16x20 1140 18x20 1290 3300 16x16 1070 16x16 1100 16x20 1280 18x26 1530 4700 16x16 1170 18x20 1560 18x26 1760 6800 16x20 1430 18x20 1630 10000 18x26 1810 18x26 1900 100 160 200 250 ψDxL RC ψDxL RC ψDxL RC 10 10x12.5 95 10x12.5 100 10x12.5 110 22 13x16 170 13x16 180 13x16 205 RC 10x12.5 RC 450 10x12.5 ψDxL ψDxL 13x16 440 SPEC RC 325 10x12.5 μF ψDxL 10x12.5 1000 WV 63 33 10x12.5 145 13x16 215 13x16 240 16x16 270 47 13x16 255 13x16 250 16x16 290 18x16 340 100 13x16 325 16x20 425 18x20 470 18x26 520 220 18x20 620 330 18x26 750 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 14 Sharma Electrolytic Capacitors FM ■ Features • Lifetime:105℃, 2000~ 5000hrs • Wide temperature range • Long life Series Specifications ■ Recommended Applications • Circuit for control(Low voltage) • Electronic Ballast(High voltage) • SMPS Items Characteristics ±20% (M) (120Hz,20℃) 10~250 VDC -55 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 10 13 25 32 35 44 50 63 63 79 100 125 160 200 200 250 250 300 I≦0.01CV or3μA whichever is greater I≦0.03CV+10μA (After rated voltage applied for 2 minutes) (After rated voltage applied for 3 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) WV tanδ Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 16 20 10 0.30 16 0.25 25 35 50 63 100 160 200 0.22 0.18 0.15 0.15 0.15 0.20 0.20 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life 10 Z (120Hz) 16 25 35 50 63 100 160 200 Z(-40℃) / Z(20℃) Z(-55℃) / Z(20℃) 3 2 2 2 2 2 2 2 2 9 6 6 5 5 5 5 5 5 After applying rated voltage for 5000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±30% of the initial value Dissipation Factor Not more than 300% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current ψD 8 10 13 16 18 P 3.5 5.0 5.0 7.5 7.5 ψd 0.6 0.6 0.6 (0.8) 0.8 0.8 a 1.0 1.0 2.0 2.0 2.0 ( ) : L≧30 Frequency coefficient Freq.(Hz) Cap (μF) 0.47~82 50 120 1K 10K 0.75 1.00 1.57 2.00 10~100 100~820 0.80 1.00 1.34 1.50 160~250 1000~4700 0.47~100 0.85 0.80 1.00 1.00 1.13 1.40 1.15 1.60 WV (VDC) Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 15 250 0.20 250 2 5 Sharma Electrolytic Capacitors Case Size / Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(mArms) / 120Hz,105℃) 10 WV SPEC 35 5 1 8x11 15 2.2 8x11 30 3.3 8x11 45 RC ψDxL RC ψDxL 100 8x11 RC ψDxL 63 0.47 RC ψDxL 50 RC RC ψDxL 25 ψDxL μF ψDxL 16 RC 4.7 8x11 70 8x11 70 8x11 70 10 8x11 85 8x11 90 8x11 105 22 8x11 130 8x11 135 10x15 190 33 47 8x11 150 10x12.5 175 10x12.5 190 10x20 240 8x11 160 8x11 170 10x12.5 225 10x12.5 250 13x20 365 100 8x11 210 8x11 220 10x12.5 275 10x12.5 295 10x17 390 10x20 450 16x26 570 220 10x12.5 350 10x12.5 360 10x17 470 10x20 500 13x20 630 13x25 760 16x32 890 330 10x15 490 10x17 520 10x20 620 13x20 740 13x25 840 16x26 1030 16x36 1050 470 10x17 600 10x20 710 13x20 840 13x25 1000 16x26 1100 16x32 1260 1000 13x20 960 13x25 1130 16x26 1300 16x26 1310 16x36 1630 18x40 2000 2200 16x26 1470 16x26 1815 16x36 1910 18x36 2100 3300 16x32 1910 16x36 2160 18x40 2340 4700 16x36 2630 18x36 2650 160 WV SPEC RC 0.47 8x11 5 1 8x11 15 RC ψDxL 250 ψDxL μF ψDxL 200 RC 2.2 8x11 30 8x11 30 10x12.5 30 3.3 10x12.5 45 10x12.5 45 10x15 45 4.7 10x12.5 70 10x17 70 10x17 70 10 10x17 135 10x20 160 13x20 180 22 13x20 240 13x25 280 13x25 305 33 13x25 315 16x26 400 16x26 430 47 16x26 410 16x26 450 16x32 560 100 16x36 710 18x36 770 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 16 Sharma Electrolytic Capacitors SS Series ■ • • • Features Lifetime:85℃,1000hrs Low profile/Miniature 7mm/9mm height ■ • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Small signal Specifications Items Characteristics ±20% (M) (120Hz,20℃) 4~63 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 WV tanδ 4 0.35 6.3 0.24 WV Low Temperature Stability Impedance Ratio (Max) Z (120Hz) 10 0.20 4 16 0.16 6.3 25 0.14 10 35 0.12 16 25 50 0.10 35 63 0.08 50 63 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 6 4 3 2 2 2 2 12 8 6 4 4 4 4 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than in specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 2 4 Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 4 5 6.3 8 P 1.5 2.0 2.5 ψd 0.45 0.5 0.5 a 1.0 1.0 1.0 3.5 0.5 (0.6) 1.0 ( ):L=9 Multiplier for Ripple Current Frequency coefficient Freq.(Hz) WV (VDC) 4~16 25~35 50~63 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.50 1.60 1.20 1.70 1.90 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 17 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) WV SPEC 4 25 2.2 4x7 10 3.3 4x7 10 4.7 4x7 10 RC 22 ψDxL 16 RC RC ψDxL 10 ψDxL μF ψDxL 6.3 RC 35 ψDxL RC ψDxL RC 20 4x7 20 4x7 25 4x7 30 4x7 35 4x7 40 4x7 35 4x7 40 4x7 50 5x7 60 33 4x7 35 4x7 40 4x7 45 4x7 50 5x7 65 6.3x7 75 47 4x7 40 4x7 50 4x7 60 5x7 70 6.3x7 75 6.3x7 80 100 5x7 65 5x7 80 5x7 90 6.3x7 110 8x7 120 8x7 145 220 6.3x7 110 6.3x7 120 6.3x7 135 8x7 180 330 8x7 170 8x9 170 8x9 230 470 8x9 230 8x9 240 8x9 280 WV SPEC μF 50 63 ψDxL RC ψDxL RC 0.1 4x7 1 4x7 1 0.22 4x7 2 4x7 2 0.33 4x7 3 4x7 3 0.47 4x7 5 4x7 5 1 4x7 10 4x7 10 2.2 4x7 20 4x7 20 3.3 4x7 25 4x7 30 4.7 4x7 35 5x7 40 10 5x7 45 6.3x7 55 22 6.3x7 70 33 8x7 85 47 8x7 100 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 18 Sharma Electrolytic Capacitors SX Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for SS • Low profile/Miniature • 7mm/9mm height ■ • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Small signal Items Characteristics ±20% (M) (120Hz,20℃) 4~63 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) (20℃) Leakage Current (Max) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 WV tanδ 4 0.35 6.3 0.24 WV Low Temperature Stability Impedance Ratio (Max) Z (120Hz) 10 0.20 4 16 0.16 6.3 25 0.14 10 35 0.12 16 25 50 0.10 35 50 63 0.08 63 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 6 4 3 2 2 2 2 12 8 6 4 4 4 4 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 2 4 Satisfied JIS C 5101 Applicable standards Dimensions (mm) ψD 4 5 6.3 8 P 1.5 2.0 2.5 ψd 0.45 0.5 0.5 a 1.0 1.0 1.0 3.5 0.5 (0.6) 1.0 ( ):L=9 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~16 25~35 50~63 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.50 1.60 1.20 1.70 1.90 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 19 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105℃) WV SPEC 4 25 2.2 4x7 10 3.3 4x7 10 4.7 4x7 10 RC 22 ψDxL 16 RC RC ψDxL 10 ψDxL μF ψDxL 6.3 RC 35 ψDxL RC ψDxL RC 15 4x7 20 4x7 25 4x7 25 4x7 30 4x7 35 4x7 30 4x7 35 5x7 50 6.3x7 60 33 4x7 30 4x7 35 4x7 40 5x7 50 6.3x7 65 6.3x7 70 47 4x7 35 5x7 50 5x7 60 6.3x7 70 6.3x7 70 8x7 80 100 5x7 55 5x7 70 6.3x7 90 8x7 110 8x7 115 8x9 145 220 6.3x7 95 6.3x7 110 8x7 135 8x9 180 330 8x7 150 8x9 160 8x9 210 470 8x9 200 8x9 210 WV SPEC 50 63 ψDxL RC ψDxL RC 0.1 4x7 1 4x7 1 0.22 4x7 2 4x7 2 0.33 4x7 3 4x7 3 0.47 4x7 5 4x7 5 1 4x7 10 4x7 10 2.2 4x7 20 4x7 20 3.3 4x7 25 4x7 25 4.7 4x7 30 5x7 35 10 5x7 40 6.3x7 50 22 6.3x7 65 33 8x7 80 47 8x9 100 μF Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 20 Sharma Electrolytic Capacitors SF Series ■ • • • Features Lifetime:85℃,1000hrs Low profile/Ultra -miniature 5mm height Specifications ■ • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Small signal Items Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 6.3 8 10 13 16 20 25 32 35 44 50 63 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 WV tanδ 4 0.35 WV Low Temperature Stability Impedance Ratio (Max) Z (120Hz) 6.3 0.24 10 0.20 4 6.3 16 0.16 10 25 0.14 16 35 0.12 25 50 0.10 35 50 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 6 4 3 2 2 2 12 8 6 4 4 4 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD P ψd a 4 1.5 0.45 1.0 5 2.0 0.45 1.0 6.3 2.5 0.45 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~16 25~50 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 1.00 1.00 1.10 1.50 1.20 1.70 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 21 2 4 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) 4 WV SPEC 0.22 4x5 2 0.33 4x5 3 0.47 4x5 5 1 4x5 10 2.2 4x5 15 3.3 4x5 20 4.7 10 RC RC 4x5 10 4x5 15 4x5 20 5x5 25 4x5 20 4x5 20 4x5 25 4x5 30 5x5 35 6.3x5 40 6.3x5 55 6.3x5 60 22 4x5 25 4x5 30 5x5 30 5x5 35 5x5 40 33 4x5 30 5x5 35 5x5 40 5x5 45 6.3x5 60 47 5x5 35 5x5 40 6.3x5 50 6.3x5 60 100 6.3x5 60 6.3x5 70 6.3x5 75 6.3x5 95 220 6.3x5 80 6.3x5 95 Tel: (949)642-7324 ψDxL 50 1 RC ψDxL 35 4x5 RC ψDxL 25 0.1 RC ψDxL 16 RC RC ψDxL 10 ψDxL μF ψDxL 6.3 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 22 Sharma Electrolytic Capacitors FX Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for SF • Low profile/Ultra -miniature • 5mm height ■ • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Small signal Items Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 4 5 10 13 16 20 25 32 35 44 50 63 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 WV tanδ 4 0.35 WV Low Temperature Stability Impedance Ratio (Max) Z (120Hz) 6.3 0.24 10 0.20 4 6.3 16 0.16 25 0.14 10 16 35 0.12 25 50 0.10 35 50 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 6 4 3 2 2 2 12 8 6 4 4 4 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD P ψd a 4 1.5 0.45 1.0 5 2.0 0.45 1.0 6.3 2.5 0.45 1.0 8 2.5 0.45 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~16 25~50 50 120 1K 10K 0.80 0.80 1.00 1.00 1.10 1.50 1.20 1.70 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 23 2 4 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(mArms) / 120Hz,105℃) 4 WV SPEC μF 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 ψDxL 4x5 4x5 5x5 6.3x5 6.3x5 8x5 6.3 RC 20 25 30 50 70 110 ψDxL 4x5 4x5 5x5 5x5 6.3x5 8x5 8x5 Tel: (949)642-7324 10 RC 15 25 30 35 60 95 120 ψDxL 4x5 5x5 5x5 6.3x5 6.3x5 16 RC 20 25 35 45 70 ψDxL 4x5 4x5 5x5 5x5 6.3x5 6.3x5 25 RC 10 20 30 40 55 90 ψDxL 4x5 4x5 6.3x5 6.3x5 SECI Engineers & Buyers' Guide 35 RC 15 25 40 50 ψDxL 4x5 5x5 6.3x5 50 RC ψDxL RC 15 30 45 4x5 4x5 4x5 4x5 4x5 4x5 4x5 5x5 6.3x5 6.3x5 1 2 3 5 10 15 15 20 35 55 Fax: (949)642-7327 Page 24 Sharma Electrolytic Capacitors LL Series ■ Features • Lifetime:85℃,1000hrs • Low leakage current ■ • • • • Specifications Recommended Applications AV(TV, Video, Audio) OA/HA/Communication Hi- Fi Pre-Amp Timer/Oscillation circuit Items Characteristics ±20% (M) (120Hz,20℃) 6.3~100 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV Low Temperature Stability Impedance Ratio (Max) 10 13 16 20 25 32 35 44 50 63 63 79 80 100 100 125 I≦0.002CV or 0.4μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 WV tanδ 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 When rated capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV Z (120Hz) Z(-25℃) / Z(20℃) 100 0.07 6.3 10 16 25 35 50 63 80 100 4 3 2 2 2 2 2 1.5 1.5 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current ψD 5 6.3 8 10 13 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ψd 0.5 0.5 0.6 0.6 0.6 0.8 (0.8) 0.8 a 1.0 1.0 1.0 1.0 2.0 2.0 ( ) : L≧30 Frequency coefficient Freq. (Hz) WV (VDC) 6.3~10 16~25 35~50 63~100 50 120 1K 10K 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00 1.10 1.20 1.50 1.60 1.20 1.30 1.70 1.90 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 25 2.0 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(mArms) / 120Hz,85℃) WV 6.3 SPEC μF 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 5x11 5x11 5x11 6.3x11 6.3x11 8x11 10x12.5 13x20 13x20 16x26 16x26 16x32 18x36 SPEC 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 RC 65 80 110 190 230 320 550 1090 1290 1870 2120 2600 3230 ψDxL 6.3x11 8x11 8x11 10x12.5 10x17 13x20 13x25 16x26 18x36 16 ψDxL 5x11 5x11 5x11 5x11 6.3x11 8x11 8x11 10x17 13x20 13x25 16x26 16x32 18x36 80 WV μF ψDxL 10 RC 60 70 85 120 210 290 350 700 1180 1520 2000 2470 3090 ψDxL 5x11 5x11 5x11 5x11 6.3x11 8x11 8x11 10x12.5 10x17 13x25 16x26 16x32 18x36 18x40 25 RC 45 65 80 95 160 270 330 460 780 1420 1890 2370 2970 3430 ψDxL 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11 10x12.5 10x17 13x20 16x26 16x32 18x36 18x40 35 RC 35 50 70 85 100 170 290 410 570 1040 1810 2170 2780 3230 ψDxL 5x11 5x11 5x11 5x11 6.3x11 8x11 10x12.5 10x17 10x20 13x25 16x32 18x36 18x40 50 RC 40 55 75 90 120 210 360 520 660 1230 1980 2590 3060 63 ψDxL RC 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 6.3x11 8x11 10x17 10x20 13x20 16x26 18x36 1 2 3 5 10 20 30 40 60 85 110 135 225 460 610 850 1560 2400 ψDxL 