Data Sheet 1

AC and DC Axial Fans
Part Numbering Guide
Example: Part Number for DC Fan FAD1 - 04025CBMW11
F A D
1
-
040
25
C
B
M
W
1
1
-
SERIES
FAD: DC Fans
FAA: AC Fans up to 120mm
FKA: AC Fans 120mm and above
FAN TYPE
1: Axial3: Chip Cooler
2: Axial Capacitor Motor
4: Blower Fan
FAN SIZE (mm)
FRAME THICKNESS (mm)
VOLTAGE
A: 3.3 VDC
B: 5 VDC
C: 12 VDC
D: 24 VDC
E: 48 VDC
F: 60 VDC
N: 115 VAC
Q: 230 VAC
R: 115/230 VAC
BEARING
A: 1 Ball 1 Sleeve
C: Ceramic
B: 2 Ball
H: Hydro Dynamic
SPEED
A: Ultra low
L: Low
M: Medium
H: High
J: Ultra High
K: Super High
S: Sleeve
T: Top High
TERMINATION
W: PVC Wire
T: Terminal
FRAME & IMPELLER MATERIAL
1: Plastic/Plastic
3: Metal/Plastic
2: Plastic/Metal
4: Metal/Metal
FUNCTION
1: By Impedance
2: By IC 3: By IC with Alarm (RD)
4: By IC with Speed Sensor (FG)
5: By IC with Variable Speed Sensor (VS)
6: By Transistor with Speed Sensor (FG)
7: Two Speed
8: VS+FG
SPECIAL FEATURE
1
www.Qualtekusa.com
9: PWM Control
A: VS+RD
B: PWM+FG
C: RD+FG
D: IP55 E: IP67
F: By Thermal
99
AC and DC Axial Fans
Qualtek Electronics offers a complete line of low cost AC & DC axial fans produced in high tech facilities assuring high quality
standards with large production capabilities. Qualtek’s AC and DC fans are offered in a large variety of bearing types: 2-Ball, 1-Ball
1-Sleeve, Sleeve, and Hydro Dynamic with a wide range of speeds. AC fans are available from 115 to 230VAC and sizes from
60mm to 280mm, DC fans are available from 3.3-60VDC and sizes from 20mm to 254mm with a large array of functions and special
features.
AC Fan Specifications
Dimensions
(mm)
Dimensions
(in)
Air Flow
(CFM)
Voltage
(VAC)
Noise Level
(dB/A)
FAA1-08025
80 x 80 x 25
3.15 x 1.00
15 - 21
115 - 230
18.3 - 27.8
TÜV
FAA1-08038
80 x 80 x 38
3.15 x 1.50
22 - 29.6
115 - 230
25.3 - 31.6
TÜV
FAA1-09225
92 x 92 x 25
3.62 x 1.00
25 - 34
115 - 230
21.1 - 30.1
TÜV
FAA1-12025
120 x 120 x 25
4.70 x 1.00
65 - 71
115 - 230
38.7 - 44.1
TÜV
FAA1-12038-A
120 x 120 x 38
4.70 x 1.50
53.5 - 107
115 - 230
30.5 - 48.1
TÜV
FKA1-17251
172 x 150 x 51
6.7 x 5.9 x 2.0
140 - 189
115 - 230
50.3 - 57.7
TÜV
FKA2-17251
172 x 150 x 51
6.7 x 5.9 x 2.0
155 - 210
115 - 230
56.6 - 65.0
TÜV
FKA2-17689
176 x 176 x 89
6.90 x 3.50
330-380
115 - 230
66.4 - 70.0
TÜV
FKA2-18065
180 x 180 x 65
7.00 x 2.60
350-410
115 - 230
70.0 - 72.0
TÜV
FKA2-20572
205 x 205 x 72
8.00 x 2.70
600-665
115 - 230
72.0 - 75.4
