RESISTORS CR THICK FILM CHIP RESISTOR SERIES Tolerance on Dimensions: INTRODUCTION The most popular type of chip resistor developed for surface mount technology. Ideal for general purpose applications. Unique construction and special termination techniques ensure high quality and reliability. Extremely compact size for miniaturization. FEATURES Excellent Long Term stability Available in Bulk and Tape & Reel packing. Available in Tolerances of ±5% (±1% On Request) Uniform body size ensures compatibility with High Speed automatic handling machines Compatible with flow and re-flow soldering methods ''L'' and ''W'': ± 0.25mm(0.01'') Case Dimensions Table • • • • • Dimensions in mm Case Code L W 0402 1.0 + 0.05 0.5 + 0.05 0603 1.6 + 0.1 0.8 + 0.15 0805 2.0 + 0.1 1.25 + 0.10 1206 3.2 + 0.15 1.6 + 0.15 2010 5.0 + 0.15 2.5 + 0.15 2510 6.3 + 0.15 3.2 + 0.15 SPECIFICATIONS Resistance Range: 10 Ohms to 1.0 M Ohms in E 24 Series. (Please also see Power Ratings Table. ) Rated Power: 1/16 to 1/4W. (Please also see Power Ratings Table. ) Rated Voltage: Rated Power x Nominal Resistance. Overload Voltage: Please refer to Rated Voltage Table. Temperature Coefficient: ± 250 ppm per °C. Temperature Range: -55°C to +125°C with derating above 70°C Tolerance: ± 5% ( ±1% On request.). T Max 0.35 + 0.05 0.45 + 0.10 0.55 + 0.10 0.55 + 0.10 0.55 + 0.15 0.55 + 0.15 e 0.25 + 0.15 0.30 + 0.1 0.35 + 0.2 0.55 + 0.25 0.45 + 0.2 0.5 + 0.2 Power Derating Curve Load Life: The component will be subjected to 1000 hours of testing at rated voltage and 70° C, with duty cycles of 1.5 hours ''on'' and 0.5 hours ''off''. After the test the Resistance change will remain within ±3% of the initial value + 0.1 Ohm for values above 1 M Ohm and 5% for values less than 1 M Ohm. Resistance to Soldering Heat: The component can be subjected to a soldering temperature of 270 °C for 10 seconds. After the test the Resistance change will remain within ±3% + 0.1 Ohms. Tape, Reel and Packing Specifications Reel Dimensions; Reel Dimensions in Millimeters A B C D E W t ø178 ±2.0 ø50 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.5 ø330 ±2.0 ø100 min. 13.0 ±0.5 21.0 ±0.8 2.0 ±0.8 8.8/12.8 ±1.5 2.0 ±0.6 Reel Dimensions in Inches A B C D E W t ø7 ±0.08 ø2.0 min. 5.0 ±0.02 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02 ø13 ±0.08 ø4.0 min. 5.0 ±0.3 0.83 ±0.03 0.08 ±0.3 0.35/0.50 ±0.06 0.08 ±0.02 Power Ratings Table SIZE 0402 0603 0805 1206 Rate Power Rate Current M a x i m u m at 70C of Jumper Working A Voltage Vw 0.063 25 0.063 (0.1) 0.1 (0.125) 2010 0.125 (0.25) 0.5 2512 1.0 1 50 150 2 200 S E C I Engineers & Buyers Guide M a x i m u m Temperature Combination Overload Coefficient Range of Voltage of Resistance F (+1%) Vo ppm/C 50 + 100 100 Ohms - 100 K + 200 100 K - 560 K 100 + 100 100 Ohms - 1 M Ohms + 200 1 Ohm - 9.1 Ohms 300 + 100 10 Ohms - 1 M Ohms (200) + 200 1 Ohm - 9.1 Ohms Resistors 400 + + + + + + 100 200 100 200 100 200 10 1 10 1 10 1 Ohms - 1 M Ohms Ohm - 9.1 Ohms Ohms - 1 M Ohms Ohm - 9.1 Ohms Ohms - 1 M Ohms Ohm - 9.1 Ohms of Resistance Tolerance J (+ 5%) Operating Temperature Range C 100 Ohms - 560 K 10 Ohms - 2.2 M Ohms 10 Ohms - 10 M Ohms 1 Ohm - 9.1 Ohms 10 Ohms - 10 M Ohms 1 Ohm - 9.1 Ohms 10 Ohms - 10 1 Ohm - 9.1 10 Ohms - 10 1 Ohm - 9.1 10 Ohms - 10 1 Ohm - 9.1 M Ohms Ohms M Ohms Ohms M Ohms Ohms -55 - + 125 RESISTORS Carrier Tape Dimensions; + 0.10 φ 1.5 - 0.0 ± 0.1 ± 0.1 2.0 4.0 E F W B A Tmax SIZE CODE A B W F E P ±0.2 mm or ±0.2 mm or ±0.3 mm or ±0.1 mm or ±0.1 mm or ±0.1 mm or ±0.012'' ±0.004'' ±0.004'' ±0.004'' ±0.008'' ±0.008'' 0402 0.65 (0.026") 0603 P 1.1 (0.043") 1.15 (0.045") Tmax 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 2mm (0.079") 0.43mm (0.018") 1.9mm (0.075") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.60mm (0.024") 0805 1.65 (0.065") 2.4mm (0.094") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.75mm (0.030") 1206 1.9 (0.075") 2010 2.8 (0.011") 3.5mm (0.138") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.75mm (0.030") 5.6mm (0.22") 2512 3.6 (0.142") 6.7mm (0.264") 12.0mm (0.472") 5.5mm (0.217") 1.75mm (0.069") 8mm (0.315") 0.20mm (0.080") 12.0mm (0.472") 5.5mm (0.217") 1.75mm (0.069") 4mm (0.157") 0.20mm (0.080") Packing Methods; PACKING Paper Taping Reel (R) Embossed Taping Reel (K) Bulk Cassette (K) 7" (178mm) 10" (254mm) 13" (330mm) 7" (178mm) Style CR02 CR03 CR05 CR06 CR20 CR25 (0402) (0603) (0805) (1206) (2010) (2512) 10,000 5,000 5,000 5,000 - 10,000 5,000 5,000 5,000 - 10,000 5,000 5,000 5,000 - PART NUMBERING CR Series: 02 = 0402 03 = 0603 05 = 0805 06 = 1206 20 = 2010 25 = 2512 3 or 4 Digit EIA Code. Tolerance: F = + 1% G = + 2% J = + 5% K = + 10% Circuits: 0 = NA Packaging: 1 = 5K Paper Taping 2 = 10K Paper Taping 3 = 20K Paper Taping 4 = 4K Plastic Taping 5 = Loose Packing A = 5K Cassette B = 10K Cassette C = 25K Cassette D = 50K Cassette Temp. Coefficient: 0 = + 100 ppm/C 1 = + 25 ppm/C 2 = + 50 ppm/C 3 = + 200 ppm/C 4 = + 400 ppm/C S E C I Engineers & Buyers Guide Resistors 4,000 4,000 50,000 25,000 10,000 5,000 -