5x11 40 5x11 55 6.3x11 100 6.3x11 120 8x11 160 10x12.5 270 10x20 500 13x20 710 13x25 930 16x32 1710 100 RC 70 120 150 210 350 650 880 1200 2140 ψDxL RC 5x11 5x11 5x11 5x11 5x11 6.3x11 8x11 10x12.5 10x17 13x20 16x26 16x26 16x32 5 10 20 30 45 75 130 180 260 460 880 1080 1400 Tel: (949)642-7324 SECI Engineers & Buyers' Guide RC Fax: (949)642-7327 Page 26 Sharma Electrolytic Capacitors LX Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for LL • Low leakage current ■ • • • • Recommended Applications AV(TV, Video, Audio) OA/HA/Communication Hi- Fi Pre-Amp Timer/Oscillation circuit Items Characteristics ±20% (M) (120Hz,20℃) 6.3~100 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 10 13 16 20 25 32 35 44 50 63 63 79 80 100 100 125 I≦0.002CV or 0.4μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 WV tanδ Low Temperature Stability Impedance Ratio (Max) 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 When rated capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV Z (120Hz) 6.3 10 16 25 35 50 63 100 0.07 80 100 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 4 3 2 2 2 2 2 1.5 8 6 4 4 3 3 3 2 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the initial specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 1.5 2 Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current ψD 5 6.3 8 10 13 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ψd 0.5 0.5 0.6 0.6 0.6 0.8 (0.8) 0.8 a 1.0 1.0 1.0 1.0 2.0 2.0 ( ) : L≧30 Frequency coefficient Freq. (Hz) WV (VDC) 6.3~10 16~25 35~50 63~100 50 120 1K 10K 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00 1.10 1.20 1.50 1.60 1.20 1.30 1.70 1.90 85 1.40 105 1.00 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 27 2.0 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105℃) 6.3 WV SPEC 16 1 0.22 5x11 2 0.33 5x11 3 0.47 5x11 5 1 5x11 10 2.2 5x11 20 3.3 5x11 30 4.7 10 22 RC ψDxL 63 5x11 RC ψDxL 50 0.1 RC ψDxL 35 RC RC ψDxL 25 ψDxL μF ψDxL 10 RC ψDxL RC 5x11 30 5x11 35 5x11 35 5x11 35 5x11 55 5x11 50 5x11 40 5x11 40 5x11 45 5x11 50 5x11 55 5x11 60 5x11 65 5x11 75 6.3x11 80 33 5x11 55 5x11 60 5x11 70 5x11 75 5x11 80 6.3x11 100 6.3x11 100 47 5x11 65 5x11 75 5x11 85 5x11 90 6.3x11 110 6.3x11 120 8x11 140 100 5x11 95 5x11 110 6.3x11 140 6.3x11 140 8x11 180 8x11 200 10x12.5 230 220 6.3x11 165 6.3x11 180 8x11 230 8x11 250 10x12.5 320 10x17 400 10x20 430 330 6.3x11 195 8x11 250 8x11 280 10x12.5 360 10x17 450 10x20 520 13x20 610 470 8x11 270 8x11 300 10x12.5 400 10x17 490 10x20 570 13x20 730 13x25 800 1000 10x12.5 465 10x17 600 10x17 660 13x20 880 13x25 1060 16x26 1330 16x32 1460 2200 13x20 925 13x20 1000 13x25 1210 16x26 1550 16x32 1700 18x36 2100 3300 13x20 1100 13x25 1300 16x26 1610 16x32 1860 18x36 2200 4700 16x26 1600 16x26 1700 16x32 2020 18x36 2380 18x40 2610 6800 16x26 1810 16x32 2100 18x36 2520 18x40 2770 10000 16x32 2210 18x36 2630 18x40 2910 15000 18x36 2760 80 WV SPEC μF ψDxL 100 RC ψDxL RC 0.47 5x11 5 1 5x11 10 2.2 5x11 20 3.3 5x11 30 4.7 5x11 40 10 6.3x11 60 6.3x11 65 22 8x11 110 8x11 115 33 8x11 130 10x12.5 160 47 10x12.5 180 10x17 230 100 10x17 310 13x20 410 220 13x20 560 16x26 750 330 13x25 750 16x26 920 470 16x26 1020 16x32 1200 1000 18x36 1830 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 28 Sharma Electrolytic Capacitors SL Series Specifications ■ • • • • Features Lifetime:85℃,1000hrs Low leakage current Low profile/Miniature 7mm height ■ • • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Hi- Fi Pre-Amp Timer/Oscillation circuit Items Characteristics ±20% (M) (120Hz,20℃) 4~63 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I≦0.002CV or 0.4μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 WV tanδ 4 0.35 WV Low Temperature Stability Impedance Ratio (Max) Z (120Hz) 6.3 0.24 4 10 0.20 6.3 16 0.16 10 25 0.14 35 0.12 16 25 50 0.10 35 50 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 6 4 3 2 2 2 2 12 8 6 4 4 3 3 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD P ψd a 4 1.5 0.45 1.0 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~10 16~25 35~63 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.20 1.50 1.20 1.30 1.70 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 29 63 0.08 63 2 3 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) 4 WV SPEC μF ψDxL 6.3 RC ψDxL 10 RC ψDxL 16 RC ψDxL 25 RC ψDxL 35 RC 4.7 10 ψDxL RC 4x7 25 4x7 25 4x7 30 4x7 30 5x7 35 22 4x7 30 4x7 35 4x7 40 4x7 45 5x7 55 6.3x7 55 33 4x7 40 4x7 45 5x7 50 5x7 60 5x7 65 6.3x7 70 47 4x7 45 5x7 50 6.3x7 60 6.3x7 65 6.3x7 80 100 5x7 75 5x7 80 6.3x7 90 6.3x7 95 220 6.3x7 125 6.3x7 135 6.3x7 145 50 WV SPEC 63 ψDxL RC ψDxL RC 0.1 4x7 1 4x7 1 0.22 4x7 2 4x7 2 0.33 4x7 3 4x7 3 0.47 4x7 5 4x7 5 μF 1 4x7 15 4x7 15 2.2 4x7 20 4x7 25 3.3 4x7 25 5x7 30 4.7 5x7 30 6.3x7 35 10 6.3x7 45 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 30 Sharma Electrolytic Capacitors SH Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for SL • Low leakage current • Low profile/Miniature • 7mm height ■ • • • • Recommended Applications AV(TV, Video, Audio) OA/HA/Communication Hi- Fi Pre-Amp Timer/Oscillation circuit Items Characteristics ±20% (M) (120Hz,20℃) 4~63 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I≦0.002CV or 0.4μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 WV tanδ 4 0.35 6.3 0.24 WV Low Temperature Stability Impedance Ratio (Max) Z (120Hz) 10 0.20 4 6.3 16 0.16 10 25 0.14 35 0.12 16 25 50 0.10 35 63 0.08 50 63 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 6 4 3 2 2 2 2 12 8 6 4 4 3 3 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 2 3 Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD P ψd a 4 1.5 0.45 1.0 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 8 3.5 0.5 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~10 16~25 35~63 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.20 1.50 1.20 1.30 1.70 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 31 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105℃) WV SPEC μF 4 ψDxL 6.3 RC ψDxL 10 RC ψDxL 16 RC ψDxL 25 RC ψDxL 35 RC 4.7 10 ψDxL RC 4x7 20 4x7 25 4x7 25 4x7 25 5x7 30 22 4x7 25 4x7 30 4x7 35 4x7 35 5x7 45 6.3x7 45 33 4x7 35 4x7 40 5x7 40 5x7 50 5x7 55 6.3x7 60 47 4x7 40 5x7 45 6.3x7 50 6.3x7 55 6.3x7 70 100 5x7 70 5x7 75 6.3x7 80 6.3x7 85 220 6.3x7 115 6.3x7 125 8x7 150 WV SPEC 50 63 ψDxL RC ψDxL RC 0.1 4x7 1 4x7 1 0.22 4x7 2 4x7 2 0.33 4x7 3 4x7 3 0.47 4x7 5 4x7 5 μF 1 4x7 15 4x7 15 2.2 4x7 20 4x7 20 3.3 4x7 20 5x7 25 4.7 5x7 25 6.3x7 30 10 6.3x7 40 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 32 Sharma Electrolytic Capacitors LZ Series ■ • • • ■ • • • • • • Features Lifetime:105℃,2000hrs Wide temperature range Low Impedance Specifications Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Converter/Inverter Adapter SMPS Items Characteristics ±20% (M) (120Hz,20℃) 6.3~50 VDC -55 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 10 13 16 20 25 32 35 44 50 63 63 79 100 125 I≦0.01CV or3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 6.3 0.22 WV tanδ Low Temperature Stability Impedance Ratio (Max) 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 0.09 100 0.08 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 Z (120Hz) 10 16 25 35 50 63 100 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 4 3 3 3 3 2 2 8 6 4 4 4 4 4 After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. 2 4 Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 5 6.3 8 10 13 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ψd 0.5 0.5 0.6 0.6 0.6 0.8 (0.8) 0.8 a 1.0 1.0 1.0 1.0 2.0 2.0 ( ) : L≧30 Multiplier for Ripple Current Frequency coefficient Frequency (Hz) 50 Coefficient 0.45 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 120 0.55 ≦50 1.90 1K 0.75 70 1.75 SECI Engineers & Buyers' Guide 10K 0.85 85 1.40 100K 1.00 105 1.00 Fax: (949)642-7327 Page 33 2.0 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / Impedance CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 100KHz,105℃) / MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) 6.3 WV SPEC 4.7 5x11 100 1.20 10 5x11 120 0.90 22 5x11 170 0.42 33 5x11 180 0.42 RC Z 47 RC Z ψDxL 35 Z Z ψDxL 25 RC RC ψDxL 16 ψDxL μF ψDxL 10 RC Z 5x11 150 0.50 5x11 170 0.42 6.3x11 200 0.36 100 5x11 170 0.42 6.3x11 250 0.25 8x11 310 0.22 8x11 400 0.14 220 6.3x11 260 0.22 8x11 400 0.14 8x14 560 0.10 10x12.5 650 0.085 330 6.3x11 250 0.25 8x11 400 0.14 8x14 560 0.10 10x16 820 0.069 10x20 1070 0.044 470 8x11 400 0.14 8x14 560 0.10 10x12.5 680 0.085 10x16 900 0.068 10x25 1110 0.039 1000 8x14 700 0.10 10x16 900 0.068 10x20 1110 0.044 13x20 1200 0.038 13x25 1460 0.029 1200 10x16 810 0.064 10x20 1070 0.044 13x20 1200 0.038 13x25 1460 0.029 13x30 1670 0.025 1500 10x20 1070 0.044 10x25 1110 0.039 13x20 1420 0.036 13x30 1670 0.026 16x32 2150 0.024 2200 10x25 1100 0.042 13x20 1200 0.038 13x25 1670 0.030 13x36 2150 0.022 16x36 2530 0.019 3300 13x20 1250 0.038 13x25 1470 0.030 13x36 1890 0.022 16x36 2270 0.019 18x36 3100 0.016 4700 13x30 1740 0.025 13x36 1890 0.022 16x36 1920 0.019 6800 16x26 1930 0.022 16x36 1920 0.019 10000 16x36 2210 0.019 50 WV SPEC 63 100 ψDxL RC Z ψDxL RC Z ψDxL RC Z 4.7 5x11 85 2.00 5x11 90 2.00 5x11 95 2.00 10 5x11 100 1.70 5x11 110 2.00 6.3x11 120 1.00 22 5x11 150 0.70 6.3x11 180 1.00 8x11 220 0.53 33 6.3x11 190 0.65 6.3x11 200 0.90 8x14 260 0.40 47 6.3x11 220 0.52 8x11 260 0.80 10x20 400 0.35 100 8x14 440 0.25 10x15 540 0.30 13x20 720 0.20 220 10x16 530 0.20 10x20 620 0.090 16x26 950 0.070 330 10x25 810 0.072 13x25 990 0.060 16x32 1310 0.050 470 13x20 950 0.065 16x26 1460 0.050 18x32 1650 0.045 1000 16x26 1370 0.039 16x32 1780 0.030 1200 16x32 1630 0.025 1500 16x36 1800 0.025 μF Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 34 Sharma Electrolytic Capacitors LB Series ■ • • • ■ • • • • • • Features Lifetime:105℃,2000hrs Wide temperature range Low Impedance Specifications Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Converter/Inverter SMPS Ballast Items Characteristics ±20% (M) (120Hz,20℃) 160~450VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) WV tanδ 160 0.15 200 0.15 WV Low Temperature Stability Impedance Ratio (Max) 200 250 250 300 350 400 400 450 450 500 I≦0.03CV +10μA (After rated voltage applied for 3 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 160 200 250 0.15 160 Z (120Hz) 200 350 0.24 400 0.24 250 350 450 0.24 400 450 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 3 3 3 3 3 3 6 6 6 6 6 6 After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not More than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 10 13 16 18 P 5.0 5.0 7.5 7.5 ψd 0.6 0.6 (0.8) 0.8 0.8 a 1.0 2.0 2.0 2.0 ( ) : L≧30 Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient <33μF ≧33μF 50 0.45 0.60 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 120 0.55 0.70 ≦50 1.90 1K 0.75 0.90 70 1.75 SECI Engineers & Buyers' Guide 10K 0.85 0.95 85 1.40 100K 1.00 1.00 105 1.00 Fax: (949)642-7327 Page 35 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / Impedance CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC (mArms) / 120Hz&100KHz,105℃) / MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) 160 WV SPEC μF ψDxL 200 RC 120Hz 100KHz Z ψDxL 250 RC 120Hz 100KHz Z 10 ψDxL RC 120Hz 100KHz Z 10x20 120 220 2.80 22 10x20 195 350 1.00 10x20 195 350 1.00 13x25 165 300 1.40 33 13x20 315 450 0.71 13x20 365 520 0.71 13x25 280 400 1.20 47 13x25 420 600 0.46 13x25 420 600 0.46 16x26 505 720 0.50 68 13x25 420 600 0.45 16x26 665 950 0.25 16x32 570 810 0.22 100 16x26 665 950 0.24 16x32 840 1200 0.17 18x36 735 1050 0.20 220 18x36 980 1400 0.14 WV SPEC μF ψDxL 350 400 RC RC 120Hz 100KHz Z ψDxL 450 120Hz 100KHz Z ψDxL RC 120Hz 100KHz Z 2.2 10x16 30 50 3.50 10x16 80 140 4.20 10x16 60 110 7.90 3.3 10x16 35 60 3.50 10x20 110 195 2.90 10x20 75 135 6.20 4.7 10x20 45 78 2.50 10x25 120 220 2.30 13x20 105 190 3.70 10 13x20 75 130 1.40 13x25 200 360 1.30 13x25 140 250 2.60 22 16x26 115 205 0.73 16x26 315 570 0.65 16x32 265 480 1.00 33 16x32 180 255 0.65 16x32 490 700 0.46 18x36 455 650 0.65 47 18x32 225 320 0.50 18x32 600 860 0.33 100 18x45 370 530 0.45 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 36 Sharma Electrolytic Capacitors LC Series ■ • • • • Features Lifetime:105℃,5000hrs Wide temperature range Low ESR Low Impedance