RFMD Datasheet Template

RFPA2025
RFPA2025
Integrated Power Amplifier Module
2110MHz to 2170MHz
The RFPA2025 is a three-stage power amplifier (PA) designed for
Small Cell Base Stations. Its broadband quadrature design has
excellent output return loss and load tolerance. When used with
DPD, the RFPA2025 delivers up to 28dBm LTE Downlink (CFR
8dB) with ACLR < -50dBc.
VCC1
GND
NC
GND
16
15
14
13
GND 1
Package: Module, 16-pin,
5.0mm x 5.0mm x 1.175mm
Features
■
POUT = 28dBm, 25% PAE, with 5V,
20MHz LTE DL, CFR 8dB
■
ACLR < -50dBc with DPD
■
31dB Gain
■
Integrated Matching to 50Ω
■
Integrated DC Block Capacitors
■
Broadband Quadrature Design
■
Excellent Output Return Loss
■
Covers 3GPP Downlink in Bands:
4(1)
■
VSWR Tolerant, Load Insensitive
12 VCC2
RFIN 2
Split
Combine
IMN
OMN
11 NC
GND 3
10 GND
Bias
Circuitry
GND 4
Applications
■
Small Cell Base Stations
■
Data Cards with Terminals
■
Customer Premise Equipment
9 RFOUT
5
6
7
8
VBIAS
VEN
GND
GND
Functional Block Diagram
Ordering Information
RFPA2025SQ
Sample bag with 25 pieces
RFPA2025SR
7" Reel with 100 pieces
RFPA2025TR13
13" Reel with 2500 pieces
RFPA2025PCK-410
2110MHz to 2170MHz PCBA with 5-piece sample
bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
®
DS150616
®
RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 10
Absolute Maximum Ratings
Parameter
Rating
Unit
6
VDC
Enable Control Logic, VEN
+2.2
VDC
Maximum CW RF Input Power into 50Ω Load (VCC = 5.25V)
+30
dBm
Operating Case Temperature
-40 to +85
°C
Storage Temperature Range
-40 to +150
°C
DC Supply Voltage, VCC (POUT < 29dBm, VSWR < 6:1)
Moisture Sensitivity Level (260° JEDEC J-STD-020)
MSL3
-4
dBm
ESD Rating, All Pins, HBM, JESD22-A114
1000
V
ESD Rating, All Pins, CDM, JESD22-C101
1000
V
Modulated (LTE-20MHz) Input Power 6:1 Output VSWR (VCC = 5.25)
Caution! ESD sensitive device.
RFMD Green: RoHS status based on EU
Directive 2011/65/EU (at time of this
document revision), halogen free per IEC
61249-2-21, < 1000ppm each of antimony
trioxide in polymeric materials and red
phosphorus as a flame retardant, and
<2% antimony in solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Recommended Operating Condition
Specification
Parameter
Min
Operating Temperature Range
Typ
-40
Operating Junction Temperature
4.75
Power Supply VCC1, VCC2, VBIAS
5
Unit
Max
+85
°C
165
°C
5.25
V
Nominal Operating Parameters
Specification
Parameter
Unit
Min
Typ
Condition
Max
General Performance
Operating Frequency Range
2110
2170
MHz
Power Supply VCC1, VCC2
5
V
Bias Supply VBIAS
5
V
VEN Range (Logic Low)
0
0.4
V
VEN Range (Logic High)
1.35
2.0
V
0.2
mA
VEN = 1.8V
135
mA
DC only, VCC1 = VCC2 = VBIAS = 5V, VEN = 1.8V
7
mA
DC only, VEN = 1.8V
µs
DC only, time from VEN = high to stable idle current (90% of steady state
value)
VEN Enable Current
Total Idle Current (ICQ)
VBIAS Current
DC Enable Time
7
RF Rise / Fall Time
2
µs
POUT ≤ 28dBm, 90% of target, DC settled prior to RF
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
®
DS150616
®
RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
2 of 10
RFPA2025
Specification
Parameter
Unit
Min
Typ
Condition
Max
Unless Otherwise Specified; Temp = +25°C, VCC = +5.0V,