TÜV
FKA2-25489
254 x 89 (round)
10.00 x 3.50
450-630
115 - 230
55.6 - 66.0
TÜV
FKA2-28089
280 x 280 x 89
11.00 x 3.50
625 - 1400
115 - 230
60.0 - 78.0
TÜV
FKA2-28089-A
280 x 280 x 89
11.00 x 3.50
115 - 320
625 - 740
60.0 - 78.0
TÜV
Series
Approvals
DC Fan Specifications
Dimensions
(mm)
Dimensions
(in)
Air Flow
(CFM)
Voltage
(VDC)
Noise Level
(dB/A)
FAD1-02510
25 x 25 x 10
1.00 x 0.39
1.6 - 2.1
5, 12
12.5 - 23.0
TÜV
FAD1-03010
30 x 30 x 10
1.18 x 0.39
2.2 - 4.0
5, 12
19.0 - 34.0
TÜV
FAD1-04010
40 x 40 x 10
1.57 x 0.39
3.3 - 7.0
5, 12, 24
14.0 - 29.0
TÜV
FAD1-04020
40 x 40 x 20
1.57 x 0.79
4.4 - 9.57
5, 12, 24
17.5 - 37.5
TÜV
Series
Approvals
FAD1-05010
50 x 50 x 10
2.00 x 0.39
8.0 - 10.3
5, 12, 24
20.0 - 27.5
TÜV
FAD1-06020
60 x 60 x 20
2.36 x 0.79
10.7 - 23.5
5, 12, 24
18.4 - 39.0
TÜV
FAD1-06025
60 x 60 x 25
2.36 x 1.00
13.2 - 31.4
5, 12, 24
18.1 - 42.9
TÜV
FAD1-08015
80 x 80 x 15
3.15 x 0.59
21.8 - 34.3
5, 12, 24
18.8 - 38.1
TÜV
FAD1-08025
80 x 80 x 25
3.15 x 1.00
20.5 - 43.2
12, 24
16.5 - 37.4
TÜV
FAD1-08025 IC
80 x 80 x 25
3.15 x 1.00
21.6 - 56.7
12, 24
14.0 - 43.4
TÜV
FAD1-08032
80 x 80 x 32
3.15 x 1.25
39.5 - 55.3
12, 24, 48
35.5 - 44.0
TÜV
FAD1-08038
80 x 80 x 38
3.15 x 1.50
30.6 - 62.1
12, 24
25.5 - 43.7
TÜV
FAD1-09225
92 x 92 x 25
3.62 x 1.00
30.3 - 61.9
12, 24
19.1 - 42.2
TÜV
92 x 92 x 25
3.62 x 1.00
30.3 - 61.9
12, 24, 48
19.1 - 42.2
TÜV
FAD1-12025
120 x 120 x 25
4.70 x 1.00
57.2 - 98.9
12, 24, 48
27.2 - 43.3
TÜV
FAD1-12032
120 x 120 x 32
4.70 x 1.25
59.4 - 133.4
12, 24, 48
26.9 - 48.4
TÜV
FAD1-12038
120 x 120 x 38
4.70 x 1.50
57.2 - 120.1
12, 24, 48
28.4 - 48.0
TÜV
FAD1-12738
127 x 127 x 38
5.00 x 1.50
107.0 - 242.0
12, 24, 48
41.0 - 64.5
TÜV
FAD1-09225 IC
www.Qualtekusa.com
2
Aluminum Fan Filters - 06 Series
These tested and proven filters provide maximum airflow with effective filtering. Mill and stainless steel finishes are offered to
enhance EMI/RFI shielding as well as an anodized finish for aesthetic purposes. The tightly woven corrugated mesh screen is
encased in a formed aluminum frame built for ruggedness and durability. The filters are designed to fit any standard 60mm - 2 1/2”,
80mm - 3 1/8”, 92mm - 3 5/8” and 120mm - 4 1/2” tubeaxial fan. The units are easily washed in a solvent or degreaser and can be
mounted directly to the fan or to a panel.
60 mm
Part
Number
Use With
Fan Size
mm
Size (in)
Finish
in.
Height
(sq.)