Specifications ■ • • • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Converter/Inverter SMPS Ballast Items Characteristics ± 2 0% (M) (120Hz,20℃) 160~450VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 160 200 250 300 350 400 400 450 450 500 I≦0.03CV +40μA (CV≦1000) I≦0.02CV +25μA (CV>1000) (After rated voltage applied for 5 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) WV 160 200 250 350 400 450 tanδ 0.15 0.15 0.15 0.24 0.24 0.24 WV Low Temperature Stability Impedance Ratio (Max) 200 250 Z (120Hz) Z(-40℃) / Z(20℃) 160 200 250 350 400 450 6 6 6 6 6 6 After applying rated voltage for 5000 hours at 105℃, the capacitor shall meet the following requirement. Within ± 20% of the initial value Capacitance Change Dissipation Factor Not more than 200% of the specified value Leakage Current Not More than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life Load Life Shelf Life Satisfied JIS C 5101 Others Dimensions (mm) ψD 10 13 16 18 P 5.0 5.0 7.5 7.5 ψd 0.6 0.6 (0.8) 0.8 0.8 a 1.0 2.0 2.0 2.0 ( ) : L≧ Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient 50 0.45 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 120 0.55 ≦50 1.90 1K 0.75 70 1.75 SECI Engineers & Buyers' Guide 10K 0.85 85 1.40 100K 1.00 105 1.00 Fax: (949)642-7327 Page 37 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / Impedance CASE SIZE (ψDxL)/ MAX PERMISSIBLE RIPPLE CURRENT (RC (mArms) /100KHz,105℃)/ MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) WV 160 200 250 SPEC ψDxL μF RC Z ψDxL RC Z ψDxL RC Z 10x20 300 3.5 10 22 10x20 415 1.52 10x20 440 1.50 13x20 480 2.3 33 10x20 565 1.30 13x20 590 0.91 13x25 630 1.7 47 13x20 725 0.91 13x20 780 0.91 13x25 630 1.7 68 13x25 970 0.63 13x25 950 0.63 16x26 1000 0.78 100 16x26 1280 0.27 16x26 1280 0.27 16x32 1400 0.63 220 16x32 1300 0.22 18x32 1700 0.22 18x40 1485 0.35 330 18x36 1700 0.22 350 WV 400 450 SPEC μF ψDxL ψDxL RC Z 3.3 10x12.5 120 8.5 4.7 10x12.5 165 6.5 RC Z ψDxL RC Z 10 10x20 100 3.0 10x20 180 2.9 13x20 315 2.5 22 13x20 270 2.1 13x25 300 1.35 16x26 570 1.7 33 13x25 600 1.0 16x26 600 0.95 16x32 620 1.1 47 16x26 700 0.75 16x32 700 0.75 18x32 900 0.93 100 18x32 1170 0.40 18x36 1250 0.34 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 38 Sharma Electrolytic Capacitors LU Series ■ Features • Lifetime:105℃, 1000∼5000hrs • Long life • Low Impedance ■ • • • • • • Specifications Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Converter/Inverter Adapter SMPS Items Characteristics ±20% (M) (120Hz,20℃) 6.3~100VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 10 13 16 20 25 32 35 44 50 63 63 79 100 125 I≦0.01CV or3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 WV tanδ 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 0.09 100 0.08 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 Z (120Hz) Low Temperature Stability Impedance Ratio (Max) 10 16 25 35 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 2 2 2 2 2 3 3 3 3 3 After applying rated voltage with max ripple current for 1000~5000 hours at 105℃,the capacitor shall meet the following requirement. 50 63 100 2 3 2 3 2 3 Case (ψ) Life time (hrs) Capacitance Change Within±25% of the initial value L=7 1000 ψD≦6.3 2000 Not more than 200% of the specified Dissipation Factor ψD = 8 3000 value ψD = 10 4000 ψD≧13 Leakage Current Not more than the specified value 5000 After placed at 105℃without voltage applied for 1000 hours (500 hours for L=7), the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current 4 5 6.3 8 10 13 16 18 P 1.5 2.0 2.5 3.5 5.0 5.0 7.5 7.5 ψd 0.45 0.5 0.5 0.6 [0.5] 0.6 0.6 (0.8) 0.8 0.8 a 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 [ ]:L=7 Frequency coefficient Freq. (Hz) Cap (μF) 5.6~390 470~1000 1200~6800 ψD ( ) : L≧30 50 120 1K 10K 100K 0.60 0.65 0.75 0.70 0.75 0.80 0.85 0.90 0.95 0.95 0.98 1.00 1.00 1.00 1.00 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦65 2.0 85 1.5 SECI Engineers & Buyers' Guide 105 1.00 Fax: (949)642-7327 Page 39 Sharma Electrolytic Capacitors Case Size &Max Ripple Current / Impedance CASE SIZE (ψ DxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 100KHz,105℃)/ MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) 6.3 WV SPEC μF ψDxL RC 10 Z ψDxL RC 16 Z ψDxL RC 25 Z ψDxL RC 35 Z 10 15 18 ψDxL RC Z 4 x7 130 0.96 4 x7 130 0.94 5 x7 190 0.57 4 x7 130 0.92 5 x7 170 0.69 5 x7 210 0.47 27 4 x7 130 0.89 5 x7 190 0.61 5 x7 210 0.46 5 x11 230 0.37 33 5 x7 160 0.75 5 x7 210 0.45 5 x11 220 0.42 5 x11 250 0.30 6.3 x7 6.3x11 8 x7 6.3x11 8 x7 300 380 350 410 380 0.25 0.15 0.19 0.13 0.16 8 x11 510 0.12 8 x11 620 0.105 39 4 x7 130 0.85 5 x7 175 0.64 5 x11 220 0.43 5 x11 230 0.36 47 5 x7 175 0.70 5 x7 190 0.53 5 x11 230 0.36 5 x11 250 0.30 56 5 x7 190 0. 56 5 x7 210 0.44 5 x11 250 0.30 6.3 x7 300 0.24 68 5 x7 210 0.43 5 x11 210 0.44 6.3 x7 300 0.24 100 5x11 6.3x7 5 x11 6.3x7 5x11 6.3x7 200 240 220 270 250 300 0.43 0.35 0.38 0.29 0.30 0.23 5 x11 250 0.30 0.23 0.16 0.18 0.13 0.15 0.19 0.22 0.13 0.15 300 370 350 410 380 340 310 410 380 6.3 x7 6.3x11 8x7 6.3x11 8x7 6.3x11 8x7 6.3x11 8x7 8 x11 560 0.12 8 x11 680 0.088 8 x7 350 0.18 8 x11 510 0.12 8 x11 630 0.105 8 x11 760 0.072 180 8 x7 340 0.18 8 x7 380 0.15 8 x11 560 0.11 8 x11 690 0.088 220 8 x7 380 0.15 6.3 x11 410 0.13 8 x11 620 0.10 8 x11 760 910 930 1000 1030 0.068 0.065 0.056 0.053 270 6.3 x11 370 0.16 8 x11 580 0.12 8 x11 690 0.088 1250 0.041 330 6.3 x11 410 0.13 8 x11 640 0.10 8 x11 760 1430 0.038 470 8 x11 680 0.086 8 x11 760 0.072 1820 0.026 560 8 x11 760 0.072 8x16 680 8 x14 900 820 8 x16 1000 1000 10x12.5 1030 910 940 1000 1030 1130 1300 1250 1430 0.068 0.064 0.056 0.053 0.050 0.046 0.041 0.038 1200 1250 1430 1820 1820 1500 8 x20 10x16 10x20 10 x12.5 8x16 0.062 10 x12.5 8 x20 0.056 10x16 8 x20 0.053 10x16 0.041 10x20 0.038 0.026 10x25 8x16 10 x12.5 8 x20 10x16 8 x20 10x16 1800 10x25 1940 0.025 2200 10x25 2150 2700 13x20 3300 120 150 1000 1030 1140 1300 1250 1430 8 x16 10 x12.5 8 x16 0.072 10 x12.5 0.056 8 x20 0.053 10x16 0.049 10x20 0.046 0.041 10x20 0.038 900 930 1000 1030 1250 1430 8 x16 10 x12.5 8 x16 0.072 10 x12.5 0.068 8 x20 0.065 0.056 10x16 0.053 0.041 10x20 0.038 1650 0.032 10x25 2150 0.023 1820 0.026 13x20 2360 0.023 10x20 1650 0.032 10x25 2150 0.023 13x25 2510 0.020 10x20 1820 0.026 13x20 2360 0.021 13x25 2770 0.018 0.026 10x25 2150 0.023 13x25 2510 0.020 2150 0.023 13x20 2360 0.021 0.022 13x25 2510 0.020 16x25 3460 0.016 0.023 13x20 2360 0.021 13x25 2770 0.018 0.018 0.016 0.018 0.015 0.016 0.018 0.015 2230 2770 3290 3140 3400 3290 3140 3400 13x20 13x25 13x30 16x20 13x36 13x30 16x20 13x36 2230 0.022 13x25 2510 0.020 0.016 0.021 3900 13x25 2770 0.018 0.016 3290 3400 3140 0.016 0.015 0.018 0.018 0.016 0.018 0.015 3460 13x30 13x36 16 x20 16x25 2770 3290 3140 3400 16x25 4700 13x25 13x30 16x20 13x36 0.016 0.018 0.015 3460 2360 3290 3140 3400 16x25 13x20 13x30 16x20 13x36 16x25 3460 0.016 3460 0.016 5600 6800 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 40 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / Impedance CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 100KHz,105℃)/ MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) 50 WV SPEC μF ψDxL RC 63 Z ψDxL RC 100 Z ψDxL RC Z 5.6 4x7 130 1.0 6.8 5x7 170 0.74 5x11 125 1.4 10 5 x7 210 0.50 6.3x11 170 0.95 0.38 0.48 0.26 0.34 27 6.3 x7 5 x11 6.3 x7 5 x11 8 x7 220 215 300 240 340 33 8 x7 39 15 5 x11 170 0.88 6.3 x 11 210 0.57 6.3 x11 220 0.65 8 x11 330 0.44 0.21 6.3 x11 240 0.43 8 x11 360 0.36 380 0.17 6.3 x11 270 0.35 8 x14 375 0.30 6.3 x11 330 0.16 8 x11 385 0.31 8 x16 450 0.25 47 6.3 x11 360 0.15 8 x11 420 0.26 10 x12.5 450 0.24 56 6.3 x11 390 0.14 8 x11 500 0.22 8 x20 570 0.19 610 625 670 690 0.19 0.18 0.16 0.15 10 x16 580 0.18 10 x20 13 x16 750 740 0.13 0.13 0.12 0.12 0.11 0.096 0.098 0.080 0.082 10 x25 880 0.12 8 x20 10 x16 10 x20 13 x16 10 x20 13 x16 800 820 950 1010 1040 1100 1140 13 x20 1050 0.094 13 x25 1100 0.085 13 x25 1200 0.071 13x30 16x20 13x36 16x25 18x20 13x40 16x32 18x25 16x36 18x32 16x40 18x36 1410 1300 1560 1600 1470 1700 1750 1620 1890 1780 2080 2060 0.063 0.071 0.052 0.053 0.069 0.046 0.041 0.049 0.033 0.039 0.030 0.031 18x40 2570 0.028 22 68 8 x11 600 82 8 x11 660 100 8 x11 730 8 x16 10 x12.5 8 x16 0.090 10 x12.5 0.074 10 x15 120 8 x16 950 0.065 150 10 x12.5 980 0.061 180 8x20 1190 0.046 220 10 x16 1370 0.042 10 x25 1300 0.073 270 10 x20 1580 0.030 13 x20 1500 0.060 330 10x25 1870 0.028 390 13x20 1870 0.028 470 13x20 2050 0.027 560 13 x25 2410 0.023 680 13x30 2860 0.021 820 13x36 16x20 2960 2730 0.019 0.023 1000 16x32 3350 0.021 13 x25 13x30 16x20 13x30 16x20 13x36 16x25 13x40 18x20 16x32 18x25 16x36 18x32 16x40 18x36 18x40 1850 2050 1810 2250 1990 2450 2550 2780 2450 2810 2780 2840 3270 3340 3310 3420 0.043 0.047 0.054 0.045 0.045 0.035 0.032 0.029 0.038 0.026 0.031 0.021 0.025 0.019 0.020 0.018 0.11 1200 1500 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 41 Sharma Electrolytic Capacitors LW Series ■ Features • Lifetime:105℃,2000hrs • Ultra-low ESR Specifications ■ • • • • • • Items Characteristics ±20% (M) (120Hz,20℃) 6.3~16VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) Low Temperature Stability Impedance Ratio (Max) 6.3 8 10 13 16 20 I≦0.01CV (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Converter/Inverter Adapter SMPS WV tanδ 6.3 0.22 10 0.19 16 0.16 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 Z (120Hz) 10 16 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 2 2 2 3 3 3 After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±25% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not More than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 8 10 P 3.5 5.0 ψd 0.6 0.6 a 1.0 1.0 Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient 50 0.45 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 120 0.55 ≦50 1.90 1K 0.75 70 1.75 SECI Engineers & Buyers' Guide 10K 0.85 85 1.40 100K 1.00 105 1.00 Fax: (949)642-7327 Page 42 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / ESR CASE SIZE (ψDxL)/MAX PERMISSIBLERIPPLE CURRENT(RC (mArms) / 100KHz,105℃)/ MAX EQUIVALENT SERIES RESISTANCE (ESR(mΩ) / 100KHz,20℃) WV SPEC μF 6.3 ψDxL RC 10 ESR ψDxL RC 16 ESR 470 680 820 1000 1200 8x11 1140 36 ESR 8x11 1140 36 8x16 1490 28 10x12.5 1540 26 1140 36 8x16 1360 28 8x16 1490 28 8x20 1870 21 10x12.5 1390 26 10x12.5 1540 26 10x16 2000 19 10x20 2550 13 10x25 2800 12 1490 28 8x20 1610 21 8x20 1870 21 10x16 1720 19 10x16 2000 19 8x20 1870 21 10x20 2550 13 10x16 2000 19 2200 10x20 2550 13 10x25 2800 12 3300 10x25 2800 12 1800 RC 8x11 8x16 1500 ψDxL Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 43 Sharma Electrolytic Capacitors RN Series ■ Features • Lifetime:85℃,1000hrs • Non-polarized/Polarity reversing ■ • • • Recommended Applications Small crossover network Reversed polarity circuit Coupling Specifications Items Characteristics ±20% (M) (120Hz,20℃) 6.3~250 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 10 13 16 20 25 32 35 44 50 63 63 79 80 100 100 125 160 200 200 250 250 300 I≦0.03CV+4μA (After voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 WV tanδ Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life 6.3 0.24 10 0.20 16 0.17 25 0.15 35 0.15 50 0.15 63 0.10 80 0.10 100 0.10 160 0.20 200 0.20 250 0.20 160 200 250 4 3 2 2 2 2 2 2 2 6 8 6 4 4 3 3 3 3 3 12 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 6 12 6 12 16 18 5.0 7.5 0.6 0.6 0.8 (0.8) 1.0 2.0 2.0 7.5 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV 6.3 Z (120Hz) 10 16 25 35 50 63 80 100 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD 5 6.3 8 10 P 2.0 2.5 3.5 5.0 ψd 0.5 0.5 0.6 a 1.0 1.0 1.0 13 ( ) : L≧30 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 6.3~16 25~35 50~100 160~250 50 120 1K 10K 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00 1.10 1.50 1.60 1.50 1.20 1.70 1.90 1.60 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 44 0.8 2.0 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) 6.3 WV SPEC 16 5 1 5x11 2.2 3.3 RC 4.7 10 22 ψDxL 63 5x11 RC ψDxL 50 0.47 RC ψDxL 35 RC RC ψDxL 25 ψDxL μF ψDxL 10 RC ψDxL RC 10 5x11 10 5x11 20 5x11 20 5x11 30 5x11 30 5x11 30 5x11 30 6.3x11 35 5x11 40 5x11 40 5x11 40 6.3x11 45 6.3x11 55 5x11 50 5x11 55 6.3x11 65 6.3x11 70 8x11 80 8x11 90 33 5x11 60 5x11 65 5x11 70 