PLL400-875Y

PLL400-875Y
PLL400-875Y
5V NARROWBAND PHASELOCKED LOOP
5V NARROWBAND PHASE-LOCKED LOOP
Package: PLL400, 15.24mm x 15.24mm x 3mm
PLL Synthesizer Block Diagram
Features



Low Phase Noise / Fast Settling
Time
RF Feedback
SPI Bus Compatible
PLL IC
Frequency: 750MHz to
1000MHz

Resonator: Aircoil

PCB: FR4 and S1170

Reference In
Data, Clock, Enable, LD
Charge Pump
V Tune
Package Size: 15.24mm x
15.24mm x 3mm (0.6in x 0.6in x
0.118in)
RF Output
Loop Filter
VCO
Applications

Cellular Infrastructure

RFID

General Wireless
VCO and PLL IC Vcc
Functional Block Diagram
Product Description
RFMD® offers complete Phase Locked Modules (PLLs) integrating a PLL IC, a VCO,
loop filter components, and buffer amplifiers. RFMD has a broad selection of oscillator topologies, resonator technologies, supply voltages, and substrate materials
available, allowing us to provide customers with a PLL solution that meets the specific cost, performance, and size requirements for their applications.
Ordering Information
PLL400-875Y
Contact us at 1-480-756-6070
Optimum Technology Matching® Applied
GaAs HBT
GaAs MESFET
InGaP HBT
SiGe BiCMOS
Si BiCMOS
SiGe HBT
GaAs pHEMT
Si CMOS
Si BJT

GaN HEMT
BiFET HBT
LDMOS
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
DS120109
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
1 of 3
PLL400-875Y
Absolute Maximum Ratings
Parameter
Rating
Unit
Operating Ambient Temperature
-40 to +85
°C
Storage Temperature
-55 to +125
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice.
RoHS (Restriction of Hazardous Substances): Compliant per EU Directive
2002/95/EC.
Parameter
Min.
Specification
Typ.
Max.
875
1000
Unit
Condition
Overall
Frequency Range
750
Step Size
250
Settling Time
Output Power
-3
Output Phase Noise
MHz
kHz
5
10
ms
0
3
dBm
-80
-74
dBc/Hz
To within 1.0kHz
1kHz
-80
-74
dBc/Hz
10kHz
-111
-105
dBc/Hz
100kHz
Spurious Product
-70
-60
dBc
250kHz
Reference Feedthrough
-80
-60
dBc
Harmonic Suppression
Reference Oscillator Signal
-15
-8
dBc
2nd harmonic
-18
-10
dBc
3rd harmonic
10
3
Output Impedance
5
MHz
Frequency
Vp-p
Amplitude
-145
dBc/Hz
100
k
50

Phase noise - 1kHz
Input impedance
Power Supply
Operating Voltage
4.75
Supply Current
5
5.25
V
30
35
mA
PLL Synthesizer Programming
Refer to Application Note 109, Option 100.
2 of 3
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
DS120109
PLL400-875Y
Package Drawing & Pin Outs
15.24mm x 15.24mm x 3mm (0.6in x 0.6in x 0.118in)
DS120109
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or [email protected].
3 of 3