Thickness
Mounting
Hole Diameter
Mounting Hole
Center
60 mm - 2 1/2”
80 mm
06250-B
06250-M
06250-SS
60
60
60
2 1/2
2 1/2
2 1/2
Anodized (Black)
Mill (No Finish)
Stainless Steel
2.36
2.36
2.36
.138
.138
.138
.170 (4 Places)
.170 (4 Places)
.170 (4 Places)
1.97
1.97
1.97
80
80
80
3 1/8
3 1/8
3 1/8
Anodized (Black)
Mill (No Finish)
Stainless Steel
3.30
3.30
3.30
.138
.138
.138
.170 (4 Places)
.170 (4 Places)
.170 (4 Places)
2.81
2.81
2.81
92
92
92
3 5/8
3 5/8
3 5/8
Anodized (Black)
Mill (No Finish)
Stainless Steel
3.62
3.62
3.62
.138
.138
.138
.170 (4 Places)
.170 (4 Places)
.170 (4 Places)
3.25
3.25
3.25
4 1/2
4 1/2
4 1/2
Anodized (Black)
Mill (No Finish)
Stainless Steel
4.67
4.67
4.67
.138
.138
.138
.170 (4 Places)
.170 (4 Places)
.170 (4 Places)
4.13
4.13
4.13
80 mm - 3 1/8”
06325-B
06325-M
06325-SS
92 mm
92 mm - 3 5/8”
06362-B
06362-M
06362-SS
120 mm - 4 1/2”
120 mm
06450-B
06450-M
06450-SS
120
120
120
Fan Power Cords - 07 Series
Fan-S offers four configurations of high quality fan power cords designed to be used with tubeaxial fans with a strain relief for added
safety. UL and cUL rated 10 Amps/125 Volt with special configurations such as daisy chain, special length and color are available.
Part
Number
A
C
E
G
B
D
F
H
Cord Length
mm
Style
Figure
Cordage
07100-12
07100-24
07100-36
07100-40
07100-50
07100-60
07100-80
305
610
915
1016
1270
1524
2034
12
24
36
40
50
60
80
Straight
Straight
Straight
Straight
Straight
Straight
Straight
A
A
A
A
A
A
A
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07100-SP024
07100-SP036
07100-SP072
610
915
1829
24
36
72
Straight
Straight
Straight
B
B
B
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07145-12
07145-24
07145-36
07145-40
07145-50
07145-60
07145-80
305
610
915
1016
1270
1524
2034
12
24
36
40
50
60
80
45°
45°
45°
45°
45°
45°
45°
C
C
C
C
C
C
C
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07145-SP024
07145-SP036
07145-SP072
610
915
1829
24
36
72
45°
45°
45°
D
D
D
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07190-12
07190-24
07190-36
07190-40
07190-50
07190-60
07190-80
305
610
915
1016
1270
1524
2034
12
24
36
40
50
60
80
90°
90°
90°
90°
90°
90°
90°
E
E
E
E
E
E
E
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07190-SP024
07190-SP036
07190-SP072
610
915
1829
24
36
72
90°
90°
90°
F
F
F
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07199-12
07199-24
07199-36
07199-40
07199-50
07199-60
07199-80
305
610
915
1016
1270
1524
2034
12
24
36
40
50
60
80
T-Type
T-Type
T-Type
T-Type
T-Type
T-Type
T-Type
G
G
G
G
G
G
G
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
07199-SP024
07199-SP036
07199-SP072
610
915
1829
24
36
72
T-Type
T-Type
T-Type
H
H
H
SPT-1(18/2)
SPT-1(18/2)
SPT-1(18/2)
www.Qualtekusa.com
3
in.
Wire Form Fan Guards - 08 Series
All wire form fan guards are produced in our ISO 9001 certified facility to assure compliance to our rigid specifications. Available for
fan sizes 25mm to 254mm with a high quality nickel chrome finish as our standard. Also available in black finish & stainless steel.
08245 (25mm)
08346 (30mm)
08149 (40mm)
08148 (50mm)
08147 (60mm)
08212 (60mm)
08138 (80mm)
08132 (80mm)
08156 (80mm)
08172 (80mm)
08133 (92mm)
08134 (92mm)
08174 (92mm)
08189 (92mm)
08128 (120mm)
08129 (120mm)
08130 (120mm)
08139 (120mm)
08141 (120mm)
08146 (120mm)
08170 (120mm)
08213 (120mm)
08135 (127mm)
08150 (127mm)
08125 (150mm)
08126(150mm)
08151 (150mm)
08152 (150mm)
08190 (176mm)
08127 (254mm)
08155 (254mm)
08243-SS (254mm)
Part *
Number
08245
08346
08149
08148
08147
08212
08132
08138
08156
08172
08133
08134
08174
08189
08128
08129
08130
08139
08141
08146**
08170
08213
08135
08150
08125
08126
08151
08152
08190**
08127
08155
08243-SS
For Use With
Fan Size
Rib Material Dia.
