UMX-1132-D16-G UMX-1132D16-GUltraLow Noise Coaxial resonator oscillators ULTRA-LOW NOISE COAXIAL RESONATOR OSCILLATORS Package: D16, 12.7mm x 12.7mm x 5.6mm VCC Features Ultra-Linear Tuning / Ultra-Low Phase Noise Frequency: 1990MHz to 2050MHz Resonator: Ceramic PCB: Rogers Tank Circuit Package Size: 12.7mm x 12.7mm x 5.6mm (0.5in x 0.5in x 0.22in) Active Circuit Resonator VTUNE RF Output Voltage Controlled Oscillator (VCO) Applications Point-to-Point Radio Functional Block Diagram DRO/YIG Multiplied Replacements Product Description Low Phase Noise Applications SAW VCO Replacement This VCO series features ultra-low phase noise, lower phase transients, lower harmonics, and lower pushing and pulling without any performance penalties typically associated with high technology designs. Ordering Information UMX-1132-D16-G Contact us at 1-480-756-6070 Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT BiFET HBT LDMOS RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc. DS110901 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 3 UMX-1132-D16-G Absolute Maximum Ratings Parameter Rating Unit Operating Ambient Temperature[1] -40 to +85 °C Storage Temperature -55 to +125 °C [1] Frequency drift: 4MHz typical (either extreme). Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2002/95/EC. Parameter Min. Specification Typ. Max. Unit Condition Overall Frequency Range Tuning Voltage 1990 2050 1 9 Tuning Sensitivity Output Power 13 3 5 VDC MHz/V 7 2.5 Output Phase Noise MHz dBm dBm At VT =0 -88 -83 dBc/Hz 1kHz -117 -112 dBc/Hz 10kHz -137 -132 dBc/Hz 100kHz -157 -152 dBc/Hz 1000kHz -164 -155 dBc/Hz 10000kHz Second Harmonic -15 -10 dBc Frequency Pulling 0.2 0.5 MHz p-p Tuning Port Capacitance 94 Modulation Bandwidth Frequency Pushing 1000 0.1 At 12dBr, all phases pF kHz 0.5 3dB BW MHz/V Power Supply Operating Voltage 10 V Supply Current 28 mA 2 of 3 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS110901 UMX-1132-D16-G Package Drawing & Pin Outs 12.7mm x 12.7mm x 5.6mm (0.5in x 0.5in x 0.22in) DS110901 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 3