SMT COMMON MODE CHOKES Military/Aerospace SLIC Series Enhanced SLIC platform for Military/Aerospace applications Solutions based on impedance, size and current Designed for DC/DC converters Wide variety of inductor sizes and current ratings available Dielectric strength: 1000VRMS Electrical Specifications @ 25°C — Operating Temperature -55°C to +130°C 1 Part 2,3 Number Inductance (mH ±35%) Irated (A) PL8200 0.47 PL8201 0.63 PL8202 DCR (MAX) (mΩ) Curve (see # below) Package Weight (Grams) Quantity In Tube Quantity In Reel 14.0 8 9 Big Foot 14.8 15 75 11.6 10 7 Big Foot 14.3 20 75 0.81 9.70 14 6 Big Foot 13.5 20 75 PL8203 0.53 7.20 15 8 HCCI-68 7.7 15 100 PL8204 0.59 5.60 21 7 LCCI-50 5.2 30 200 PL8205 0.77 4.70 40 6 LCCI-50 4.9 30 200 PL8206 0.22 3.30 60 5 LCCI-50 4.7 30 200 PL8207 1.32 3.30 60 4 LCCI-50 4.6 30 200 PL8208 1.47 2.80 80 3 LCCI-50 4.3 30 200 PL8209 0.88 1.63 110 2 Polecat 1.5 40 500 PL8210 1.17 1.22 200 1 Polecat 1.4 40 500 NOTE: 1. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 2. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PL8200 becomes PL8200T). Pulse complies to industry standard tape and reel specification EIA481. 3. To order RoHS compliant part, add “NL” to the part number (i.e. PL8200 becomes PL8200NL and PL8200T becomes PL8200NLT). Impedance Curves 15K 7.5K 12K 6.0K 3 5 4 Impedance (Ω) Impedance (Ω) 6 9K 1 2 6K 3K 7 4.5K 9 8 3.0K 1.5K 0 0 100 KHz 1 MHz 10 MHz Frequency 100 MHz 100 KHz 1 MHz 10 MHz 100 MHz Frequency USA 215 781 6400 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com M108.B (5/08) SMT COMMON MODE CHOKES Military/Aerospace SLIC Series Mechanicals Polecat LCCI-50 .500 12,70 .330 8,38 1 3 1 4X .500 12,70 4X 4 2 .175 4,45 .060 1,52 3 1 .410 10,41 2 4 1 4X 4 .410 10,41 HCCI-68 1.000 25,40 1 Big Foot 4 1.100 27,94 1 3 .620 15,75 4 3 1 2 4 1.000 25,40 Suggested Pad Layout .155 3,94 Suggested Pad Layout 1.220 MAX 30,99 .500 MAX 12,70 .395 MAX 10,03 1.110 MAX 28,19 .005/0,13 4 SURFACES Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .400 10,16 .600 15,24 1.000 MAX 25,40 2 1.000 ± .015 25,40 0,38 4 .770 MAX 19,56 R 3 2 4 2 .650 16,51 .650 MAX 16,51 .445 11,30 .005/0,13 4 SURFACES 4X .080 2,03 4X .300 7,62 3 .390 MAX 9,91 .330 8,38 3 .175 4,45 R Suggested Pad Layout .215 MAX 5,46 1 .060 1,52 2 Suggested Pad Layout .005/0,13 4 SURFACES 4X R 3 2 .445 11,30 .670 MAX 17,02 1.100 27,94 .006/0,15 4 SURFACES 1 3 2 4 Schematic For More Information: Pulse Worldwide Headquarters Pulse European Headquarters Pulse China Headquarters 2 Pearl Buck Court Bristol, PA 19007 U.S.A. www.pulseeng.com Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 215 781 6400 Fax: 215 781 6403 TEL: 49 7032 7806 0 FAX: 49 7032 7806 12 B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China 518057 TEL: 86 755 33966678 FAX: 86 755 33966700 Pulse North China Pulse South Asia Pulse North Asia Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. 32667 TEL: 86 21 32181071 FAX: 86 21 32181396 TEL: 65 6287 8998 FAX: 65 6280 0080 TEL: 886 3 4643715 FAX: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2008. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com M108.B (5/08)