Ring Material
Dia.
Mounting Hole
Centers
Outside Ring
Dia.
Thickness
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
25
30
40
50
60
60
80
80
80
80
92
92
92
92
120
120
120
120
120
120
120
120
127
127
150
150
150
150
176
254
254
254
1
1
1 1/2
2
2 1/2
2 1/2
3 1/8
3 1/8
3 1/8
3 1/8
3 5/8
3 5/8
3 5/8
3 5/8
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
5
5
6
6
6
6
7
10
10
10
1.50
1.60
1.60
1.60
1.60
1.60
1.80
1.80
1.80
1.60
1.80
1.80
1.60
1.80
1.80/2.30
2.30
2.30
2.30
2.00
1.60
1.80
2.30
2.30
2.30
2.30
2.30
1.60
1.60
2.00
2.30
2.00
1.60
.059
.063
.063
.063
.063
.063
.071
.071
.071
.063
.071
.071
.063
.071
.071/.091
.091
.091
.091
.080
.063
.071
.091
.091
.091
.091
.091
.063
.063
.080
.091
.080
.063
1.50
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.80
1.60
1.60
1.60
1.60
1.60
1.80
1.80
1.80
1.80
1.60
1.60
1.80
1.80
1.80
1.80
1.80
1.80
1.60
1.60
1.60
2.30
2.00
1.60
.059
.063
.063
.063
.063
.063
.063
.063
.071
.063
.063
.063
.063
.063
.071
.071
.071
.071
.063
.063
.071
.071
.071
.071
.071
.071
.063
.063
.063
.091
.080
.063
20.0
24.0
32.0
42.0
50.0
50.0
71.4
100.9
71.4
71.4
82.4
82.5
82.4
82.4
104.8
104.8
104.8
104.8
104.8
104.8
104.8
104.8
113.3
113.3
162.0
162.0
161.9
161.9
152.6
174.0
174.0
208.0
0.79
0.94
1.26
1.65
1.97
1.97
2.81
3.97
2.81
2.81
3.25
3.25
3.24
3.24
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.46
4.46
6.38
6.38
6.38
6.38
6.00
6.85
6.85
8.19
24.2
21.8
29.5
41.1
53.0
53.0
76.2
76.2
77.2
76.2
89.4
89.8
89.8
89.8
115.6
115.6
115.6
115.6
117.3
107.9
115.6
106.4
115.2
124.5
154.4
154.4
158.8
158.8
160.9
222.3
225.3
180.8
.953
.860
1.16
1.62
2.05
2.09
3.00
3.00
3.04
3.00
3.52
3.54
3.54
3.54
4.55
4.55
4.55
4.55
4.62
4.25
4.55
4.19
4.54
4.90
6.08
6.08
6.25
6.25
6.33
8.75
8.87
7.12
3.00
4.80
4.80
4.80
5.20
5.20
4.95
4.95
5.08
4.95
4.95
4.95
5.00
3.10
5.90
3.75
5.66
5.66
5.20
3.10
5.66
5.66
6.00
5.90
6.45
6.45
6.10
6.10
16.31
6.35
5.80
4.00
.120
.189
.189
.189
.205
.205
.195
.195
.200
.195
.197
.195
.195
.122
.232
.148
.223
.223
.205
.122
.223
.223
.236
.232
.254
.254
.240
.240
.642
.250
.228
.157
* Note: Add to part number for: Black (-02), Stainless Steel (-SS) (example: 08149-02 Black 40mm Fan Guard.)
** Does not meet 1/4” max. ring spacing.
www.Qualtekusa.com
4
Plastic Fan Guards - 09 Series
The 09 Series low cost plastic fan guards produced with UL 94-V0 material are designed for tubeaxial fans with design considerations
given to maximize airflow with reduced noise levels. Space saving models (Thin) designed for 80 & 120 mm.