6.3x11 80 8x11 100 8x11 105 10x12.5 135 47 5x11 70 5x11 75 6.3x11 95 6.3x11 95 8x11 120 8x14 140 10x17 180 100 6.3x11 115 6.3x11 125 8x11 160 8x11 160 10x17 230 10x20 265 13x20 320 220 8x11 205 8x11 215 10x12.5 275 10x17 305 13x20 410 13x25 480 16x26 575 330 8x11 265 10x15 345 10x17 375 13x20 450 13x20 505 16x26 650 16x32 750 470 10x12.5 370 10x17 410 10x20 485 13x20 540 13x25 655 16x32 835 18x36 965 1000 10x20 650 13x20 720 13x25 855 16x26 950 16x32 1140 2200 13x25 1160 16x26 1280 16x32 1510 18x36 1620 3300 16x26 1570 16x32 1690 18x36 1980 4700 16x32 2020 18x36 2160 6800 18x36 2600 80 WV SPEC 160 200 ψDxL RC ψDxL RC 0.47 5x11 5 6.3x11 5 1 5x11 10 6.3x11 μF ψDxL 100 RC 250 ψDxL RC ψDxL RC 15 6.3x11 15 8x11 15 2.2 5x11 30 6.3x11 25 8x11 20 8x11 20 10x12.5 25 3.3 6.3x11 35 6.3x11 35 10x12.5 30 10x12.5 30 10x12.5 30 4.7 6.3x11 40 6.3x11 40 10x12.5 35 10x15 40 10x17 40 10 8x11 65 8x11 70 10x17 55 13x20 70 13x20 70 22 10x15 105 10x17 135 13x25 105 13x25 120 16x26 135 33 10x17 160 13x20 220 16x26 165 16x26 165 16x32 180 47 10x20 215 13x20 240 16x26 200 16x32 220 16x36 230 100 13x25 385 16x26 425 18x36 360 220 16x32 690 18x36 720 330 18x36 860 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 45 Sharma Electrolytic Capacitors RX Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for RN • Non-polarized/Polarity reversing ■ • • • Recommended Applications Small crossover network Reversed polarity circuit Coupling Items Characteristics ±20% (M) (120Hz,20℃) 6.3~250 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 10 13 16 20 25 32 35 44 50 63 63 79 80 100 100 125 160 200 200 250 250 300 I≦0.03CV+4μA (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 6.3 8 WV tanδ Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life 6.3 0.24 10 0.20 16 0.17 25 0.15 35 0.15 50 0.15 63 0.10 80 0.10 100 0.10 160 0.20 200 0.20 When nominal capacitance is over 1000μF, tanδ shall be added 0.02 to the listed value with increase of every 1000μF. WV Z (120Hz) 6.3 10 16 25 35 50 63 80 100 160 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 4 3 2 2 2 2 2 2 2 6 8 6 4 4 3 3 3 3 3 12 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 250 0.20 200 250 6 12 6 12 16 7.5 18 7.5 0.8 0.8 2.0 2.0 Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD P 5 2.0 6.3 2.5 8 3.5 ψd 0.5 0.5 0.6 a 1.0 1.0 1.0 10 5.0 13 5.0 0.6 0.6 (0.8) 1.0 2.0 ( ) ; L≧30 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 6.3~16 25~35 50~100 160~250 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 0.80 1.00 1.00 1.00 1.00 1.10 1.50 1.60 1.50 1.20 1.70 1.90 1.60 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 46 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105℃) WV 6.3 SPEC 16 5 RC ψDxL 63 5x11 RC ψDxL 50 0.47 RC ψDxL 35 RC RC ψDxL 25 ψDxL μF ψDxL 10 RC ψDxL RC 1 5x11 10 5x11 10 2.2 5x11 20 5x11 20 3.3 5x11 25 5x11 25 4.7 10 22 5x11 25 5x11 25 6.3x11 30 5x11 35 5x11 35 5x11 35 6.3x11 40 6.3x11 50 5x11 45 5x11 50 6.3x11 55 6.3x11 60 8x11 70 8x11 80 33 5x11 55 5x11 55 5x11 60 6.3x11 70 8x11 85 8x11 90 10x12.5 115 47 5x11 60 5x11 65 6.3x11 85 6.3x11 85 8x11 105 8x14 120 10x17 155 100 6.3x11 100 6.3x11 110 8x11 140 8x11 140 10x17 195 10x20 225 13x20 275 220 8x11 175 8x11 185 10x12.5 235 10x17 260 13x20 350 13x25 410 16x26 490 330 8x11 225 10x15 295 10x17 320 13x20 385 13x20 430 16x26 555 16x32 640 470 10x12.5 315 10x17 350 10x20 415 13x20 460 13x25 560 16x32 710 18x36 820 1000 10x20 555 13x20 615 13x25 730 16x26 810 16x32 970 2200 13x25 990 16x26 1090 16x32 1285 18x36 1380 3300 16x26 1335 16x32 1440 18x36 1685 4700 16x32 1720 18x36 1840 6800 18x36 2210 80 WV SPEC 160 200 ψDxL RC ψDxL RC 0.47 5x11 5 6.3x11 5 1 5x11 10 6.3x11 μF ψDxL 100 RC 250 ψDxL RC ψDxL RC 15 6.3x11 15 8x11 15 2.2 5x11 25 6.3x11 20 8x11 20 8x11 20 10x12.5 20 3.3 6.3x11 30 6.3x11 30 10x12.5 25 10x12.5 25 10x12.5 25 4.7 6.3x11 35 6.3x11 35 10x12.5 30 10x15 35 10x17 35 10 8x11 55 8x11 60 10x17 50 13x20 60 13x20 60 22 10x15 90 10x17 115 13x25 100 13x25 105 16x26 115 33 10x17 140 13x20 190 16x26 140 16x26 140 16x32 155 47 10x20 185 13x20 205 16x26 170 16x32 190 16x36 195 100 13x25 330 16x26 365 18x36 310 220 16x32 590 18x36 615 330 18x36 735 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 47 Sharma Electrolytic Capacitors SN Series Specifications ■ Features • Lifetime:85℃,1000hrs • Non-polarized/Polarity reversing • Low profile/Miniature • 7mm height ■ Recommended Applications • Reversed polarity circuit • Coupling Items Characteristics ±20% (M) (120Hz,20℃) 4~63 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV WV tanδ 4 0.35 WV Low Temperature Stability Impedance Ratio (Max) 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I≦0.06CV+10μA (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 Z (120Hz) 6.3 0.24 10 0.20 4 6.3 16 0.16 10 25 0.16 16 35 0.14 25 50 0.12 35 63 0.10 50 63 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life Shelf Life 6 4 3 2 2 2 2 12 8 6 4 4 3 3 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD P ψd a 4 1.5 0.45 1.0 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~10 16~25 35~63 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.20 1.50 1.20 1.30 1.70 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 48 2 3 Sharma Electrolytic Capacitors CASE SIZE (ψDxL(mm)) & MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) 4 SPEC μF ψDxL 6.3 RC ψDxL 10 RC ψDxL 16 RC ψDxL 25 RC ψDxL 35 RC 2.2 3.3 4.7 10 22 15 15 5x7 20 20 5x7 20 5x7 25 6.3x7 40 4x7 25 5x7 30 6.3x7 35 35 5x7 40 6.3x7 45 6.3x7 50 6.3x7 65 5x7 35 5x7 40 6.3x7 50 6.3x7 60 47 5x7 40 6.3x7 50 6.3x7 60 6.3x7 70 100 6.3x7 60 SPEC 4x7 4x7 33 63 ψDxL RC ψDxL RC 0.1 4x7 1 4x7 1 0.22 4x7 2 4x7 2 0.33 4x7 3 4x7 3 0.47 4x7 5 4x7 5 1 4x7 10 4x7 15 2.2 4x7 20 5x7 25 3.3 5x7 25 6.3x7 30 4.7 6.3x7 30 6.3x7 35 μF RC 4x7 5x7 50 ψDxL Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 49 Sharma Electrolytic Capacitors SP Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for SN • Non-polarized/Polarity reversing • Low profile/Miniature • 7mm height ■ Recommended Applications • Reversed polarity circuit • Coupling Items Characteristics ±20% (M) (120Hz,20℃) 4~63 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 6.3 8 10 13 16 20 25 32 35 44 50 63 63 79 I≦0.06CV+10μA (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 WV tanδ 4 0.35 WV Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life Z (120Hz) 6.3 0.24 4 10 0.20 6.3 16 0.16 10 25 0.16 16 35 0.14 25 35 50 0.12 63 0.10 50 63 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 6 4 3 2 2 2 2 12 8 6 4 4 3 3 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. 2 3 Refer to JIS C-5101 Applicable standards Dimensions (mm) ψD P ψd a 4 1.5 0.45 1.0 5 2.0 0.5 1.0 6.3 2.5 0.5 1.0 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 4~10 16~25 35~63 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 0.80 0.80 0.80 1.00 1.00 1.00 1.10 1.20 1.50 1.20 1.30 1.70 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 50 Sharma Electrolytic Capacitors Case Size &Max Ripple Current CASE SIZE (ψDxL(mm)) & MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,105℃) 4 WV SPEC μF ψDxL 6.3 RC ψDxL 10 RC ψDxL 16 RC ψDxL 25 RC ψDxL 35 RC 2.2 3.3 4.7 10 22 15 5x7 15 5x7 20 5x7 20 6.3x7 35 4x7 20 5x7 25 6.3x7 30 30 5x7 35 6.3x7 40 6.3x7 45 6.3x7 55 30 5x7 35 6.3x7 45 6.3x7 50 47 5x7 35 6.3x7 45 6.3x7 55 6.3x7 60 100 6.3x7 55 SPEC 15 20 5x7 63 ψDxL RC ψDxL RC 0.1 4x7 1 4x7 1 0.22 4x7 2 4x7 2 0.33 4x7 3 4x7 3 0.47 4x7 5 4x7 5 1 4x7 10 4x7 15 2.2 4x7 15 5x7 20 3.3 5x7 20 6.3x7 25 4.7 6.3x7 25 6.3x7 30 μF 4x7 4x7 5x7 50 RC 4x7 33 WV ψDxL Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 51 Sharma Electrolytic Capacitors RB Series Specifications ■ Features • Lifetime:85℃,1000hrs • Non-polarized/Polarity reversing • High ripple current ■ Recommended Applications • Crossover/Speaker network • Reversed polarity circuit Items Characteristics ±10% (K) (1KHz,20℃) 25~100 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 35 44 50 63 63 79 80 100 100 125 I≦0.03CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (1KHz ,20℃) 25 32 WV 25 35 50 63 80 100 tanδ 0.17 0.15 0.15 0.12 0.10 0.10 Load Life Shelf Life After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C-5101 Applicable standards Dimensions (mm) ψD P 5 2.0 6.3 2.5 8 3.5 ψd 0.5 0.5 0.6 a 1.0 1.0 1.0 10 5.0 13 5.0 0.6 0.6 (0.8) 1.0 2.0 16 7.5 18 7.5 0.8 0.8 2.0 2.0 ( ) : L≧30 Multiplier for Ripple Current Frequency coefficient Freq. (Hz) WV (VDC) 25~35 50~100 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 50 120 1K 10K 100K 0.80 0.80 0.90 0.90 1.00 1.00 1.60 1.70 1.80 2.00 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 52 Sharma Electrolytic Capacitors Case Size / Max Ripple Current CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 1KHz,85℃) WV SPEC μF 1 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 15 22 33 47 56 68 82 100 25 ψDxL 6.3x11 8x11 8x11 10x12.5 10x12.5 10x15 10x15 10x17 35 RC 200 280 340 480 520 635 700 820 Tel: (949)642-7324 ψDxL 6.3x11 8x11 10x12.5 10x12.5 10x15 10x17 10x17 10x20 13x20 50 RC 170 240 340 420 555 640 705 830 1065 ψDxL 6.3x11 8x11 8x11 8x11 10x12.5 10x12.5 10x17 10x20 13x20 13x20 13x20 13x25 63 RC 130 170 185 205 295 360 515 660 835 920 1010 1230 ψDxL 6.3x11 8x11 8x11 8x11 8x11 10x12.5 10x12.5 10x15 10x20 13x20 13x20 13x25 13x25 16x36 80 RC 105 145 160 180 195 255 310 420 580 805 880 1070 1175 1480 SECI Engineers & Buyers' Guide ψDxL 6.3x11 8x11 8x11 10x12.5 10x12.5 10x12.5 10x12.5 10x17 10x20 13x20 13x25 13x25 16x26 16x26 16x36 100 RC ψDxL RC 95 130 155 200 220 245 270 390 505 720 945 1030 1300 1430 1820 6.3x11 6.3x11 8x11 8x11 10x12.5 10x12.5 10x12.5 10x15 10x15 10x20 13x20 13x25 16x26 16x26 16x32 16x36 18x36 70 85 110 140 200 215 235 290 320 445 625 845 1155 1260 1520 1765 2080 Fax: (949)642-7327 Page 53 Sharma Electrolytic Capacitors BP Series ■ Features • Lifetime:85℃,1000hrs • Bi-polarized/Polarity reversing • High ripple current ■ Recommended Applications • TV/Monitor • Horizontal deflection correction Specifications Items Characteristics ±10% (K) (120Hz,20℃) 25~50 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 25 32 50 63 I≦100μA (After rated voltage applied for 2 minutes) I= Leakage Current (μA) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 35 44 WV tanδ Load Life Shelf Life 25 0.05 35 0.05 50 0.05 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within±15% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C-5101 Applicable standards Dimensions (mm) ψD 10 13 16 18 22 25 P 5.0 7.5 7.5 10.0 12.5 ψd 0.6 5.0 0.6 (0.8) 2.0 0.8 0.8 0.8 0.8 2.0 2.0 2.0 2.0 a 1.0 ( ) : L≧30 Multiplier for Ripple Current Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.36 70 1.25 SECI Engineers & Buyers' Guide 85 1.00 Fax: (949)642-7327 Page 54 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(A p-p) / Sawtooth wave 15.75KHz,85℃)/ MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) 25 WV SPEC 50 ψDxL RC ESR 1.2 10x20 1.8 55.3 1.5 10x20 2.1 μF ψDxL 35 RC ESR ψDxL RC ESR 10x20 1.6 66.4 13x20 2.1 55.3 44.3 13x20 2.4 44.3 1 1.8 10x20 2.2 36.9 13x20 2.6 36.9 13x20 2.6 36.9 2.2 13x20 2.9 30.2 13x20 2.9 30.2 13x20 2.9 30.2 2.7 13x20 3.2 24.6 13x20 3.2 24.6 13x25 3.5 24.6 3.3 13x20 3.6 20.1 13x25 3.9 20.1 16x26 4.5 20.1 3.9 13x20 3.9 17.0 13x25 4.2 17.0 16x26 4.8 17.0 4.7 13x25 4.7 14.1 16x26 5.3 14.1 16x26 5.3 14.1 5.6 16x26 5.9 11.9 16x26 5.9 11.9 16x32 6.4 11.9 6.8 16x26 6.5 9.76 16x32 7 9.76 16x36 8 9.76 8.2 16x26 7.1 8.09 16x32 7.7 8.09 18x36 8.7 8.10 10 16x32 8.6 6.64 16x36 9 6.64 18x40 10 6.64 12 16x36 10 5.53 18x36 10 5.53 22x40 11 5.53 15 18x36 11 4.43 18x40 12 4.43 22x40 13 4.43 18 18x40 13 3.69 22x40 14 3.69 25x40 16 3.69 22 22x40 15 3.02 22x40 16 3.02 25x40 18 3.02 27 22x40 18 2.46 25x40 19 2.46 33 25x40 22 2.01 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 55 Sharma Electrolytic Capacitors BX Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for BP • Bi-polarized/Polarity reversing ■ Recommend ed Applications • TV/monitor • Horizontal deflection correction Items Characteristics ±10% (K) (120Hz,20℃) 25~50 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 25 32 50 63 I≦100μA (After rated voltage applied for 2 minutes) I= Leakage Current (μA) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 