PLL400-915AY PLL400-915AY 5V NARROWBAND PHASELOCKED LOOP 5V NARROWBAND PHASE-LOCKED LOOP Package: PLL400, 15.24mm x 15.24mm x 3mm PLL Synthesizer Block Diagram Features Low Phase Noise / Fast Settling Time SPI Bus Compatible Frequency: 902MHz to 928MHz Resonator: Aircoil PCB: FR4 and S1170 Reference In Data, Clock, Enable, LD RF Feedback PLL IC Charge Pump Package Size: 15.24mm x 15.24mm x 3mm (0.6in x 0.6in x 0.118in) VCO and PLL IC Vcc V Tune RF Output Loop Filter VCO Applications Cellular Infrastructure RFID General Wireless Functional Block Diagram Product Description RFMD® offers complete Phase Locked Modules (PLLs) integrating a PLL IC, a VCO, loop filter components, and buffer amplifiers. RFMD has a broad selection of oscillator topologies, resonator technologies, supply voltages, and substrate materials available, allowing us to provide customers with a PLL solution that meets the specific cost, performance, and size requirements for their applications. Ordering Information PLL400-915AY Contact us at 1-480-756-6070 Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT BiFET HBT LDMOS RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. DS120109 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 3 PLL400-915AY Absolute Maximum Ratings Parameter Rating Unit Operating Ambient Temperature -40 to +85 °C Storage Temperature -55 to +125 °C Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2002/95/EC. Parameter Min. Specification Typ. Max. 915 928 Unit Condition Overall Frequency Range 902 Step Size 200 Settling Time Output Power 0 Output Phase Noise MHz kHz 5 10 ms 3 6 dBm -87 -81 dBc/Hz To within 1.0kHz 1kHz -111 -105 dBc/Hz 10kHz -133 -127 dBc/Hz 100kHz Spurious Product -80 -70 dBc 200kHz Reference Feedthrough -80 -70 dBc Harmonic Suppression Reference Oscillator Signal -15 -10 dBc 2nd harmonic -20 -10 dBc 3rd harmonic 10 3 Output Impedance 5 MHz Frequency Vp-p Amplitude -145 dBc/Hz 100 k 50 Phase noise - 1kHz Input impedance Power Supply Operating Voltage 4.75 Supply Current 5 5.25 V 22 30 mA PLL Synthesizer Programming Refer to Application Note 113, Option 20700. 2 of 3 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS120109 PLL400-915AY Package Drawing & Pin Outs 15.24mm x 15.24mm x 3mm (0.6in x 0.6in x 0.118in) DS120109 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 3