09150-G (40mm)
09250-G (60mm)
09252-G (80mm)
09080-G (80mm)
Thin
09081-G (80mm)
09325-G (80mm)
09362-G (92mm)
09363-G (92mm)
09120-G (120mm)
09121-G (120mm)
09122-G (120mm)
Thin
09123-G (120mm)
09450-G (120mm)
09650-G (150mm)
09651-G (150mm)
Part
Number
09150-G
09250-G
09252-G
09080-G
09081-G
09325-G
09362-G
09363-G
09120-G
09121-G
09122-G
09123-G
09450-G
09650-G
09651-G
For Use With
Fan Size
Mounting Hole
Centers
mm
in.
mm
40
60
60
80
80
80
92
92
120
120
120
120
120
150
150
1 1/2
2 1/2
2 1/2
3 1/8
3 1/8
3 1/8
3 5/8
3 5/8
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
6.00
6.00
32.0
50.0
50.0
71.4
71.5
71.4
82.6
82.5
104.8
104.8
104.8
105.0
104.7
162.0
162.0
Mounting Hole Dia.
4 Places
Width
Thickness
in.
mm
in.
mm
in.
mm
in.
1.26
1.97
1.97
2.81
2.81
2.81
3.25
3.25
4.13
4.13
4.13
4.13
4.12
6.38
6.38
4.3
4.6
4.4
4.1
4.0
3.8
3.8
4.4
4.6
4.6
4.6
4.4
4.5
5.0
5.0
0.17
0.18
0.17
0.16
0.16
0.15
0.15
0.17
0.18
0.18
0.18
0.17
0.18
0.20(2)
0.20(2)
40
60
60
80
80
80
92
92
120
120
120
120
118
176
172
1.57
2.36
2.36
3.15
3.15
3.15
3.62
3.62
4.72
4.72
4.72
4.72
4.65
6.93
6.77
4.75
6.30
7.00
3.00
7.00
6.60
6.60
7.00
6.60
6.60
2.50
7.00
7.10
8.20
7.50
0.187
0.250
0.275
0.118
0.276
0.260
0.260
0.276
0.260
0.260
0.100
0.276
0.279
0.320
0.295
Fan Silencer and Accessories
Noise is the number one problem for axial fans that are used for electronic cooling. It is generally caused by vibration between the
housing and fan. To prevent this problem, we have developed a method that eliminates noise and makes mounting effortless. With
the patented rubber elastic sleeves, you can fasten axial fans without screws quickly and safely with four mushroom formed pegs
on a mounting plate or housing wall.
QLM Fan Vibration Sleeve
A
Part
Number
QLM-40-20-10
QLM-60-30-10
QLM-80-40-10
QLM-92-40-10
QLM-119-40-10
B
Panel Thickness
Inch
mm
Inch
mm
Inch
mm
Inch
mm
1.693
2.520
3.307
3.819
4.921
43
64
84
97
125
1.574
2.362
3.150
3.622
4.685
40
60
80
92
119
.080
.080
.157
.157
.157
2.0
2.0
4.0
4.0
4.0
.030-.049
.030-.049
.030-.049
.030-.049
.030-.049
.75-1.25
.75-1.25
.75-1.25
.75-1.25
.75-1.25
EMI Filter Shield for QLM Sleeves
A
G
B
Plastic Fan Guards for QLM Sleeves
F
B
G
Inch
mm
Inch
mm
Inch
mm
Part
Number
Inch
mm
Inch
mm
Inch
mm
QSB-40-01
QSB-60-01
QSB-80-01
QSB-92-01
QSB-119-01
1.654
2.441
3.228
3.700
4.764
42
62
82
94
121
1.260
1.969
2.815
3.248
4.133
32.0
50.0
71.5
82.5
105.0
.008
.008
.008
.008
.012
0.2
0.2
0.2
0.2
0.3
QSG-40-02
QSG-60-02
QSG-80-02
QSG-92-02
QSG-119-02
1.811
2.598
3.503
3.976
5.039
46.0
66.0
89.0
101.0
128.0
1.279
1.969
2.815
3.248
4.133
32.5
50.0
71.5
82.5
105.0
.098
.098
.098
.098
.118
2.5
2.5
2.5
2.5
3.0
Rivets
Filter Media for QLM Sleeves
A
B
D
Part
Number
Inch
mm
Inch
mm
Inch
mm
QF-40-01
QF-60-01
QF-80-01
QF-92-01
QF-119-01
1.575
2.362
3.150
3.622
4.685
40.0
60.0
80.0
92.0
119.0
1.26
1.969
2.815
3.248
4.133
32.0
50.0
71.5
82.5
105.0
.197
.197
.197
.197
.197
5.0
5.0
5.0
5.0
5.0
www.Qualtekusa.com
5
A
Part
Number
Part
Number
QLN-36-01-100
With the specially designed rivets, metal fan
guard grills can be attached into the holes of the
mushroom formed pegs from the fan sleeves.