35 44 WV tanδ Load Life Shelf Life 25 0.05 35 0.05 50 0.05 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. (The polarity shall be reversed every 250 hours) Capacitance Change Within±15% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C-5101 Applicable standards Dimensions (mm) ψD 10 13 16 18 22 25 P 5.0 7.5 7.5 10.0 12.5 ψd 0.6 0.8 0.8 0.8 0.8 a 1.0 5.0 0.6 (0.8) 2.0 2.0 2.0 2.0 2.0 ( ) : L≧30 Multiplier for Ripple Current Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Page 56 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(A p-p ) / Sawtooth wave 15.75KHz,105℃)/ MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) 25 WV SPEC μF ψDxL RC 35 ESR ψDxL RC 50 ESR 1 1.2 1.5 ψDxL RC ESR 10x20 1.4 66.4 1.8 55.3 10x20 1.5 55.3 13x20 10x20 1.8 44.3 13x20 2 44.3 1.8 10x20 1.9 36.9 13x20 2.2 36.9 13x20 2.2 36.9 2.2 13x20 2.5 30.2 13x20 2.5 30.2 13x20 2.5 30.2 2.7 13x20 2.7 24.6 13x20 2.7 24.6 13x25 3 24.6 3.3 13x20 3.1 20.1 13x25 3.3 20.1 16x26 3.8 20.1 3.9 13x20 3.3 17.0 13x25 3.6 17.0 16x26 4 17.0 4.7 13x25 4 14.1 16x26 4.5 14.1 16x26 4.5 14.1 5.6 16x26 5 11.9 16x26 5 11.9 16x32 5.4 11.9 6.8 16x26 5.5 9.76 16x32 6 9.76 16x36 6.8 9.76 8.2 16x26 6 8.09 16x32 6.5 8.09 18x36 7.4 8.10 10 16x32 7.3 6.64 16x36 7.6 6.64 18x40 8.5 6.64 12 16x36 8.5 5.53 18x36 8.5 5.53 22x40 9.3 5.53 15 18x36 9.3 4.43 18x40 10 4.43 22x40 11 4.43 18 18x40 11 3.69 22x40 12 3.69 25x40 14 3.69 22 22x40 13 3.02 22x40 14 3.02 25x40 15 3.02 27 22x40 15 2.46 25x40 16 2.46 33 25x40 18 2.01 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 57 Sharma Electrolytic Capacitors TW Series ■ • • • • Features Lifetime:85℃,2000hrs Snap-in terminal Large ripple current High reliability ■ • • • • • • Specifications Items Characteristics ±20% (M) (120Hz,20℃) 6.3~100 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Smoothing circuit AC Adapter SMPS WV SV 6.3 10 8 13 16 20 25 32 35 44 50 63 63 100 160 79 125 200 160~450 VDC -25 ~ +85℃ 200 250 250 300 350 400 400 450 450 500 Leakage Current (Max) I≦0.02CV or 3mA whichever is smaller (After rated voltage applied for 5 minutes) I= Leakage Current (µA) C= Nominal Capacitance (µF) V= Rated Voltage (V) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Dissipation Factor(tanδ)shall not exceed the values showed in the table of standard rating After applying rated voltage for 2000 hours at 85℃, the capacitor shall meet the following requirement. Within±20% of the initial value Capacitance Change Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 500 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Satisfied JIS C-5141 Other Dimensions (mm) Multiplier for Ripple Current Frequency coefficient Freq. (Hz) 50 Coefficient 0.80 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 60 0.85 40 2.32 120 1.00 45 2.21 50 2.10 400 1.14 55 1.98 1K 1.23 60 1.85 65 1.72 SECI Engineers & Buyers' Guide 2.4K 1.30 70 1.57 5K 1.36 75 1.40 ~10K 1.40 80 1.22 85 1.00 Fax: (949)642-7327 Page 58 Sharma Electrolytic Capacitors Case Size&Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) & MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) & MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) & MAX EQUIVALENT SERIES RESISTANCE (ESR(Ω) / 120Hz,20℃) 10 WV SPEC tanδ ψDxL µF 16 RC ESR 8200 ψDxL 22x25 10000 22x30 tanδ RC ESR 0.4 2.45 0.065 0.4 2.6 0.053 0.4 2.9 0.044 0.4 3.3 0.035 12000 22x25 0.4 2.45 0.044 22x35 25x25 15000 22x30 0.4 2.8 0.035 22x40 25x30 30x25 18000 22x35 25x25 0.4 3.15 0.029 22x45 25x35 30x30 0.4 3.7 0.029 22000 22x40 25x30 30x25 0.4 3.5 0.024 22x50 25x45 30x30 35x25 0.4 4.15 0.024 27000 22x45 25x35 30x30 0.4 4 0.020 25x45 30x35 35x30 0.4 4.65 0.020 33000 22x50 25x40 30x30 35x25 0.4 4.45 0.016 30x40 35x35 0.4 5.25 0.016 39000 25x45 30x35 35x30 0.4 4.9 0.014 30x45 35x35 0.4 5.8 0.014 47000 25x50 30x40 35x30 0.4 5.5 0.011 35x40 0.4 6.45 0.011 56000 30x45 35x35 0.4 6.05 0.009 tanδ RC ESR 0.35 2.1 0.119 WV 25 SPEC tanδ ψDxL µF 35 RC ESR 3900 ψDxL 22x25 4700 22x30 25x25 0.35 2.3 0.099 0.35 2.2 0.083 22x35 25x35 30x25 35x25 0.35 2.6 0.083 25x25 0.35 2.45 0.068 22x40 25x35 30x30 35x25 0.35 2.9 0.068 22x35 25x30 0.35 2.75 0.057 22x45 25x35 30x30 35x25 0.35 3.2 0.057 10000 22x40 25x30 30x25 0.35 3.1 0.046 22x50 25x40 30x30 35x25 0.35 3.6 0.046 12000 22x45 25x45 5600 22x25 6800 22x30 8200 25x35 30x30 35x25 0.35 3.4 0.039 30x35 35x30 0.35 4 0.039 15000 25x40 30x35 35x30 0.35 3.9 0.031 30x40 35x35 0.35 4.6 0.031 18000 25x45 30x40 35x30 0.35 4.3 0.026 30x45 35x40 0.35 5.1 0.026 22000 30x45 35x35 0.35 4.85 0.021 35x45 0.35 5.7 0.021 27000 30x50 35x40 0.35 5.45 0.017 35x50 0.35 6.45 0.017 33000 35x45 0.35 6.15 0.014 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 59 Sharma Electrolytic Capacitors Case Size&Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) & MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) & MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) & MAX EQUIVALENT SERIES RESISTANCE (ESR(Ω) / 120Hz,20℃) 50 WV SPEC ψDxL µF 63 tanδ RC ESR 1800 ψDxL 22x25 tanδ RC ESR 0.25 1.8 0.184 2200 22x25 0.3 1.8 0.180 22x30 25x25 0.25 2 0.151 2700 22x30 0.3 1.95 0.147 22x35 25x30 0.25 2.3 0.123 3300 22x35 25x25 0.3 2.2 0.120 22x40 25x30 30x25 0.25 2.55 0.101 3900 22x40 25x30 0.3 2.4 0.102 22x45 25x35 30x30 0.25 2.8 0.085 4700 22x45 25x35 35x25 0.3 2.7 0.085 22x50 25x40 30x30 35x25 0.25 3.15 0.071 5600 25x35 30x30 35x25 0.3 3 0.071 25x45 30x35 35x30 0.25 3.5 0.059 6800 25x40 30x35 35x30 0.3 3.35 0.059 25x50 30x40 35x30 0.25 3.9 0.049 8200 25x50 30x40 35x30 0.3 3.7 0.049 30x45 35x35 0.25 4.35 0.040 10000 30x45 35x35 0.3 4.2 0.040 30x50 35x40 0.25 4.9 0.033 12000 30x50 35x40 0.3 4.65 0.033 30x50 0.25 5.45 0.028 15000 35x45 0.3 5.3 0.027 18000 35x50 0.3 5.9 0.022 tanδ RC ESR 0.2 1.7 0.324 80 WV SPEC tanδ ψDxL µF 100 RC ESR ψDxL 820 22x25 1000 22x30 25x25 0.2 1.95 0.265 0.2 2.15 0.221 1200 22x25 0.2 1.7 0.221 22x35 25x30 1500 22x30 1800 22x35 25x25 0.2 1.95 0.177 22x40 25x30 30x25 0.2 2.45 0.177 25x30 0.2 2.15 0.147 22x45 25x35 30x30 0.2 2.75 0.147 2200 22x40 25x30 30x25 0.2 2.45 0.121 22x50 25x40 30x30 35x25 0.2 3.05 0.121 2700 22x45 25x35 30x30 0.2 2.75 0.098 25x45 30x35 35x30 0.2 3.45 0.098 3000 22x50 25x50 25x40 30x30 35x25 0.2 3.1 0.080 30x40 35x30 0.2 3.9 0.080 3900 25x45 30x35 35x30 0.2 3.4 0.068 30x45 35x35 0.2 4.3 0.068 4700 25x50 30x40 35x30 0.2 3.8 0.056 35x40 0.2 4.75 0.056 5600 30x45 35x35 0.2 4.2 0.047 35x50 0.2 5.3 0.047 6800 30x50 35x40 0.2 4.7 0.039 8200 35x50 0.2 5.25 0.032 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 60 Sharma Electrolytic Capacitors Case Size&Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) & MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) & MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) & MAX EQUIVALENT SERIES RESISTANCE (ESR(Ω) / 120Hz,20℃) 160 WV SPEC ψDxL µF 180 tanδ RC ESR 270 tanδ ψDxL RC ESR 22x25 0.15 1.1 0.737 330 22x25 0.15 1.15 0.603 22x30 0.15 1.25 0.603 390 22x30 0.15 1.3 0.510 22x30 25x25 0.15 1.4 0.510 470 22x35 25x25 0.15 1.5 0.423 22x35 25x30 0.15 1.6 0.423 560 22x35 25x30 0.15 1.7 0.355 22x40 25x30 30x25 0.15 1.8 0.355 680 22x40 25x35 30x25 0.15 1.95 0.293 22x45 25x35 30x30 0.15 2.05 0.292 820 22x50 25x35 30x30 0.15 2.15 0.243 22x50 25x40 30x30 35x25 0.15 2.25 0.243 1000 25x40 30x35 35x25 0.15 2.45 0.199 25x45 30x35 35x30 0.15 2.55 0.199 1200 25x50 30x40 35x30 0.15 2.75 0.166 30x40 35x35 0.15 2.85 0.166 1500 30x45 35x35 0.15 3 0.133 30x50 35x40 0.15 3.1 0.130 1800 30x50 35x40 0.15 3.5 0.111 35x45 0.15 3.6 0.111 2200 35x45 0.15 3.9 0.090 35x50 0.15 4 0.090 WV 200 tanδ RC ESR 0.15 1 1.11 SPEC tanδ ψDxL µF 250 RC ESR 180 ψDxL 22x25 220 22x25 22x30 0.15 1 0.905 22x30 22x35 0.15 1.15 0.905 270 22x30 25x25 0.15 1.15 0.737 22x30 25x25 0.15 1.3 0.737 330 22x35 25x25 22x40 0.15 1.3 0.603 22x35 25x30 22x40 0.15 1.45 0.603 390 22x35 25x30 30x25 0.15 1.45 0.510 22x40 25x35 30x25 0.15 1.6 0.510 470 22x40 25x35 30x25 22x40 0.15 1.65 0.423 22x45 25x40 30x30 35x25 0.15 1.8 0.423 560 22x45 25x40 30x30 22x40 0.15 1.85 0.355 25x40 30x35 35x30 0.15 2 0.355 680 22x50 25x40 30x35 35x30 0.15 2.1 0.293 25x50 30x40 35x30 0.15 2.3 0.293 820 25x50 30x40 35x30 0.15 2.3 0.243 30x45 35x35 0.15 2.55 0.243 1000 30x45 35x35 0.15 2.6 0.199 30x50 35x40 0.15 2.9 0.199 1200 30x50 35x40 0.15 2.9 0.166 35x45 0.15 3.25 0.166 1500 35x50 0.15 3.25 0.133 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 61 Sharma Electrolytic Capacitors Case Size&Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) & MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) & MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) & MAX EQUIVALENT SERIES RESISTANCE (ESR(Ω) / 120Hz,20℃) 315 WV SPEC tanδ ψDxL µF 350 RC ESR 82 100 22x25 120 22x30 150 22x30 25x25 180 22x35 220 tanδ RC ESR 22x25 0.15 0.7 2.43 0.15 0.8 1.99 ψDxL 0.15 0.75 1.99 22x30 0.15 0.8 1.66 22x30 25x25 0.15 0.85 1.66 0.15 1 1.33 22x35 25x25 0.15 1.05 1.33 25x30 0.15 1.1 1.11 22x40 25x35 30x25 0.15 1.15 1.11 22x40 25x30 30x25 0.15 1.25 0.905 22x45 25x35 30x30 35x25 0.15 1.3 0.905 270 22x45 25x35 30x30 35x25 0.15 1.4 0.737 25x45 30x35 35x25 0.15 1.45 0.737 330 22x50 25x40 30x35 35x25 0.15 1.6 0.603 25x50 30x40 35x30 0.15 1.65 0.603 390 25x45 30x35 35x30 0.15 1.75 0.510 30x45 35x35 0.15 1.85 0.510 470 30x40 35x35 0.15 2 0.423 30x50 35x40 0.15 2.1 0.423 560 30x45 35x40 0.15 2.2 0.355 35x45 0.15 2.3 0.355 680 35x45 0.15 2.5 0.293 35x50 0.15 2.6 0.293 820 35x50 0.15 2.8 0.243 WV 400 tanδ RC ESR 0.15 0.65 3.56 SPEC tanδ ψDxL µF 450 RC ESR 56 ψDxL 22x25 68 22x25 0.15 0.65 2.93 22x30 0.15 0.75 2.93 82 22x25 0.15 0.75 2.43 22x30 25x25 0.15 0.85 2.43 100 22x30 25x25 0.15 0.85 1.99 22x35 25x30 0.15 0.9 1.99 120 22x35 25x25 18x36 0.15 0.9 1.66 22x40 25x35 30x25 0.15 1.1 1.66 150 22x40 25x30 30x25 0.15 1.1 1.33 22x50 25x40 30x30 0.15 1.2 1.33 180 22x45 25x35 30x30 0.15 1.2 1.11 25x45 30x35 35x25 0.15 1.35 1.11 220 22x50 25x40 30x30 35x25 0.15 1.35 0.905 25x50 30x40 35x30 0.15 1.5 0.905 270 25x45 30x35 35x30 0.15 1.5 0.737 30x45 35x35 0.15 1.7 0.737 330 25x50 30x40 35x35 0.15 1.7 0.603 30x50 35x40 0.15 1.9 0.503 390 30x45 35x35 0.15 1.9 0.510 35x45 0.15 2.1 0.510 470 35x40 0.15 2.1 0.423 35x50 0.15 2.3 0.423 560 35x50 0.15 2.3 0.355 680 35x50 0.15 2.53 0.292 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 Page 62 Sharma Electrolytic Capacitors HW Series Specifications ■ Features • Lifetime:105℃,2000hrs • Wide temperature range for TW • Snap-in terminal • Large ripple current Items Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Smoothing circuit Adapter SMPS Characteristics ±20% (M) (120Hz,20℃) 10~100 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) ■ • • • • • • WV SV 10 13 16 20 25 32 35 44 50 63 160~450 VDC -25 ~ +105℃ 63 80 100 160 180 200 250 315 350 400 450 79 100 125 200 225 250 300 365 400 450 500 Leakage Current (Max) (20℃) I≦0.02CV or 3mA whichever is smaller (After rated voltage applied for 5 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Dissipation Factor(tanδ)shall not exceed the values showed in the table of standard rating After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current Frequency coefficient Freq. (Hz) 50 Coefficient 0.80 60 0.85 Temperature coefficient Ambient Temperature (℃) 40 Coefficient 2.73 Tel: (949)642-7324 120 1.00 45 2.60 50 2.47 400 1.14 55 2.33 60 2.18 1K 1.23 65 2.02 SECI Engineers & Buyers' Guide 2.4K 1.30 70 1.85 75 1.65 5K 1.36 80 1.44 10K~100K 1.40 85 1.18 Fax: (949)642-7327 Page 63 105 1.00 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ/ 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) 10 WV ψDxL RC SPEC μF 16 tanδ 6800 8200 10000 12000 15000 18000 22000 22x25 1.80 22x30 2.05 22x35 2.45 22x40 2.94 22x45 3.24 27000 33000 39000 25x25 2.05 25x30 2.45 25x30 2.80 25x35 3.15 25x40 3.50 25x45 4.00 25x50 4.45 30x25 2.55 30x30 3.11 30x30 3.28 30x35 3.67 30x40 4.20 30x45 4.67 47000 56000 68000 35x25 3.37 35x30 3.78 35x30 4.08 35x35 4.63 35x40 4.90 35x45 5.50 35x50 6.05 0.5 0.066 0.5 0.055 0.5 0.044 0.5 0.037 0.5 0.030 0.5 0.025 0.5 0.020 0.5 0.017 0.5 0.014 0.5 0.012 0.5 0.010 ψDxL RC μF tanδ 6800 8200 10000 12000 15000 18000 22000 30x25 2.68 30x30 3.02 30x30 3.30 30x35 3.70 30x40 4.15 30x50 4.65 22x25 1.50 22x30 1.80 22x30 1.95 22x35 2.20 22x40 2.47 22x45 2.75 22x50 3.13 25x25 1.95 25x30 