RFSW6132 RFSW6132 SP3T Symmetric Switch, 10MHz to 6000MHz The RFSW6132 is a GaAs pHEMT single-pole three-throw (SP3T) switch designed for use in cellular, 3G, LTE, and other high performance communications systems. It offers a symmetric topology with excellent linearity and power handling capability. The RFSW6132 is 3V and 5V positive logic compatible. V3 RF3 7 8 6 1 RFC 5 4 Features ■ 10MHz to 6000MHz Operation ■ Symmetric SP3T ■ Low Loss: 0.5dB at 2GHz Typical ■ Isolation: 27dB at 2GHz Typical ■ High IP3: 56dBm ■ P0.1dB: 31dBm (5V, 2.2GHz) ■ Positive Logic Control ■ 3V and 5V Logic Compatible V2 RF2 3 RF1 Package: DFN, 8-pin, 2.0mm x 2.0mm Applications ■ Cellular, 3G, LTE Infrastructure ■ Automotive ■ Wireless Backhaul ■ High Performance Communication Systems ■ GMSK, QPSK, DQPSK, QAM Modulation V1 Functional Block Diagram Ordering Information RFSW6132SQ Sample bag with 25 pieces RFSW6132SR 7" Reel with 100 pieces RFSW6132TR7 7" Reel with 2500 pieces RFSW6132PCK-410 10MHz to 6000MHz PCBA with 5-piece sample bag RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. ® DS131125 ® RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 1 of 8 RFSW6132 Absolute Maximum Ratings Parameter Rating Unit Control Voltage (V1, V2, V3) 6 V Maximum CW Input Power for 3V Control 31 dBm Maximum CW Input Power for 5V Control 32 dBm Operating Temperature Range -40 to +85 °C Storage Temperature Range -40 to +150 °C +150 °C Class 1A (250) V Maximum Junction Temperature ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level MSL3 Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Specification Parameter Unit Min Typ Condition Max General Performance TA=25°C, 100pF EVB DC blocks, 3V unless otherwise noted. 0.5 dB 1GHz dB 2GHz 0.7 dB 4GHz 0.8 dB 5.85GHz 31 dB 1GHz 27 dB 2GHz 22 dB 4GHz 22 dB 5.85GHz 32 dB 1GHz 27 dB 2GHz 25 dB 4GHz 25 dB 5.85GHz >20 dB 1GHz >20 dB 2GHz >18 dB 4GHz >15 dB 5.85GHz 27 dBm 3.0V, 2.2GHz 31 dBm 5.0V, 2.2GHz Input IP3 (900MHz) 53 dBm 17dBm input power/tone, 1MHz spacing, 3.3V TON, TOFF 25 ns 50% VCC to 10/90% RF, +10dBm input power TRISE, TFALL 20 Ns 10/90% RF, 10dBm input power 0.5 Insertion Loss (RFC to RF1/RF2/RF3) 25 0.7 Isolation (RFC to RF1/RF2/RF3) Isolation (RF1-RF2, RF1-RF3, RF2-RF3) Return Loss (On-state) IP0.1dB RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 8 RFSW6132 Specification Parameter Min Typ Unit Condition Max Power Supply “High” Control Voltage 1.8 5 V Logic “high” “Low” Control Voltage 0 0.2 V Logic “low” 2.5 µA 5V Control Current 0.7 Note: User should optimize DC blocking capacitors for the desired frequency of operation. For positive logic control, DC blocking capacitors are required on all RF ports. RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 8 RFSW6132 Typical Performance: RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 8 RFSW6132 Evaluation Board Schematic Evaluation Board Bill of Materials (BOM) Description Reference Designator Manufacturer RFSW6132 Evaluation Board RFSW6132, SP3T Switch Manufacturer's P/N RFSW6132-410(A) U1 RFMD RFSW6132 CAP, 100pF, 5%, 50V, C0G, 0402 C1-C4 Murata Electronics GRM1555C1H101JD01E RES, 1K, 5%, 1/6W, 0402 R1-R3 Kamaya, Inc. RMC1/16S-102JTH CONN, SMA, END, LAUNCH, 26.5GHz, 0.068 J1-J4 Gigalane PSF-S01-008 CONN, HDR, ST, PLRZD, 4-PIN, 0.100” PDC1 ITW Pancon MPSS100-4-C Do Not Place C5-C7, L1-L4 RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 8 RFSW6132 Evaluation Board Assembly Drawing RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 8 RFSW6132 Pin Names and Descriptions Pin Name Description 1 RFC RF Common Port; external DC block required 2 NC No internal connection 3 V1 Control 1 4 RF1 RF Port 1; external DC block required 5 RF2 RF Port 2; external DC block required 6 V2 Control 2 7 V3 Control 3 8 RF3 RF Port 3; external DC block required EPAD GND RF and DC Ground; must be soldered to EVB ground plane over a bed of vias Note: RFMD recommends that the NC pins be grounded on the EVB to maximize isolation. Truth Table Control Logic RF Path Configuration V1 V2 V3 RFC-RF1 RFC-RF2 RFC-RF3 1 0 0 On Off Off 0 1 0 Off On Off 0 0 1 Off Off On 1 = 1.8V to 5.0V 0 = 0V to 0.2V RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 8 RFSW6132 Package Pin Out Package Outline Drawing (Dimensions in millimeters) RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS131125 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 8 of 8