Plastic Fan Filter Assemblies - 09 Series
Fan-S offers a unique fan filter package consisting of a guard, foam filter media and media retainer for the removal of dust and
contaminating particles with quick and simple installation.
Part
Number
Fig. A
Description
Mounting
Hole
Centers
Mounting Hole
Diameter
4 Places
Width
4 Places
Thickness
mm
in.
mm
in.
mm
in.
mm
in.
32.00
32.00
32.00
32.00
32.00
-
1.26
1.26
1.26
1.26
1.26
-
4.30
4.30
4.30
4.30
4.30
-
.17
.17
.17
.17
.17
-
40.0
40.0
40.0
40.0
36.4
36.4
36.4
36.4
40.0
36.4
1.57
1.57
1.57
1.57
1.43
1.43
1.43
1.43
1.57
1.43
50.00
50.00
50.00
50.00
50.00
-
1.97
1.97
1.97
1.97
1.97
-
4.60
4.60
4.60
4.60
4.60
-
.18
.18
.18
.18
.18
-
60.0
60.0
60.0
60.0
56.6
56.6
56.6
56.6
60.0
56.4
2.36
2.36
2.36
2.36
2.23
2.23
2.23
2.23
2.36
2.22
6.30
6.30
6.30
6.30
2.77
2.77
2.77
2.77
6.35
3.00
.250
.250
.250
.250
.109
.109
.109
.109
.250
.118
71.37
71.37
71.37
71.37
71.37
-
2.81
2.81
2.81
2.81
2.81
-
3.81
3.81
3.81
3.81
3.81
.15
.15
.15
.15
.15
-
83.3
83.3
83.3
83.3
77.7
77.7
77.7
77.7
80.0
83.6
3.28
3.28
3.28
3.28
3.06
3.06
3.06
3.06
3.15
3.29
9.90
9.90
9.90
9.90
3.30
3.30
3.30
3.30
6.60
9.90
.390
.390
.390
.390
.130
.130
.130
.130
.260
.390
82.60
82.60
82.60
82.60
82.60
-
3.25
3.25
3.25
3.25
3.25
-
3.80
3.80
3.80
3.80
3.80
-
.15
.15
.15
.15
.15
-
96.3
96.3
96.3
96.3
89.8
89.8
89.8
89.8
92.2
96.5
3.79
3.79
3.79
3.79
3.54
3.54
3.54
3.54
3.63
3.80
10.10
10.10
10.10
10.10
3.30
3.30
3.30
3.30
6.60
10.10
.390
.390
.390
.390
.130
.130
.130
.130
.260
.398
104.70
104.70
104.70
104.70
104.70
-
4.12
4.12
4.12
4.12
4.12
-
4.45
4.45
4.45
4.45
4.45
-
.18
.18
.18
.18
.18
-
125.2
125.2
125.2
125.2
115.6
115.6
115.6
115.6
118.3
125.2
4.92
4.92
4.92
4.92
4.55
4.55
4.55
4.55
4.66
4.93
10.60
10.60
10.60
10.60
3.30
3.30
3.30
3.30
7.10
10.60
.420
.420
.420
.420
.130
.130
.130
.130
.280
.420
161.50
161.50
161.50
161.50
161.50
-
6.36
6.36
6.36
6.36
6.36
-
5.00(2)
5.00(2)
5.00(2)
5.00(2)
5.00(2)
-
.20(2)
.20(2)
.20(2)
.20(2)
.20(2)
-
176.00
176.00
176.00
176.00
149.86
149.86
149.86
149.86
176.00
150.00
6.93
6.93
6.93
6.93
5.90
5.90
5.90
5.90
6.93
5.91
8.20
8.20
8.20
8.20
3.30
3.30
3.30
3.30
8.20
4.50
.323
.323
.323
.323
.130
.130
.130
.130
.323
.180
40 mm - 1.50” Fig. A
Retainer
Foam Media
09150-F/30
09150-F/45
09150-F/60
09150-F/100
09150-M/30*
09150-M/45*
09150-M/60*
09150-M/100*
09150-G
09150-R
4.75
4.75
4.75
4.75
2.29
2.29
2.29
2.29
4.75
0.90
.187
.187
.187
.187
.090
.090
.090
.090
.180
.035
60 mm - 2.50” Fig. A
09250-F/30
09250-F/45
09250-F/60
09250-F/100
09250-M/30*
09250-M/45*
09250-M/60*
09250-M/100*
09250-G
09250-R
Guard
Guard, Retainer, Media (30 PPI)**
Guard, Retainer, Media (45 PPI)**
Guard, Retainer, Media (60 PPI)**