2.20 25x35 2.50 25x40 2.80 25x45 3.22 25x50 3.43 30x25 2.45 30x30 2.75 30x35 3.19 30x40 3.47 30x45 3.94 30x50 4.30 27000 Tel: (949)642-7324 35x25 3.10 35x30 3.40 35x35 3.90 35x40 4.30 35x45 4.85 35x25 3.37 35x30 3.81 35x35 4.27 35x40 4.65 35x45 5.25 35x50 5.80 ψDxL RC ESR 3300 5600 25x25 2.05 25x30 2.45 25x30 2.60 25x35 2.90 25x40 3.33 25x45 3.70 tanδ ESR 0.5 0.098 0.5 0.081 0.5 0.066 0.5 0.055 0.5 0.044 0.5 0.037 0.5 0.030 0.5 0.025 0.5 0.020 0.5 0.017 0.5 0.014 35 2700 4700 22x25 1.80 22x30 2.05 22x35 2.45 22x40 2.73 22x45 2.99 22x50 3.43 25 WV SPEC 3900 ψDxL RC ESR 0.4 0.136 0.4 0.113 0.4 0.095 0.4 0.078 0.4 0.065 0.4 0.053 0.4 0.044 0.4 0.035 0.4 0.029 0.4 0.024 0.4 0.020 22x25 1.45 22x30 1.60 22x30 1.80 22x35 2.23 22x40 2.41 22x45 2.68 22x50 3.02 25x25 2.10 25x30 2.30 25x35 2.60 25x40 2.93 25x45 3.20 25x50 3.64 SECI Engineers & Buyers' Guide 30x25 2.37 30x30 2.70 30x30 2.90 30x35 3.20 30x40 3.67 30x45 4.04 35x25 2.96 35x30 3.30 35x30 3.60 35x35 4.00 35x40 4.60 35x50 5.10 tanδ ESR 0.35 0.172 0.35 0.141 0.35 0.119 0.35 0.099 0.35 0.083 0.35 0.068 0.35 0.057 0.35 0.046 0.35 0.039 0.35 0.031 0.35 0.026 0.35 0.021 Fax: (949)642-7327 Page 64 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ/ 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV 50 63 SPEC ψDxL ψDxL tanδ tanδ ESR ESR μF RC RC 1200 1500 1800 2200 2700 3300 3900 4700 22x25 1.25 22x30 1.45 22x30 1.60 22x35 1.80 22x40 2.05 22x45 2.27 22x50 2.50 5600 25x25 1.60 25x30 1.80 25x30 1.95 25x35 2.20 25x40 2.42 25x45 2.70 6800 8200 30x25 2.01 30x30 2.29 30x30 2.40 30x35 2.70 30x40 3.06 30x45 3.38 10000 12000 35x25 2.45 35x30 2.78 35x30 3.00 35x35 3.35 35x40 3.70 35x50 4.20 0.30 0.265 0.30 0.221 0.30 0.181 0.30 0.147 0.30 0.121 0.30 0.102 0.30 0.085 0.30 0.071 0.30 0.059 0.30 0.049 0.30 0.040 0.30 0.033 ψDxL RC SPEC μF tanδ 1500 1800 2200 2700 22x25 1.20 22x30 1.35 22x35 1.59 22x40 1.78 22x45 2.01 25x25 1.50 25x30 1.70 25x35 1.95 25x40 2.17 25x45 2.45 3300 3900 4700 5600 Tel: (949)642-7324 30x25 1.75 30x30 2.03 30x30 2.15 30x35 2.45 30x40 2.75 30x45 3.13 35x25 2.19 35x30 2.52 35x35 2.83 35x35 3.10 35x40 3.40 35x50 3.80 35x25 2.35 35x30 2.63 35x30 2.80 35x35 3.15 35x40 3.50 35x45 3.90 ψDxL RC ESR 680 1200 30x25 1.85 30x30 2.08 30x30 2.30 30x35 2.55 30x40 2.86 30x45 3.18 30x50 3.50 0.25 0.276 0.25 0.221 0.25 0.184 0.25 0.151 0.25 0.123 0.25 0.101 0.25 0.085 0.25 0.071 0.25 0.059 0.25 0.048 0.25 0.040 tanδ ESR 0.2 0.474 0.2 0.390 0.2 0.324 0.2 0.265 0.2 0.221 0.2 0.177 0.2 0.147 0.2 0.121 0.2 0.098 0.2 0.080 0.2 0.068 0.2 0.056 100 560 1000 25x25 1.45 25x30 1.60 25x30 1.80 25x35 2.00 25x40 2.32 25x45 2.55 25x50 2.83 80 WV 820 22x25 1.25 22x30 1.45 22x35 1.60 22x40 1.89 22x45 2.06 0.2 0.324 0.2 0.265 0.2 0.221 0.2 0.177 0.2 0.147 0.2 0.121 0.2 0.098 0.2 0.080 0.2 0.068 0.2 0.056 0.2 0.047 22x25 1.20 22x30 1.35 22x30 1.50 22x35 1.70 22x40 1.97 22x45 2.15 25x25 1.50 25x30 1.70 25x35 1.99 25x40 2.19 25x45 2.45 25x50 2.75 SECI Engineers & Buyers' Guide 30x25 1.95 30x30 2.15 30x35 2.45 30x40 2.75 30x45 3.08 30x50 3.45 35x25 2.21 35x30 2.52 35x35 2.86 35x35 3.05 35x40 3.45 35x45 3.90 35x50 4.30 Fax: (949)642-7327 Page 65 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanä / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃)/ MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV 160 180 SPEC ψDxL ψDxL tanδ tanδ ESR ESR μF RC RC 270 330 390 470 560 680 820 22x25 0.85 22x30 1.00 22x30 1.15 22x35 1.30 22x40 1.57 22x45 1.75 22x50 2.03 1000 25x25 1.15 25x30 1.30 25x30 1.50 25x35 1.70 25x40 1.97 25x45 2.15 1200 1500 30x25 1.54 30x30 1.77 30x30 1.95 30x35 2.15 30x40 2.45 30x50 2.75 1800 2200 35x25 1.99 35x30 2.21 35x35 2.52 35x40 2.75 35x45 3.00 35x50 3.50 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 0.15 0.355 0.15 0.293 0.15 0.243 0.15 0.199 0.15 0.166 0.15 0.133 0.15 0.111 0.15 0.090 ψDxL RC SPEC μF tanδ 390 470 560 680 820 22x25 0.85 22x30 1.00 22x30 1.15 22x35 1.30 22x40 1.52 22x45 1.70 25x25 1.15 25x30 1.30 25x35 1.54 25x35 1.65 25x45 1.97 25x50 2.20 1000 1200 1500 Tel: (949)642-7324 30x25 1.49 30x30 1.72 30x35 1.97 30x35 2.10 30x45 2.32 30x50 2.75 35x30 2.02 35x30 2.16 35x35 2.30 35x40 2.75 35x45 2.90 35x25 1.84 35x30 2.11 35x30 2.25 35x35 2.55 35x40 2.85 35x50 3.10 ψDxL RC ESR 180 330 30x25 1.60 30x30 1.80 30x35 2.05 30x40 2.29 30x45 2.57 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 0.15 0.355 0.15 0.293 0.15 0.243 0.15 0.199 0.15 0.166 0.15 0.133 0.15 0.111 tanδ ESR 0.15 1.33 0.15 1.11 0.15 0.905 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 0.15 0.355 0.15 0.293 0.15 0.243 0.15 0.199 0.15 0.166 250 150 270 25x25 1.25 25x30 1.40 25x35 1.63 25x40 1.82 25x45 2.05 25x50 2.27 200 WV 220 22x25 0.85 22x30 1.10 22x35 1.32 22x40 1.47 22x45 1.70 22x50 1.87 0.15 0.905 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 0.15 0.355 0.15 0.293 0.15 0.243 0.15 0.199 0.15 0.166 0.15 0.133 22x25 0.75 22x30 0.85 22x30 1.00 22x35 1.22 22x40 1.36 22x45 1.54 22x50 1.78 25x25 1.00 25x25 1.15 25x30 1.30 25x35 1.48 25x40 1.75 25x40 1.80 25x50 2.10 SECI Engineers & Buyers' Guide 30x25 1.45 30x30 1.72 30x35 1.89 30x40 2.10 30x45 2.30 30x50 2.55 35x25 1.59 35x30 1.88 35x30 1.94 35x35 2.18 35x40 2.39 35x45 2.65 35x50 2.90 Fax: (949)642-7327 Page 66 Sharma Electrolytic Capacitors Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanä / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃)/ MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) 315 WV ψDxL RC SPEC μF 82 100 120 150 180 220 22x25 0.55 22x30 0.65 22x30 0.75 22x35 0.80 22x40 1.01 22x45 1.10 270 330 25x25 0.75 25x30 0.80 25x35 1.02 25x40 1.12 25x45 1.25 25x50 1.53 390 470 30x25 1.00 30x30 1.10 30x35 1.25 30x40 1.53 30x45 1.71 30x50 1.85 560 680 35x30 1.50 35x30 1.60 35x35 1.75 35x40 2.00 35x45 2.20 350 tanδ ESR 0.15 2.43 0.15 1.99 0.15 1.66 0.15 1.33 0.15 1.11 0.15 0.905 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 0.15 0.355 0.15 0.293 ψDxL RC SPEC μF 100 120 150 180 220 270 25x25 0.70 25x30 0.80 25x35 0.87 25x40 1.07 25x45 1.20 25x50 1.31 30x25 0.85 30x30 1.05 30x35 1.18 30x40 1.33 30x45 1.46 30x50 1.65 22x25 0.55 22x30 0.65 22x35 0.79 22x40 0.89 22x45 0.93 22x50 1.14 25x25 0.65 25x25 0.75 25x30 0.85 25x35 0.90 25x40 1.11 25x45 1.20 25x50 1.36 330 390 470 Tel: (949)642-7324 30x25 0.87 30x30 0.94 30x30 1.10 30x35 1.20 30x40 1.38 30x45 1.51 30x50 1.70 tanδ 35x25 0.96 35x25 1.12 35x30 1.24 35x30 1.35 35x35 1.50 35x40 1.70 35x45 1.90 35x25 1.15 35x30 1.30 35x35 1.45 35x40 1.65 35x45 1.85 35x50 2.10 tanδ ESR 0.15 2.43 0.15 1.99 0.15 1.66 0.15 1.33 0.15 1.11 0.15 0.905 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 0.15 0.355 tanδ ESR 0.2 4.74 0.2 3.90 0.2 3.24 0.2 2.65 0.2 2.21 0.2 1.77 0.2 1.47 0.2 1.20 0.2 0.982 0.2 0.804 0.2 0.680 0.2 0.564 450 ψDxL RC ESR 56 82 22x25 0.60 22x30 0.70 22x35 0.80 22x40 0.86 22x45 1.05 22x50 1.16 400 WV 68 ψDxL RC 0.15 2.93 0.15 2.43 0.15 1.99 0.15 1.66 0.15 1.33 0.15 1.11 0.15 0.905 0.15 0.737 0.15 0.603 0.15 0.510 0.15 0.423 22x25 0.55 22x30 0.65 22x35 0.80 22x40 0.89 22x45 0.95 22x50 1.14 25x25 0.75 25x30 0.85 25x35 0.92 25x40 1.11 25x45 1.25 25x50 1.36 SECI Engineers & Buyers' Guide 30x25 0.90 30x30 1.10 30x35 1.24 30x40 1.38 30x45 1.51 30x50 1.70 35x25 1.20 35x30 1.35 35x35 1.50 35x40 1.70 35x45 1.90 35x50 2.10 Fax: (949)642-7327 Page 67 DW Series ■ Features • Lifetime:105℃,2000hrs ,with 20mm height • Snap-in terminal • Large ripple current ■ Recommended Applications • Smoothing circuit • Adapter Specifications Items Characteristics ±20% (M) (120Hz,20℃) 10~100 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 10 13 16 20 25 32 35 44 50 63 160~450 VDC -25 ~ +105℃ 63 80 100 160 180 200 250 315 350 400 450 79 100 125 200 225 250 300 365 400 450 500 Leakage Current (Max) (20℃) I≦0.02CV or 3mA whichever is smaller (After rated voltage applied for 5 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Dissipation Factor(tanδ)shall not exceed the values showed in the table of standard rating After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. Within±20% of the initial value Capacitance Change Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current Frequency coefficient Freq. (Hz) 50 Coefficient 0.80 Temperature coefficient Ambient Temperature (℃) Coefficient 60 0.85 105 1.0 120 1.00 85 1.7 400 1.14 1K 1.23 2.4K 1.30 5K 1.36 10K~100K 1.40 65≧ 2.1 Page 68 Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ/ 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV 10 16 25 35 SPEC ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR μF 1500 20x20 0.40 0.80 0.354 1800 22x20 0.40 0.94 0.295 2200 20x20 0.45 0.98 0.271 22x20 0.40 1.04 0.241 2700 22x20 0.45 1.08 0.221 25x20 0.40 1.29 0.196 30x20 0.40 1.45 0.161 3300 20x20 0.50 1.06 0.201 22x20 0.45 1.29 0.181 3900 20x20 0.50 1.25 0.170 25x20 0.45 1.58 0.153 25x20 0.45 1.61 0.127 4700 20x20 0.55 0.98 0.155 22x20 0.50 1.38 0.141 5600 20x20 0.55 1.16 0.130 25x20 0.50 1.68 0.118 6800 22x20 0.55 1.31 0.107 25x20 0.50 1.80 0.098 8200 25x20 0.55 1.59 0.089 10000 25x20 0.55 1.77 0.073 50 WV SPEC 63 RC ESR 330 20x20 0.20 0.60 0.804 390 20x20 0.20 0.71 0.680 0.65 0.705 22x20 0.20 0.78 0.564 RC ESR ψDxL tanδ 100 ESR ψDxL tanδ μF ψDxL tanδ 80 RC ESR ψDxL tanδ 470 20x20 0.25 RC 20x20 0.25 0.70 0.592 25x20 0.20 0.95 0.474 680 20x20 0.30 0.83 0.585 22x20 0.25 0.84 0.488 25x20 0.20 1.09 0.390 820 22x20 0.30 0.99 0.485 25x20 0.25 1.04 0.404 30x20 0.20 1.32 0.323 25x20 0.25 1.19 0.332 30x20 0.25 1.44 0.276 560 1000 20x20 0.35 0.87 0.464 22x20 0.30 1.10 0.398 1200 22x20 0.35 1.02 0.387 25x20 0.30 1.20 0.332 1500 25x20 0.35 1.15 0.309 30x20 0.30 1.47 0.265 1800 25x20 0.35 1.34 0.258 30x20 0.30 1.52 1.60 0.211 2200 30x20 160 WV SPEC μF 0.35 ψDxL tanδ 180 RC ESR ψDxL tanδ 200 RC ESR ψDxL tanδ 250 RC ESR ψDxL tanδ RC ESR 20x20 0.15 0.59 1.99 0.63 1.66 22x20 0.15 0.65 1.66 100 120 20x20 0.15 20x20 0.15 0.66 1.33 20x20 0.15 0.66 1.33 25x20 0.15 0.74 1.33 180 20x20 0.15 0.69 1.11 22x20 0.15 0.80 1.11 22x20 0.15 0.80 1.11 25x20 0.15 0.77 1.11 220 22x20 0.15 0.81 0.904 25x20 0.15 0.90 0.904 25x20 0.15 0.87 0.904 30x20 0.15 0.95 0.904 25x20 0.15 0.95 0.737 25x20 0.15 0.95 0.737 30x20 0.15 1.00 0.737 35x20 0.15 1.16 0.603 150 270 25x20 0.15 0.98 0.737 330 25x20 0.15 1.02 0.603 30x20 0.15 1.15 0.603 30x20 0.15 1.15 0.603 390 30x20 0.15 1.25 0.510 30x20 0.15 1.20 0.510 35x20 0.15 1.20 0.510 470 30x20 0.15 1.30 0.423 35x20 0.15 1.36 0.423 35x20 0.15 1.25 0.423 1.43 0.355 560 35x20 0.15 1.46 0.355 680 35x20 0.15 1.51 0.293 35x20 0.15 Page 69 Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ/ 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV 315 350 400 450 SPEC ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR μF 27 20x20 0.20 0.26 9.82 33 20x20 0.20 0.30 8.04 22x20 0.20 0.36 5.10 39 20x20 0.15 0.34 5.10 20x20 0.15 0.38 4.23 22x20 0.15 0.39 4.23 25x20 0.20 0.41 4.23 56 20x20 0.15 0.41 3.55 20x20 0.15 0.40 3.55 22x20 0.15 0.40 3.55 25x20 0.20 0.43 3.55 68 22x20 0.15 0.48 2.93 22x20 0.15 0.45 2.93 25x20 0.15 0.49 2.93 30x20 0.20 0.50 2.93 25x20 0.15 0.54 2.43 30x20 0.15 0.55 2.43 30x20 0.20 0.53 2.43 47 82 22x20 0.15 0.51 2.43 100 25x20 0.15 0.57 1.99 25x20 0.15 0.57 1.99 30x20 0.15 0.60 1.99 35x20 0.20 0.61 1.99 120 30x20 0.15 0.65 1.66 30x20 0.15 0.65 1.66 35x20 0.15 0.75 1.66 35x20 0.20 0.68 1.66 150 30x20 0.15 0.70 1.33 35x20 0.15 0.78 1.33 35x20 0.15 0.80 180 35x20 0.15 0.85 1.11 35x20 0.15 0.85 1.11 220 35*20 0.15 0.9 0.904 Page 70 SW Series Specifications ■ Features ■ Recommended Applications • Smoothing circuit • Lifetime:105℃,3000hrs • Adapter ,with 20mm height • Longer life range than DW • Snap-in terminal • Large ripple current Items Characteristics ±20% (M) (120Hz,20℃) 10~100 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 10 13 16 20 25 32 35 44 50 63 160~450 VDC -25 ~ +105℃ 63 80 100 160 180 200 250 315 350 400 450 79 100 125 200 225 250 300 365 400 450 500 Leakage Current (Max) (20℃) I≦0.02CV or 3mA whichever is smaller (After rated voltage applied for 5 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Dissipation Factor(tanδ)shall not exceed the values showed in the table of standard rating After applying rated voltage for 3000 hours at 105℃, the capacitor shall meet the following requirement. Within±20% of the initial value Capacitance