VEN = +1.8V, POUT = 28dBm, 2110MHz < F < 2170MHz, 50Ω
system, 20MHz LTE DL with CFR 8dB
Electrical Performance:
Band 4
Gain
31
dB
ACLR1 – Adjacent Channel
-34
dBc
Without DPD
ACLR2 – Alternate Channel
-50
dBc
Without DPD
ACLR1_DPD
-50.5
dBc
With DPD
ACLR2_DPD
-58
dBc
With DPD
PA Current Drain
500
mA
PAE
25.2
%
With DPD
Input Return Loss
-20
dB
Small signal S11, no external matching
Output Return Loss
-13
dB
Small signal S22, no external matching
Harmonics 2f0
-40
dBm
Harmonics 3f0
-38
dBm
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 10
RFPA2025
Typical Performance: VCC = VBIAS = 5V, VEN = 1.8V unless otherwise noted
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 10
RFPA2025
Typical Performance: VCC = VBIAS = 5V, VEN = 1.8V unless otherwise noted
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 10
RFPA2025
Evaluation Board Schematic: 2110MHz to 2170MHz (Band 4) Application Circuit
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
6 of 10
RFPA2025
Evaluation Board Bill of Materials (BOM) 2110MHz to 2170MHz (B4) Application Circuit
Description
Reference
Designator
Manufacturer
Manufacturer's P/N
Viasystems Technologies Corp
PA2025-410(B)
U1
RFMD
RFPA2025
C2, C5, C9, C12
Murata Electronics
GRM155R71H102KA01D
CAP, 4.7µF, 20%, 10V, X7R, 1206
C6-C7
Taiyo Yuden (USA), Inc.
CE LMK316 B7475ML-T
CAP, 0.1µF, 10%, 16V, X7R, 0402
C8
Murata Electronics
GRM155R71C104KA88D
CAP, 22pF, 5%, 50V, C0G, 0402
C11
Murata Electronics
GRM1555C1H220JA01D
RES, 0 OHM, 0402 KAMAYA
R1
Kamaya, Inc
RES, 1K, 5%, 1/16W, 0402
R2
Kamaya, Inc
RMC1/16S-102JTH
J1-J2
Gigalane Co., LTD.
PA-S05-008
CONN, HDR, ST, PLRZD, 4-PIN, 0.100”
P1
ITW Pancon
MPSS100-4-C
CONN, HDR, ST, PLRZD, 3-PIN, 0.100”
P2
ITW Pancon
MPSS100-3-C
RFPA2025 Evaluation Board
2110MHz to 2170MHz Integrated PA Module
CAP, 1000pF, 10%, 50V, X7R, 0402
CONN, MSA, END, LAUNCH, 0.068”
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
RMC1/16SJPTH
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
7 of 10
RFPA2025
Assembly Drawing
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 10
RFPA2025
Pin Names and Descriptions
Pin
Name
Description
1
GND
Ground connection
2
RFIN
RF Input; Internally matched to 50Ω
3
GND
Ground connection
4
GND
Ground connection
5
VBIAS
6
VEN
Enable
7
GND
Ground connection
8
GND
Ground connection
9
RFOUT
10
GND
11
NC
12
VCC2
Output stage collector supply voltage
13
GND
Ground connection
14
NC
15
GND
Ground connection
16
VCC1
Drive stage collector supply voltage
PKG BASE
GND
Ground connection; The back side of the package should be connected to the ground plane though as short of
a connection as possible, PCB vias under the device are recommended.
Input Bias Voltage; This pin requires a regulated supply to maintain nominal bias current
RF Output; Internally matched to 50Ω
Ground connection
Not connected
Not connected , OPEN Circuit in the module
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
9 of 10
RFPA2025
Package Outline (Dimensions in millimeters)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS150616
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
10 of 10