Guard, Retainer, Media (100 PPI)**
Foam Media (30 PPI)**
Foam Media (45 PPI)**
Foam Media (60 PPI)**
Foam Media (100 PPI)**
Guard Only
Retainer Only
Guard, Retainer, Media (30 PPI)**
Guard, Retainer, Media (45 PPI)**
Guard, Retainer, Media (60 PPI)**
Guard, Retainer, Media (100 PPI)**
Foam Media (30 PPI)**
Foam Media (45 PPI)**
Foam Media (60 PPI)**
Foam Media (100 PPI)**
Guard Only
Retainer Only
80 mm - 3.13” Fig. B
Fig. B
Guard
09325-F/30
09325-F/45
09325-F/60
09325-F/100
09325-M/30*
09325-M/45*
09325-M/60*
09325-M/100*
09325-G
09325-R
Guard, Retainer, Media (30 PPI)**
Guard, Retainer, Media (45 PPI)**
Guard, Retainer, Media (60 PPI)**
Guard, Retainer, Media (100 PPI)**
Foam Media (30 PPI)**
Foam Media (45 PPI)**
Foam Media (60 PPI)**
Foam Media (100 PPI)**
Guard Only
Retainer Only
92 mm - 3.62” Fig. B
Foam Media
Retainer
09362-F/30
09362-F/45
09362-F/60
09362-F/100
09362-M/30*
09362-M/45*
09362-M/60*
09362-M/100*
09362-G
09362-R
Guard, Retainer, Media (30 PPI)**
Guard, Retainer, Media (45 PPI)**
Guard, Retainer, Media (60 PPI)**
Guard, Retainer, Media (100 PPI)**
Foam Media (30 PPI)**
Foam Media (45 PPI)**
Foam Media (60 PPI)**
Foam Media (100 PPI)**
Guard Only
Retainer Only
120 mm - 4.50” Fig. B
09450-F/30
09450-F/45
09450-F/60
09450-F/100
09450-M/30*
09450-M/45*
09450-M/60*
09450-M/100*
09450-G
09450-R
Fig. C
Guard, Retainer, Media (30 PPI)**
Guard, Retainer, Media (45 PPI)**
Guard, Retainer, Media (60 PPI)**
Guard, Retainer, Media (100 PPI)**
Foam Media (30 PPI)**
Foam Media (45 PPI)**
Foam Media (60 PPI)**
Foam Media (100 PPI)**
Guard Only
Retainer Only
150 mm - 6.00” Fig. C
Retainer
Foam Media
Guard
09650-F/30
09650-F/45
09650-F/60
09650-F/100
09650-M/30*
09650-M/45*
09650-M/60*
09650-M/100*
09650-G
09650-R
Guard, Retainer, Media (30 PPI)**
Guard, Retainer, Media (45 PPI)**
Guard, Retainer, Media (60 PPI)**
Guard, Retainer, Media (100 PPI)**
Foam Media (30 PPI)**
Foam Media (45 PPI)**
Foam Media (60 PPI)**
Foam Media (100 PPI)**
Guard Only
Retainer Only
* Each package contains 5 pieces
** Pores per Inch (PPI)
www.Qualtekusa.com
6
Product Profile
Fan-S Division
AC & DC Fans and Accessories
Low cost, high tech AC & DC axial fans with sizes ranging from 25mm - 280 mm, DC voltages from 3.3VDC - 60VDC and AC voltages from 115VAC - 230VAC and many
special features such as IP55 and IP67 rated, speed sensors, alarm functions and much more upon request. Each fan is offered with a variety of bearing types : 2-ball,
1-ball 1-sleeve, sleeve only, and our newly developed hydro dynamic bearing with better performance than sleeve and lower cost than 2 ball bearings. Every fan is
available with a wide range of speeds from ultra low to super high speed.