Change Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) Multiplier for Ripple Current Frequency coefficient Freq. (Hz) 50 Coefficient 0.80 Temperature coefficient Ambient Temperature (℃) Coefficient 60 0.85 105 1.0 120 1.00 85 1.7 400 1.14 1K 1.23 2.4K 1.30 5K 1.36 10K~100K 1.40 65≧ 2.1 Page 71 Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ/ 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV 10 16 25 35 SPEC ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR μF 1500 20x20 0.40 0.80 0.354 1800 22x20 0.40 0.94 0.295 2200 20x20 0.45 0.98 0.271 22x20 0.40 1.04 0.241 2700 22x20 0.45 1.08 0.221 25x20 0.40 1.29 0.196 30x20 0.40 1.45 0.161 3300 20x20 0.50 1.06 0.201 22x20 0.45 1.29 0.181 3900 20x20 0.50 1.25 0.170 25x20 0.45 1.58 0.153 25x20 0.45 1.61 0.127 4700 20x20 0.55 0.98 0.155 22x20 0.50 1.38 0.141 5600 20x20 0.55 1.16 0.130 25x20 0.50 1.68 0.118 6800 22x20 0.55 1.31 0.107 25x20 0.50 1.80 0.098 8200 25x20 0.55 1.59 0.089 10000 25x20 0.55 1.77 0.073 50 WV SPEC 63 RC ESR 330 20x20 0.20 0.60 0.804 390 20x20 0.20 0.71 0.680 0.65 0.705 22x20 0.20 0.78 0.564 RC ESR ψDxL tanδ 100 ESR ψDxL tanδ μF ψDxL tanδ 80 RC ESR ψDxL tanδ 470 20×20 0.25 RC 20x20 0.25 0.70 0.592 25x20 0.20 0.95 0.474 680 20x20 0.30 0.83 0.585 22x20 0.25 0.84 0.488 25x20 0.20 1.09 0.390 820 22x20 0.30 0.99 0.485 25x20 0.25 1.04 0.404 30x20 0.20 1.32 0.323 25x20 0.25 1.19 0.332 30x20 0.25 1.44 0.276 560 1000 20x20 0.35 0.87 0.464 22x20 0.30 1.10 0.398 1200 22x20 0.35 1.02 0.387 25x20 0.30 1.20 0.332 1500 25x20 0.35 1.15 0.309 30x20 0.30 1.47 0.265 1800 25x20 0.35 1.34 0.258 30x20 0.30 1.52 1.60 0.211 2200 30x20 160 WV SPEC μF 0.35 ψDxL tanδ 180 RC ESR ψDxL tanδ 200 RC ESR ψDxL tanδ 250 RC ESR ψDxL tanδ RC ESR 20x20 0.15 0.59 1.99 0.63 1.66 22x20 0.15 0.65 1.66 100 120 20x20 0.15 20x20 0.15 0.66 1.33 20x20 0.15 0.66 1.33 25x20 0.15 0.74 1.33 180 20x20 0.15 0.69 1.11 22x20 0.15 0.80 1.11 22x20 0.15 0.80 1.11 25x20 0.15 0.77 1.11 220 22x20 0.15 0.81 0.904 25x20 0.15 0.90 0.904 25x20 0.15 0.87 0.904 30x20 0.15 0.95 0.904 25x20 0.15 0.95 0.737 25x20 0.15 0.95 0.737 30x20 0.15 1.00 0.737 35x20 0.15 1.16 0.603 150 270 25x20 0.15 0.98 0.737 330 25x20 0.15 1.02 0.603 30x20 0.15 1.15 0.603 30x20 0.15 1.15 0.603 390 30x20 0.15 1.25 0.510 30x20 0.15 1.20 0.510 35x20 0.15 1.20 0.510 470 30x20 0.15 1.30 0.423 35x20 0.15 1.36 0.423 35x20 0.15 1.25 0.423 1.43 0.355 560 35x20 0.15 1.46 0.355 680 35x20 0.15 1.51 0.293 35x20 0.15 Page 72 Case Size / Max Ripple Current / tanδ / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ/ 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(Arms) / 120Hz,105℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV 315 350 400 450 SPEC ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR ψDxL tanδ RC ESR μF 27 20x20 0.20 0.26 9.82 33 20x20 0.20 0.30 8.04 22x20 0.20 0.36 5.10 39 20x20 0.15 0.34 5.10 20x20 0.15 0.38 4.23 22x20 0.15 0.39 4.23 25x20 0.20 0.41 4.23 56 20x20 0.15 0.41 3.55 20x20 0.15 0.40 3.55 22x20 0.15 0.40 3.55 25x20 0.20 0.43 3.55 68 22x20 0.15 0.48 2.93 22x20 0.15 0.45 2.93 25x20 0.15 0.49 2.93 30x20 0.20 0.50 2.93 25x20 0.15 0.54 2.43 30x20 0.15 0.55 2.43 30x20 0.20 0.53 2.43 47 82 22x20 0.15 0.51 2.43 100 25x20 0.15 0.57 1.99 25x20 0.15 0.57 1.99 30x20 0.15 0.60 1.99 35x20 0.20 0.61 1.99 120 30x20 0.15 0.65 1.66 30x20 0.15 0.65 1.66 35x20 0.15 0.75 1.66 35x20 0.20 0.68 1.66 150 30x20 0.15 0.70 1.33 35x20 0.15 0.78 1.33 35x20 0.15 0.80 180 35x20 0.15 0.85 1.11 35x20 0.15 0.85 1.11 220 35*20 0.15 0.9 0.904 Page 73 EL ■ Features • Lifetime:60℃,2.5V,1000hrs Specifications Items -20 Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Characteristics ~ +40% (25℃) 2.5VDC -25 ~ +60℃ C= Nominal Capacitance (F) V= Rated Voltage (V) ±30%(25℃) Capacitance Change Low Temperature Stability ≦ 4 times AC(1KHz) After applying rated voltage for 1000 hours at 60℃, the capacitor shall meet the following requirement. Load Life Capacitance Change Within±30% of the initial value AC(1KHz) Not more than 200% of the specified value After placed at 60℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as Load life. Shelf Life Dimensions (mm) ψD 13 16 18 22 P 7.5 7.5 7.5 10.0 ψd 0.6 0.8 0.8 1.0 DIP 2.5(V.DC) WV SPEC ΨDxL(mm) AC(Ω) at 1KHZ 7 13x25 0.1 14 16x26 0.08 20 16x32 0.06 30 18x36 0.06 36 18x40 0.05 45 22x35 0.05 54 22x40 0.05 F Page 74 EG ■ Features • Lifetime:60℃,2.5V,1000hrs • High Capacitance Specifications Items -20 Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Characteristics ~ +40% (25℃) 2.5 VDC -25 ~ +60℃ C= Nominal Capacitance (F) V= Rated Voltage (V) ±30%(25℃) Capacitance Change Low Temperature Stability ≦ 4 times AC(1KHz) After applying rated voltage for 1000 hours at 60℃, the capacitor shall meet the following requirement. Load Life Capacitance Change Within±30% of the initial value AC(1KHz) Not more than 200% of the specified value After placed at 60℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as Load life. Shelf Life Dimensions (mm) ψD 8 10 13 16 18 P 3.5 5.0 7.5 7.5 7.5 10.0 ψd 0.6 0.6 0.6 0.8 0.8 22 1.0 DIP 2.5(V.DC) WV SPEC ΨDxL(mm) AC(Ω) at 1KHZ 4 10x20 0.2 10 13x25 0.1 15 16x26 0.06 25 16x32 0.05 40 18x36 0.05 50 18x40 0.04 55 22*35 0.04 70 22*40 0.03 F Page 75 GV Series ■ Features • Lifetime:85℃,2000hrs • Low profile vertical chip ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +85℃ 4 6.3 10 16 25 35 5 8 13 20 32 44 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) WV SV Surge Voltage (V) (20℃) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 50 63 Shown in the table of standard rating Low Temperature Stability Impedance Ratio (Max) WV Z(120Hz) Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life 4 Capacitance Change Dissipation Factor Leakage Current 6.3 10 16 25 35 50 7 4 3 2 2 2 15 8 6 4 4 3 After applying rated voltage for 2000 hours at 85℃, the capacitor shall meet the following requirement. Within±20% of the initial value Not move than 200% of the specified value Not more than the specified value 2 3 After placed at 85℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Shelf Life Applicable standards Dimensions (mm) ψD L A H I W P K 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 +0.15 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 0.35 ( ) : Reference size Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient Temperature coefficient Ambient Temperature (℃) Coefficient 60 0.80 120 1.00 ≦50 1.36 1K 1.15 70 1.25 10K~100K 1.25 85 1.00 Page 76 Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV SPEC μF 4 ψDxL tanδ 6.3 RC ESR ψDxL tanδ 10 RC ESR ψDxL tanδ 16 RC ESR ψDxL tanδ RC ESR 4.7 4x5.4 0.16 20 45.1 10 0.16 0.26 0.16 0.26 0.16 0.16 28 27 39 45 66 70 21.1 4x5.4 0.30 28 18.0 7.33 4x5.4 5x5.4 5x5.4 0.30 0.20 0.30 29 43 43 12.0 8.03 8.46 4x5.4 4x5.4 5x5.4 5x5.4 6.3x5.4 6.3x5.4 71 3.44 6.3x5.4 0.26 70 3.44 6.3x5.4 0.20 70 2.65 0.35 250 2.11 8x6.2 0.26 250 1.56 8x10.2 0.20 280 1.20 8x6.2 0.35 300 1.40 8x10.2 0.26 330 1.04 10x10.2 0.20 380 0.803 470 8x10.2 0.35 380 0.987 10x10.2 0.26 400 0.733 10x10.2 0.20 420 0.564 1000 10x10.2 0.35 700 0.464 10x10.2 0.26 580 0.344 ESR ψDxL tanδ RC ESR 0.1 4x5.4 0.12 1 1593 0.22 4x5.4 0.12 2 723 0.33 4x5.4 0.12 3 482 0.47 4x5.4 0.12 5 338 1 4x5.4 0.12 10 159 22 4x5.4 0.35 19 21.1 4x5.4 0.26 20 15.6 33 4x5.4 0.35 26 14.0 5x5.4 0.26 22 10.4 47 4x5.4 0.35 34 9.87 5x5.4 0.26 46 100 5x5.4 0.35 61 4.64 6.3x5.4 0.26 220 6.3x5.4 0.35 82 2.11 8x6.2 330 WV SPEC μF 25 ψDxL tanδ 35 RC ESR ψDxL tanδ 50 RC 2.2 4x5.4 0.12 8 72.3 4x5.4 0.12 16 72.3 3.3 4x5.4 0.12 10 48.2 4x5.4 0.12 16 48.2 5x5.4 0.12 23 33.8 6.3x5.4 0.12 35 15.9 4.7 4x5.4 4x5.4 5x5.4 0.14 0.20 0.14 22 24 28 39.5 26.5 18.5 4x5.4 4x5.4 5x5.4 0.12 0.16 0.12 22 24 30 33.8 21.2 15.9 22 6.3x5.4 0.14 55 8.44 6.3x5.4 0.12 60 7.23 8x6.2 0.12 110 7.23 33 6.3x5.4 6.3x5.4 8x6.2 0.14 0.20 0.16 65 70 96 5.62 5.64 4.51 8x6.2 0.14 130 5.62 8x10.2 0.12 120 4.82 8x6.2 0.14 165 3.95 10x10.2 0.12 130 3.38 100 8x10.2 0.16 180 2.12 10x10.2 0.14 210 1.85 10x10.2 0.12 190 1.59 220 10x10.2 0.16 310 0.964 10x10.2 0.14 310 0.844 10 47 Page 77 15.6 10.4 6.43 4.51 FV Series ■ Features • Lifetime:85℃,3000~5000hrs • Long life for GV • Low profile vertical chip ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) Leakage Current (Max) (20℃) Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +85℃ 4 6.3 10 16 25 35 5 8 13 20 32 44 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 50 63 Shown in the table of standard rating WV 4 6.3 10 16 25 35 50 Z(120Hz) Z(-25℃) / Z(20℃) 7 4 3 2 2 2 2 Z(-40℃) / Z(20℃) 15 8 6 4 4 3 3 After applying rated voltage for 3000 ~ 5000 hours at 85℃, the capacitor shall meet the following requirement. Capacitance Change Within ±20% of the initial value Case (ψ) Life time (hrs) Not move than 200% of the specified ψD≦6.3 Dissipation Factor 3000 value Leakage Current Not more than the specified value ψD≧8 5000 After placed at 85℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life Applicable standards Dimensions (mm) ψD L A H I W P 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 K 0.35 +0.15 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 ( ) : Reference size Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient Temperature coefficient Ambient Temperature (℃) Coefficient 60 0.80 120 1.00 ≦50 1.36 1K 1.15 70 1.25 10K~100K 1.25 85 1.00 Page 78 Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanä / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV SPEC 4 ESR 4.7 4x5.4 0.16 20 45.1 10 0.16 0.26 0.16 0.26 0.16 0.16 28 27 39 45 66 70 21.1 ESR RC ESR ψDxL 16 RC RC ψDxL tanä 10 ESR ψDxL tanä μF ΨDxL tanä 6.3 tanä RC 4x5.4 0.30 28 18.0 7.33 4x5.4 5x5.4 5x5.4 0.30 0.20 0.30 29 43 43 12.0 8.03 8.46 4x5.4 4x5.4 5x5.4 5x5.4 6.3x5.4 6.3x5.4 71 3.44 6.3x5.4 0.26 70 3.44 6.3x5.4 0.20 70 2.65 0.35 250 2.11 8x6.2 0.26 250 1.56 8x10.2 0.20 280 1.20 8x6.2 0.35 300 1.40 8x10.2 0.26 330 1.04 10x10.2 0.20 380 0.803 470 8x10.2 0.35 380 0.987 10x10.2 0.26 400 0.733 10x10.2 0.20 420 0.564 1000 10x10.2 0.35 700 0.464 10x10.2 0.26 580 0.344 tanä RC ESR 22 4x5.4 0.35 19 21.1 4x5.4 0.26 20 15.6 33 4x5.4 0.35 26 14.0 5x5.4 0.26 22 10.4 47 4x5.4 0.35 34 9.87 5x5.4 0.26 46 100 5x5.4 0.35 61 4.64 6.3x5.4 0.26 220 6.3x5.4 0.35 82 2.11 8x6.2 330 WV SPEC μF 25 ψDxL tanä 35 RC ESR ψDxL tanä 50 RC ESR ψDxL 0.1 4x5.4 0.12 1 1593 0.22 4x5.4 0.12 2 723 0.33 4x5.4 0.12 3 482 0.47 4x5.4 0.12 5 338 1 4x5.4 0.12 10 159 2.2 4x5.4 0.12 8 72.3 4x5.4 0.12 16 72.3 3.3 4x5.4 0.12 10 48.2 4x5.4 0.12 16 48.2 5x5.4 0.12 23 33.8 6.3x5.4 0.12 35 15.9 8x6.2 0.12 110 7.23 4.7 10 22 33 4x5.4 0.14 22 39.5 4x5.4 0.12 22 33.8 4x5.4 5x5.4 6.3x5.4 0.20 0.14 0.14 24 28 55 26.5 18.5 8.44 4x5.4 5x5.4 6.3x5.4 0.16 0.12 0.12 24 30 60 21.2 15.9 7.23 8x6.2 0.14 130 5.62 8x10.2 0.12 120 4.82 8x6.2 0.14 165 3.95 10x10.2 0.12 130 3.38 6.3x5.4 0.14 65 5.62 100 6.3x5.4 8x6.2 8x10.2 0.20 0.16 0.16 70 96 180 5.64 4.51 2.12 10x10.2 0.14 210 1.85 10x10.2 0.12 190 1.59 220 10x10.2 0.16 310 0.964 10x10.2 0.14 310 0.844 10x10.2 0.12 300 0.723 47 Page 79 15.6 10.4 6.43 4.51 SV Series Specifications ■ Features • Lifetime:105℃,1000hrs • Wide temperature range for GV • Low profile vertical chip ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Items Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 4 5 6.3 8 10 13 16 20 25 32 35 44 50 63 Leakage Current (Max) (20℃) I≦0.01CV or 3μA whichever is greater(After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Shown in the table of standard rating WV Z(120Hz) Low Temperature Stability Impedance Ratio (Max) 4 6.3 10 16 25 35 50 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 7 4 3 2 2 2 15 8 6 4 4 3 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life . Load Life Shelf Life 2 3 Refer to JIS C 5101 Applicable standards Dimensions (mm) ( ) : Reference size Multiplier for Ripple Current Frequency coefficient Frequency (Hz) 60 Coefficient 0.85 Temperature coefficient Ambient Temperature (℃) Coefficient ψD L A H I W P 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 0.35 -0.20 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 0.35 -0.20 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 0.35 -0.20 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 0.35 -0.20 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 120 1.00 ≦50 1.90 70 