Sharma Electrolytic Capacitor GV Series ■ Features • Lifetime:85℃,2000hrs • Low profile vertical chip ■ • • • Recommended Applications AV(TV, Video, Audio) Monitor/Computer OA/HA/Communication Specifications Items Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range Characteristics ±20% (M) (120Hz,20℃) 4~50 VDC -40 ~ +85℃ 4 6.3 10 16 25 35 5 8 13 20 32 44 I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) WV SV Surge Voltage (V) (20℃) Leakage Current (Max) (20℃) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) 50 63 Shown in the table of standard rating Low Temperature Stability Impedance Ratio (Max) WV Z(120Hz) Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) Load Life 4 Capacitance Change Dissipation Factor Leakage Current 6.3 10 16 25 35 50 7 4 3 2 2 2 15 8 6 4 4 3 After applying rated voltage for 2000 hours at 85℃, the capacitor shall meet the following requirement. Within±20% of the initial value Not move than 200% of the specified value Not more than the specified value 2 3 After placed at 85℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Refer to JIS C 5101 Shelf Life Applicable standards Dimensions (mm) ψD L A H I W P K 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 +0.15 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 0.35 ( ) : Reference size Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 60 0.80 120 1.00 ≦50 1.36 1K 1.15 70 1.25 SECI Engineers & Buyers' Guide 10K~100K 1.25 85 1.00 Fax: (949)642-7327 Sharma Electrolytic Capacitor Case Size / tanδ/ Max Ripple Current / ESR CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 120Hz,85℃) / MAX EQUIVALENT SERIES RESISTANCE(ESR(Ω) / 120Hz,20℃) WV SPEC μF 4 ψDxL tanδ 6.3 RC ESR ψDxL tanδ 10 RC ESR ψDxL tanδ 16 RC ESR ψDxL tanδ RC ESR 4.7 4x5.4 0.16 20 45.1 10 0.16 0.26 0.16 0.26 0.16 0.16 28 27 39 45 66 70 21.1 4x5.4 0.30 28 18.0 7.33 4x5.4 5x5.4 5x5.4 0.30 0.20 0.30 29 43 43 12.0 8.03 8.46 4x5.4 4x5.4 5x5.4 5x5.4 6.3x5.4 6.3x5.4 71 3.44 6.3x5.4 0.26 70 3.44 6.3x5.4 0.20 70 2.65 0.35 250 2.11 8x6.2 0.26 250 1.56 8x10.2 0.20 280 1.20 8x6.2 0.35 300 1.40 8x10.2 0.26 330 1.04 10x10.2 0.20 380 0.803 470 8x10.2 0.35 380 0.987 10x10.2 0.26 400 0.733 10x10.2 0.20 420 0.564 1000 10x10.2 0.35 700 0.464 10x10.2 0.26 580 0.344 ESR ψDxL tanδ RC ESR 0.1 4x5.4 0.12 1 1593 0.22 4x5.4 0.12 2 723 0.33 4x5.4 0.12 3 482 0.47 4x5.4 0.12 5 338 1 4x5.4 0.12 10 159 22 4x5.4 0.35 19 21.1 4x5.4 0.26 20 15.6 33 4x5.4 0.35 26 14.0 5x5.4 0.26 22 10.4 47 4x5.4 0.35 34 9.87 5x5.4 0.26 46 100 5x5.4 0.35 61 4.64 6.3x5.4 0.26 220 6.3x5.4 0.35 82 2.11 8x6.2 330 WV SPEC μF 25 ψDxL tanδ 35 RC ESR ψDxL tanδ 50 RC 2.2 4x5.4 0.12 8 72.3 4x5.4 0.12 16 72.3 3.3 4x5.4 0.12 10 48.2 4x5.4 0.12 16 48.2 5x5.4 0.12 23 33.8 6.3x5.4 0.12 35 15.9 4.7 4x5.4 4x5.4 5x5.4 0.14 0.20 0.14 22 24 28 39.5 26.5 18.5 4x5.4 4x5.4 5x5.4 0.12 0.16 0.12 22 24 30 33.8 21.2 15.9 22 6.3x5.4 0.14 55 8.44 6.3x5.4 0.12 60 7.23 8x6.2 0.12 110 7.23 33 6.3x5.4 6.3x5.4 8x6.2 0.14 0.20 0.16 65 70 96 5.62 5.64 4.51 8x6.2 0.14 130 5.62 8x10.2 0.12 120 4.82 8x6.2 0.14 165 3.95 10x10.2 0.12 130 3.38 100 8x10.2 0.16 180 2.12 10x10.2 0.14 210 1.85 10x10.2 0.12 190 1.59 220 10x10.2 0.16 310 0.964 10x10.2 0.14 310 0.844 10 47 Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327 15.6 10.4 6.43 4.51