Our fan accessories are famous worldwide and consist of wire form and plastic guards, plastic air filters, aluminum and stainless steel air filters, fan cords, and our
patented noise reduction vibration sleeves.
Primary Power Components Division
AC Receptacles
A complete line of inlets, outlets, multifunction modules with major international approval marks thus assuring high safety standards and help customers comply with
international regulations. Modern production methods enable us to manufacture cost-effective and reliable components. A full range of products are maintained in
inventory for quick on-time deliveries. Custom designs are available upon request.
Circuit Breakers
QLB and QMB series are compact and cost effective thermal circuit breakers with a wide range of amp ratings from 3A - 40A and offered in single pole and push-to-reset
with safety agency certifications. We offer a large variety of bushing types, terminals, name plates, button colors and printing with custom configurations available.
EMI Filters
EMI/RFI power line filters are designed to meet most international safety agency requirements. These filters help customers meet FCC and VDE emission standards.
Our line consists of many standard configurations such as block type, filter with power line connector, and various filters with multifunctional modules. Custom designs
are available upon request.
Power Cords
A large selection of North American and International Power Cords that have been designed to comply with North American and international safety agency
regulations to insure safe and reliable products. Offered in a wide selection of plugs and connectors available in various cable insulations, voltage ratings,
colors, lengths, shielding and a full range of hospital grade certified power cords. Custom configurations and strain reliefs are available upon request.
Power Supplies
A full range of low cost, high reliability and energy saving switch mode AC/DC power supplies consisting of enclosed, open frame models and waterproof LED
drivers; our enclosed versions are rated from 15W - 600W, open frame from 20W - 125W and LED drivers with constant current 25W - 200W and constant voltage
25W - 300W. All models have universal voltage input and a variety of output voltages ranging from 3.3V - 445V and some models include power factor correction
to increase efficiency and reduce power losses. All of our power supplies meet or exceed the RoHS EU and the Chinese directives and are certified with worldwide
safety agencies to ensure a safe and reliable product.
Wire Management, Cable Assemblies & Interconnect Division
Cable Assemblies
We offer a wide selection of standard and custom cable assemblies, specializing in DVI, HDMI, USB and Fiber Optic and also producing flat ribbon cables, monitor cables,
networking cables and an extensive offering of custom cable assemblies and wire harnesses.
Cable Ties & Accessories
Our low cost, high reliability cable nylon ties are available in a variety of styles including miniature, intermediate, standard and heavy duty. Specialty cable ties include
releasable pawl type, stainless steel ball lock, head mount, push mount, marker ties, double loop, beaded and 4-way cable tie mounts. Cable ties are available in various
material types including ultraviolet, heat stabilized, fire retardant and also are available in a range of colors. Custom designs and colors available upon request.
Heat Shrink Products
Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high voltage insulation, molded parts and end caps, cold shrink, wide
range of shrink tubing kits and heat shrinkable cable and wire identification tubing.
International Procurement Services Division
Procurement Services
With over 30 years of global business experience, Qualtek’s IPS division provides a complete range of services from component sourcing to complete turnkey projects.
With our extensive knowledge of the major global manufacturing regions, this enables us to have access to the newest technology, highest quality, and the most cost
effective production methods.
7610 Jenther Dr. * Mentor, Ohio 44060 * USA
Telephone: 1.440.951.3300 * Fax: 1.440.951.7252
E-mail: [email protected]
Web: www.Qualtekusa.com
FAN-S 0300