1.75 1K 1.15 85 1.40 K +0.15 +0.15 +0.15 +0.15 10K~100K 1.25 105 1.00 Page 80 Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz, 105℃) / MAX EQUIVALENT SERIES RESISTANCE (ESR(Ω) / 120Hz,20℃) 4 WV SPEC μF ψDxL tanδ 6.3 RC ESR ψDxL tanδ 10 RC ESR ψDxL tanδ 16 RC ESR ψDxL tanδ RC 4.7 10 ESR 4x5.4 0.16 20 45.1 4x5.4 0.30 24 39.7 4x5.4 0.16 28 21.2 5x5.4 0.16 39 9.64 22 4x5.4 0.35 20 21.1 4x5.4 0.30 29 18.0 4x5.4 0.30 36 18.0 33 4x5.4 0.35 26 14.0 4x5.4 0.30 43 12.0 4x5.4 0.30 45 12.0 6.3x5.4 0.20 65 8.03 47 4x5.4 0.35 34 9.87 5x5.4 0.30 46 8.46 6.3x5.4 0.30 70 8.46 6.3x5.4 0.20 70 5.64 100 5x5.4 0.35 61 4.64 6.3x5.4 0.35 71 4.64 8x6.2 0.30 110 3.97 0.20 130 2.65 220 6.3x5.4 0.35 82 2.11 8x6.2 0.35 130 2.11 8x10.2 0.26 160 1.80 10x10.2 0.20 210 1.20 330 8x10.2 0.35 230 1.40 10x10.2 0.26 230 1.04 10x10.2 0.20 230 0.803 470 10x10.2 0.35 260 0.987 10x10.2 0.26 270 0.733 10x10.2 0.20 275 0.564 1000 10x10.2 0.35 380 0.464 10x10.2 0.26 390 0.344 ESR ψDxL tanδ RC ESR 0.1 4x5.4 0.12 1 1593 0.22 4x5.4 0.12 2 723 0.33 4x5.4 0.12 3 482 0.47 4x5.4 0.12 5 338 1 4x5.4 0.12 10 159 25 WV SPEC μF ψDxL tanδ 35 RC ESR ψDxL tanδ 8x6.2 50 RC 2.2 4x5.4 0.12 15 72.3 4x5.4 0.12 16 72.3 3.3 4x5.4 0.12 18 48.2 4x5.4 0.12 16 48.2 4.7 4x5.4 0.14 22 39.5 4x5.4 0.12 22 33.8 5x5.4 0.12 23 33.8 10 5x5.4 0.14 28 18.5 5x5.4 0.12 30 15.9 6.3x5.4 0.12 35 15.9 22 6.3x5.4 0.14 55 8.44 6.3x5.4 0.14 60 8.44 8x6.2 0.12 70 7.23 33 6.3x5.4 0.16 65 6.43 8x6.2 0.14 84 5.62 8x10.2 0.12 91 4.82 47 8x6.2 0.16 91 4.51 8x10.2 0.14 98 3.95 10x10.2 0.12 100 3.38 100 8x10.2 0.16 130 2.12 10x10.2 0.14 160 1.85 10x10.2 0.12 145 1.59 220 10x10.2 0.16 273 0.964 10x10.2 0.14 240 0.844 Page 81 DV Series ■ • • • Features Lifetime:105℃,2000hrs Long life for SV Low profile vertical chip ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Characteristics ±20% (M) (120Hz,20℃) 6.3~50 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 6.3 8 10 13 16 20 25 32 35 44 50 63 Leakage Current (Max) (20℃) I≦0.01CV or 3μA whichever is greater(After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Shown in the table of standard rating WV Z(120Hz) Low Temperature Stability Impedance Ratio (Max) Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Case (ψ) Load Life 6.3 10 16 25 35 50 4 3 2 2 2 8 6 4 4 3 After applying rated voltage for 2000 hours at 105℃, the capacitor shall meet the following requirement. ψ4 toψ6.3 ψ8 toψ10 2 3 Capacitance Change Within±25% of the initial value Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Shelf Life Refer to JIS C 5101 Applicable standards Dimensions (mm) ( ) : Reference size ψD L A H I W P 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 0.35 -0.20 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 0.35 -0.20 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 0.35 -0.20 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 0.35 -0.20 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 K +0.15 +0.15 +0.15 +0.15 Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient Temperature coefficient Ambient Temperature (℃) Coefficient 60 0.85 120 1.00 ≦50 1.90 70 1.75 1K 1.15 85 1.40 10K~100K 1.25 105 1.00 Page 82 Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz, 105℃)/ MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) 6.3 WV SPEC μF ψDxL tanδ 10 RC ESR ψDxL tanδ 16 RC ESR 10 ψDxL tanδ RC ESR 4x5.4 0.16 28 21.2 22 5x5.4 0.30 29 18.0 5x5.4 0.22 36 13.2 5x5.4 0.16 39 9.64 33 5*x5.4 0.30 43 12.0 5x5.4 0.22 45 8.84 6.3x5.4 0.16 65 6.43 47 6.3x5.4 0.30 46 8.46 6.3x5.4 0.22 70 6.20 6.3x5.4 0.16 70 4.51 100 6.3x5.4 0.30 71 3.97 8x6.2 0.30 110 3.97 8x10.2 0.20 140 2.65 220 8x10.2 0.35 150 2.11 8x10.2 0.30 160 1.80 10x10.2 0.20 210 1.20 330 8x10.2 0.35 230 1.40 10x10.2 0.26 230 1.04 10x10.2 0.20 230 0.803 470 10x10.2 0.35 260 0.987 10x10.2 0.26 270 0.733 10x10.2 0.20 275 0.564 1000 10x10.2 0.35 380 0.464 10x10.2 0.26 390 0.344 25 WV SPEC tanδ RC ESR 0.1 4x5.4 0.12 1 1593 0.22 4x5.4 0.12 2 723 0.33 4x5.4 0.12 3 482 0.47 4x5.4 0.12 5 338 1 4x5.4 0.12 10 159 2.2 4x5.4 0.12 16 72.3 3.3 4x5.4 0.12 16 48.2 tanδ RC ESR ψDxL 50 ψDxL μF ψDxL 35 tanδ RC ESR 4.7 4x5.4 0.14 22 39.5 5x5.4 0.12 23 33.8 5x5.4 0.12 23 33.8 6.8 4x5.4 0.14 25 27.3 5x5.4 0.12 27 23.4 5x5.4 0.12 30 23.4 10 5x5.4 0.14 28 18.5 5x5.4 0.12 30 15.9 5x5.4 0.12 35 15.9 22 6.3x5.4 0.14 55 8.44 6.3x5.4 0.14 60 7.23 8x10.2 0.12 70 7.23 33 6.3x5.4 0.14 65 5.62 8x6.2 0.14 84 5.62 8x10.2 0.12 91 4.82 47 8x6.2 0.16 91 4.51 8x10.2 0.14 98 3.95 10x10.2 0.12 100 3.38 100 8x10.2 0.16 130 2.12 10x10.2 0.14 160 1.85 10x10.2 0.12 145 1.59 220 10x10.2 0.16 273 0.964 10x10.2 0.14 240 0.844 Page 83 RV ■ • • • • Series Features Lifetime:85℃,1000hrs Non-polarized Low profile vertical chip 5.5mm height (≦ψ6.3) ■ • • • • Recommended Applications AV(TV, Video, Audio) Monitor/Co mputer OA/HA/Communication Reversed polarity circuit Specifications Items Characteristics ±20% (M) (120Hz,20℃) 6.3~50 VDC -40 ~ +85℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Surge Voltage (V) (20℃) WV SV 6.3 8 WV Shelf Life 25 32 35 44 50 63 Shown in the table of standard rating Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Load Life 16 20 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Low Temperature Stability Impedance Ratio (Max) 10 13 Z(120Hz) 6.3 10 16 25 35 50 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 4 3 2 2 2 8 6 4 4 3 After applying rated voltage for 1000 hours at 85℃, the capacitor shall meet the following requirements. (The polarity shall be reversed every 250 hours) Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 85℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life . 2 3 Refer to JIS C 5101 Applicable standards Dimensions (mm) ψD L A φD 4.0 5.4 4.3 H I W P K 5.5 Max 1.8 0.65±0.1 1.0±0.2 0.35 -0.20 +0.15 +0.15 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 0.35 -0.20 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 0.35 -0.20 ( ) : Reference size Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient Temperature coefficient Ambient Temperature (℃) Coefficient 60 0.85 120 1.00 ≦50 1.36 1K 1.10 70 1.25 10K 1.20 85 1.00 Page 84 +0.15 Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tan ä / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz, 85℃) / MAX EQUIVALENT SERIES RESISTANCE (ESR(Ω) / 120Hz,20℃) WV SPEC μF 6.3 10 ψDxL tanδ RC ESR ψDxL tanδ 16 RC 25 ψDxL tanδ RC ESR ESR ψDxL tanδ RC ESR 2.2 3.3 4.7 10 70.5 6.3x5.4 0.28 28 33.1 33.1 6.3x5.4 0.32 39 15.0 39 18.0 33 6.3x5.4 0.52 43 12.0 6.3x5.4 0.40 43 14.0 47 6.3x5.4 0.52 46 9.87 35 ψDxL tanδ 21 25 0.40 SPEC 0.28 0.32 6.3x5.4 μF 5x5.4 5x5.4 21.1 WV 70.5 39.7 29 100 20 25 0.52 12 0.32 0.40 5x5.4 0.28 4x5.4 4x5.4 22 4x5.4 50 RC ESR ψDxL tanδ RC ESR 0.22 4x5.4 0.24 2 1507 0.33 4x5.4 0.24 3 1004 0.47 4x5.4 0.24 5 705 1 4x5.4 0.24 10 331 2.2 4x5.4 0.24 12 150 5x5.4 0.24 16 150 3.3 5x5.4 0.24 21 100 5x5.4 0.24 21 100 4.7 5x5.4 0.24 22 70.5 6.3x5.4 0.24 31 70.5 10 6.3x5.4 0.24 30 33.1 Page 85 ZV Series ■ • • • • Features Lifetime:105℃,1000hrs Wide temperature range Low profile vertical chip Low impedance Specifications ■ • • • • • Recommended Applications Monitor/Computer Battery charger DC/DC converter SMPS Noise filter Items Characteristics ±20% (M) (120Hz,20℃) 6.3~50 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 6.3 8 WV tanδ 4 0.35 WV Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life 10 13 16 20 25 32 35 44 50 63 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 4 5 Z(120Hz) 6.3 0.26 10 0.19 4 6.3 16 0.16 10 25 0.14 16 35 0.12 25 50 0.12 35 50 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 4 2 2 2 2 2 8 4 4 3 3 3 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life . 2 3 Refer to JIS C 5101 Applicable standards D imensions (m m ) ψD L A H I W P K 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 0.35 -0.20 +0.15 0.35 -0.20 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 0.35 -0.20 +0.15 0.35 -0.20 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 +0.15 +0.15 ( ) : Reference size M ultiplier for R ipple Current Frequency coefficient Frequency (Hz) Coefficient 120 0.70 1K 0.80 10K 0.90 100K 1.00 Temperature coefficient Ambient Temperature (℃) Coefficient ≦50 1.90 70 1.75 85 1.40 105 1.00 Page 86 Case Size / M ax Ripple Current / Im pedance CASE SIZE (ψDxL(mm)) / MAX PERMISSIBLE RIPPLE CURRENT(RC(mArms) / 100KHz,105℃) / MAX IMPEDANCE(Z(Ω) / 100KHz,20℃) 4 WV SPEC 6.3 ψDxL RC Z RC Z 4.7 4x5.4 60 4.0 4x5.4 60 4.0 6.8 4x5.4 60 4.0 4x5.4 60 4.0 10 4x5.4 60 4.0 22 4x5.4 60 4.0 4x5.4 60 33 4x5.4 60 4.0 5x5.4 47 4x5.4 60 4.0 RC Z ψDxL 16 ψDxL μF ψDxL 10 RC Z 4x5.4 60 4.0 4x5.4 60 4.0 4.0 5x5.4 95 2.6 5x5.4 95 2.6 95 2.6 5x5.4 95 2.6 5x5.4 95 2.6 5x5.4 95 2.6 6.3x5.4 95 1.3 6.3x5.4 140 1.3 68 4x5.4 60 4.0 6.3x5.4 140 1.3 6.3x5.4 140 1.3 8x6.2 230 0.8 100 5x5.4 95 3.0 6.3x5.4 140 1.3 6.3x5.4 140 1.3 8x6.2 230 0.8 150 6.3x5.4 140 2.6 8x6.2 230 0.8 8x6.2 230 0.8 10x10.2 450 0.5 220 6.3x5.4 140 2.6 8x6.2 230 0.8 8x6.2 230 0.8 10x10.2 450 0.5 330 8x10.2 450 0.5 8x10.2 450 0.5 10x10.2 670 0.3 470 10x10.2 670 0.3 10x10.2 670 0.3 10x10.2 670 0.3 1000 10x10.2 670 0.3 10x10.2 670 0.3 WV SPEC 25 RC Z 0.1 4x5.4 60 5.0 0.22 4x5.4 60 5.0 0.33 4x5.4 60 5.0 0.47 4x5.4 60 5.0 RC Z ψDxL 50 ψDxL μF ψDxL 35 RC Z 1 4x5.4 60 4.0 4x5.4 60 5.0 2.2 4x5.4 60 4.0 4x5.4 60 5.0 3.3 4x5.4 60 4.0 4x5.4 60 5.0 4.7 4x5.4 60 4.0 4x5.4 60 4.0 5x5.4 95 4.0 6.8 4x5.4 60 4.0 5x5.4 95 2.6 6.3x5.4 140 2.6 10 5x5.4 95 2.6 5x5.4 95 2.6 6.3x5.4 140 2.6 22 6.3x5.4 140 1.3 6.3x5.4 140 1.3 8x6.2 230 1.3 33 6.3x5.4 140 1.3 8x6.2 230 0.8 8x10.2 300 1.1 47 6.3x5.4 140 1.3 8x6.2 230 0.8 10x10.2 670 0.8 68 8x10.2 450 0.5 8x10.2 450 0.5 10x10.2 670 0.8 100 8x10.2 450 0.5 10x10.2 670 0.3 10x10.2 670 0.8 150 10x10.2 670 0.3 10x10.2 670 0.3 220 10x10.2 670 0.3 10x10.2 670 0.3 Page 87 EV Series ■ • • • • Features Lifetime:105℃,1000hrs Wide temperature range Low profile vertical chip Ultra low impedance Specifications ■ • • • • • Recommended Applications Monitor/Computer Battery charger DC/DC converter SMPS Noise filter Items Characteristics ±20% (M) (120Hz,20℃) 6.3~25 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 6.3 8 10 13 16 20 25 32 Leakage Current (Max) (20℃) I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Shown in the table of standard rating WV Low Temperature Stability Impedance Ratio (Max) Load Life Shelf Life 6.3 Z(120Hz) 10 16 25 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 2 2 2 3 3 3 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. 2 3 Refer to JIS C 5101 Applicable standards Dimensions (mm) ( ) : Reference size ψD L A H I W P K 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 0.35 -0.20 +0.15 0.35 -0.20 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 0.35 -0.20 +0.15 0.35 -0.20 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 +0.15 +0.15 Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient 120 0.70 1K 0.80 10K 0.90 100K 1.00 Temperature coefficient Ambient Temperature (℃) Coefficient ≦50 1.90 70 1.75 85 1.40 105 1.00 Page 88 Case Size / tanδ/ Max Ripple Current / Impedance CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 100KHz,105℃) / MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) 6.3 WV SPEC 10 ψDxL tanδ RC Z ψDxL tanδ RC Z 22 4x5.4 0.26 75 2.40 5x5.4 0.30 120 1.20 33 5x5.4 0.26 120 1.20 5x5.4 0.20 120 1.20 47 5x5.4 0.26 120 1.20 6.3x5.4 0.26 200 0.60 68 6.3x5.4 0.26 200 0.60 6.3x5.4 0.26 200 0.60 100 6.3x5.4 0.26 200 0.60 8*6.2 0.26 280 0.30 150 8x6.2 0.35 280 0.30 8x6.2 0.26 280 0.30 220 8x6.2 0.35 280 0.30 8x10.2 0.26 560 0.22 330 8x10.2 0.35 560 0.22 8x10.2 0.26 560 0.22 470 10x10.2 0.35 800 0.12 10x10.2 0.26 800 0.12 1000 10x10.2 0.35 800 0.12 10x10.2 0.26 800 0.12 μF WV SPEC 16 25 ψDxL tanδ RC Z ψDxL tanδ RC Z 4.7 4x5.4 0.26 75 2.40 4x5.4 0.14 75 2.40 6.8 4x5.4 0.26 75 2.40 4x5.4 0.14 75 2.40 10 4*5.4 0.16 75 2.40 5x5.4 0.14 120 1.20 22 5x5.4 0.16 120 1.20 6.3x5.4 0.14 200 0.60 33 6.3*5.4 0.16 200 0.60 6.3x5.4 0.14 200 0.60 47 6.3x5.4 0.16 200 0.60 8x6.2 0.16 280 0.30 68 8x6.2 0.20 280 0.30 8x10.2 0.16 560 0.22 100 8x6.2 0.20 280 0.30 8x10.2 0.16 560 0.22 150 8x10.2 0.20 560 0.22 10x10.2 0.16 800 0.12 220 8x10.2 0.20 560 0.22 10x10.2 0.16 800 0.12 330 10x10.2 0.20 800 0.12 470 10x10.2 0.20 800 0.12 μF Page 89