DRAFT DRAFT RFRP2241 5MHZ TO 100MHZ 30DB REVERSE HYBRID (LOW CURRENT, LOW NOISE) The RFRP2241 is a hybrid reverse amplifier. The part employs a silicon die. It has extremely low distortion and superior return loss performance. The part also provides optimal reliability with low noise and is well suited for 5MHz to 100MHz CATV amplifiers for reverse channel systems. Package: SOT-115J Features ■ Excellent Linearity ■ Superior Return Loss Performance ■ Extremely Low Distortion ■ Optimal Reliability ■ Low Noise ■ Unconditionally Stable Under All Terminations ■ 30.1dB Typical Gain at 100MHz ■ 135mA Max. at 24VDC Applications Functional Block Diagram ■ Broadband/CATV ■ 5MHz to 100MHz CATV Amplifier For Reverse Channel Systems Ordering Information RFRP2241 Box with 50 pieces DRAFT RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. ® ® DRAFT DS130906 RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 1 of 4 DRAFT DRAFT RFRP2241 Absolute Maximum Ratings Parameter Rating Unit 65 dBmV RF Input Voltage (single tone) DC Supply Over-Voltage (5 minutes) 30 V Storage Temperature -40 to +100 °C Operating Mounting Base Temperature -30 to +100 °C Caution! ESD sensitive device. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2011/65/EU. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Specification Parameter Unit Min Typ VB= 24V; TMB=30°C; ZS=ZL=75Ω General Performance Operating Frequency Range Condition Max 5 29.5 30.0 29.3 30.1 -0.2 0.1 100 MHz 30.5 dB f=5MHz dB f=100MHz 0.5 dB f=5MHz to 100MHz ±0.3 dB f=5MHz to 100MHz Power Gain Slope [1] Flatness of Frequency Response Input Return Loss -20 dB f=5MHz to 100MHz Output Return Loss -20 dB f=5MHz to 100MHz f=100MHz Noise Figure Total Current Consumption (DC) 125.0 2.5 3.0 dB 130.0 135.0 mA VB= 24V; TMB=30°C; ZS=ZL=75Ω Distortion data 5MHz to 100MHz CTB XMOD CSO DRAFT -66 -57 -70 -64 dBc 7 ch. flat; VO=50dBmV [2] -61 dBc 12 ch. flat; VO=50dBmV [3] -55 dBc 7 ch. flat; VO=50dBmV [2] -51 dBc 12 ch. flat; VO=50dBmV [3] -68 dBc 7 ch. flat; VO=50dBmV [2] -68 dBc 12 ch. flat; VO=50dBmV [3] RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DRAFT DS130906 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 3 DRAFT DRAFT RFRP2241 Notes: 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 7 channels, NTSC frequency raster: T7-T13 (7.0MHz to 43MHz), +50dBmV flat output level. 3. 12 channels NTSC frequency raster: T7-T13 (7.0MHz to 43MHz), 2-6 (55.25MHz to 83.25MHz), +50dBmV flat output level. Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA. Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested. DRAFT RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DRAFT DS130906 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3 DRAFT DRAFT RFRP2241 Package Outline and Pin Out DRAFT RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DRAFT DS130906 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 3