NanoFilter Z-321NFW-50 xDSL over POTS In-Line Filter Description The Z-321NFW-50 is a small in-line filter designed to expedite the service delivery and improve the performance of digital subscriber line (DSL) services. This model filters all telephone sets, facsimile machines, answering machines, etc. individually or in groups. This in-line DSL filter design electronically isolates the high-speed DSL data streams from the voice band plain old telephone service (POTS) equipment. This design effectively blocks the DSL, and other radio frequencies from 25 kilohertz to 30 Megahertz. Features ● Data Protection - Isolates telephone impedances changes from DSL equipment ● Excellent DSL band attenuation that protects voice band equipment and prevents intermodulation distortion from degrading data rates ● Compatible with all major DSL standards including ADSL, ADSL2+, VDSL, and VDSL2 ● Voice Protection - Isolates DSL band frequencies from voice band equipment The in-line DSL nanoFILTER Applications The Z-321NFW-50 filters are used with other Z-BLOCKER filters distributed throughout the subscribers' premises to isolate all voice band equipment devices such as cordless telephones, answering machines, fax machines, dial-up modems, and television set-top boxes. The Z-321NFW-50 in-line DSL filter is one of many filters manufactured by Pulse for subscriber installed digital services within homes, offices, and hotels. Excelsus is the number one selling brand of DSL filters worldwide. ● Excellent longitudinal balance ● Compatible with Caller ID, facsimile and metallic loop testing ● RoHS compliant ● CE Certified ● Compliant with UL 60950, and FCC Part 68 RJ11-PLUG 6 5 4 LINE 1 3 2 1 RJ11-JACK 6 5 4 PHONE 3 2 1 RJ11-JACK 6 5 4 DSL 3 2 1 Z-321NFW-50 Block Schematic www.PulseElectronics.com EX151.A (2/11) NanoFilter Z-321NFW-50 xDSL over POTS In-Line Filter NanoFilter Z-321NFW-50 Specifications Line side differential input blocking impedance At 20 kHz At 30 kHz From 5 MHz to 10 MHz 1 kHz insertion loss between 600 Ω resistive 1 kHz/2.8 kHz slope between 600 Ω resistive Single filter With 3 filters DC resistance in Ohms Tip to Tip, and Ring to Ring Tip to Ring Longitudinal Balance per IEEE method From 200 - 1 kHz From 1 kHz - 3 kHz xDSL Insertion Loss (with ZDSL) 25 kHz 40 kHz 1.1 MHz 2.2 MHz 30 MHz Low pass roll off (slope) between 600 Ω and ADSL Transmission Unit - Remote Inter-Modulation Distortion First and Second order products Envelope Delay 300 Hz - 2800 Hz 600 Ω POTS Return Loss (with ZADSL) Single filter SRL Low ERL SRL High +2 bridged filters SRL Low ERL SRL High Connectors: RJ-11 Jacks and RJ11 Plug 50 micro-inches of gold plating over ≥100 micro-inches of nickel plating Compliant and listed with UL / CSA 60950, FCC CFR 47 Part 68 >2 k >3 k <0.2 dB <0.1 dB <1.1 dB <12 Ω >10 Ω >58 dB >53 dB ≥16 dB ≥25 dB ≥70 dB ≥70 dB ≥55 dB >26 dB >60 dB <100 µs >30 dB >18 dB >14 dB >18 dB >13 dB >8 dB Mechanical specifications Pulse Singapore - 135 Joo Seng Rd.#03-02PM Industrial Bldg.Singapore 368363 Tel: +65 6287 8998 Pulse Taiwan - 3F, #198, Zhongyuan Rd., Zhongli City Taoyuan, County 32068, Taiwan Tel: +886 3435 6768 Pulse US - 12220 World Trade Drive, San Diego, CA. 92128 Tel: +1 858 674 8100 www.pulseelectronics.com Specifications subject to change without notice. Excelsus is a registered trade mark of Pulse Electronics. © 2011 Pulse Electronics. EX151.A (2/11)