Sharma Electrolytic Capacitors EV Series ■ • • • • Features Lifetime:105℃,1000hrs Wide temperature range Low profile vertical chip Ultra low impedance Specifications ■ • • • • • Recommended Applications Monitor/Computer Battery charger DC/DC converter SMPS Noise filter Items Characteristics ±20% (M) (120Hz,20℃) 6.3~25 VDC -40 ~ +105℃ Capacitance Tolerance Rated Voltage Range (WV) Operating Temperature Range WV SV Surge Voltage (V) (20℃) 6.3 8 10 13 16 20 25 32 Leakage Current (Max) (20℃) I≦0.01CV or 3μA whichever is greater (After rated voltage applied for 2 minutes) I= Leakage Current (μA) C= Nominal Capacitance (μF) V= Rated Voltage (V) Dissipation Factor (Max) (tanδ) (120Hz ,20℃) Shown in the table of standard rating WV 6.3 Z(120Hz) Low Temperature Stability Impedance Ratio (Max) 10 16 25 Z(-25℃) / Z(20℃) Z(-40℃) / Z(20℃) 2 2 2 3 3 3 After applying rated voltage for 1000 hours at 105℃, the capacitor shall meet the following requirement. Capacitance Change Within±20% of the initial value Dissipation Factor Not more than 200% of the specified value Leakage Current Not more than the specified value After placed at 105℃without voltage applied for 1000 hours, the capacitor shall meet the same requirement as load life. Load Life Shelf Life 2 3 Refer to JIS C 5101 Applicable standards Dimensions (mm) ( ) : Reference size ψD L A H I W P K 4.0 5.4 4.3 5.5 Max 1.8 0.65±0.1 1.0±0.2 5.0 5.4 5.3 6.5 Max 2.2 0.65±0.1 1.5±0.2 0.35 -0.20 +0.15 0.35 -0.20 6.3 5.4 6.6 7.8 Max 2.6 0.65±0.1 1.8±0.2 8.0 6.2 8.3 9.5 Max 3.4 0.65±0.1 2.2±0.2 0.35 -0.20 +0.15 0.35 -0.20 8.0 10.2 8.3 10.0 Max 3.4 0.90±0.2 3.1±0.2 0.70±0.2 10.0 10.2 10.3 12.0 Max 3.5 0.90±0.2 4.6±0.2 0.70±0.2 +0.15 +0.15 Multiplier for Ripple Current Frequency coefficient Frequency (Hz) Coefficient 120 0.70 1K 0.80 10K 0.90 100K 1.00 Temperature coefficient Ambient Temperature (℃) Coefficient Tel: (949)642-7324 ≦50 1.90 70 1.75 SECI Engineers & Buyers' Guide 85 1.40 105 1.00 Fax: (949)642-7327 Sharma Electrolytic Capacitors Case Size / tanδ/ Max Ripple Current / Impedance CASE SIZE (ψDxL(mm)) / MAX DISSIPATION FACTOR (tanδ / 120Hz,20℃) / MAX PERMISSIBLE RIPPLE CURRENT (RC(mArms) / 100KHz,105℃) / MAX IMPEDANCE (Z(Ω) / 100KHz,20℃) 6.3 WV SPEC 10 ψDxL tanδ RC Z ψDxL tanδ RC Z 22 4x5.4 0.26 75 2.40 5x5.4 0.30 120 1.20 33 5x5.4 0.26 120 1.20 5x5.4 0.20 120 1.20 47 5x5.4 0.26 120 1.20 6.3x5.4 0.26 200 0.60 68 6.3x5.4 0.26 200 0.60 6.3x5.4 0.26 200 0.60 100 6.3x5.4 0.26 200 0.60 8*6.2 0.26 280 0.30 150 8x6.2 0.35 280 0.30 8x6.2 0.26 280 0.30 220 8x6.2 0.35 280 0.30 8x10.2 0.26 560 0.22 330 8x10.2 0.35 560 0.22 8x10.2 0.26 560 0.22 470 10x10.2 0.35 800 0.12 10x10.2 0.26 800 0.12 1000 10x10.2 0.35 800 0.12 10x10.2 0.26 800 0.12 μF WV SPEC 16 25 ψDxL tanδ RC Z ψDxL tanδ RC Z 4.7 4x5.4 0.26 75 2.40 4x5.4 0.14 75 2.40 6.8 4x5.4 0.26 75 2.40 4x5.4 0.14 75 2.40 10 4*5.4 0.16 75 2.40 5x5.4 0.14 120 1.20 22 5x5.4 0.16 120 1.20 6.3x5.4 0.14 200 0.60 33 6.3*5.4 0.16 200 0.60 6.3x5.4 0.14 200 0.60 47 6.3x5.4 0.16 200 0.60 8x6.2 0.16 280 0.30 68 8x6.2 0.20 280 0.30 8x10.2 0.16 560 0.22 100 8x6.2 0.20 280 0.30 8x10.2 0.16 560 0.22 150 8x10.2 0.20 560 0.22 10x10.2 0.16 800 0.12 220 8x10.2 0.20 560 0.22 10x10.2 0.16 800 0.12 330 10x10.2 0.20 800 0.12 470 10x10.2 0.20 800 0.12 μF Tel: (949)642-7324 SECI Engineers & Buyers' Guide Fax: (949)642-7327