Standard ICs 6-channel inverter BA6266 / BA6266F The BA6266 and BA6266F are driver ICs featuring high output voltage capability and high-current open collector output, and having six built-in inverter buffer circuits. The open collector output enables “AND” ties. In addition, clamp diodes are connected to all inputs, minimizing error caused by ringing and other factors. These inverters feature a high output pressure withstand resistance of 30V, as well as a large output power supply (sink current) of 40mA, making them suitable for use in LED drivers and interfaces with other elements. Applications •General-purpose digital equipment •1)Features High output current. (I 3) “AND” ties enabled. 4) Wide range of operating temperatures. OL = 40mA) 2) High output voltage. (VO = 30V) •Block diagram VCC 6A 6Y 5A 5Y 4A 4Y 14 13 12 11 10 9 8 ∗ ∗ ∗ ∗ ∗ ∗ 1 2 3 4 5 6 7 1A 1Y 2A 2Y 3A 3Y GND ∗ Open collector •Absolute maximum ratings (Ta = 25°C) Parameter Symbol Power supply voltage Power dissipation VCC BA6266 BA6266F Limits Unit 7 V 600∗1 Pd 550∗2 Operating temperature Topr Storage temperature 0 ~ + 70 mW °C Tstg – 55 ~ + 125 °C Input voltage VI 5.5 V Output voltage VO 33 V ∗1 Reduced by 6.0mW for each increase in Ta of 1°C over 25°C. ∗2 Reduced by 5.5mW for each increase in Ta of 1°C over 25°C. 1 Standard ICs BA6266 / BA6266F •Recommended operating conditions (Ta = 25°C, V CC Parameter Symbol Min. Power supply voltage VCC Output voltage VO = 5V) Typ. Max. Unit 4.75 5 5.25 V — — — 30 V When output is "H" •Electrical characteristics (unless otherwise noted, Ta = 25°C, V CC Parameter Symbol Min. Typ. Conditions = 5V) Max. Unit Conditions Input high level voltage VIH 2 — — V — Input low level voltage VIL — — 0.8 V — Output saturation voltage 1 VOL1 — — 0.4 V VCC = 4.75V, IOL = 16mA Output saturation voltage 2 VOL2 — — 0.7 V VCC = 4.75V, IOL = 40mA •Internal equivalent circuit diagram •Truth table VCC 9kΩ 1.4kΩ 1.6kΩ Y Input A Output A Y H L L H 2kΩ 100Ω 1kΩ GND (Resistance values are typical values.) Fig.1 •Application examples LED driver 1 LED driver 2 Relay driver AND tie Fig.2 2 Standard ICs BA6266 / BA6266F •Electrical characteristics curves (mA) 500 50 BA6266 BA6266F 400 OUTPUT CURRENT : IOL POWER DISSIPATION : Pd (mW) 600 300 200 100 –25 0 25 50 75 100 When all outputs are on Ta = 70°C 40 BA6266 30 20 BA6266F 10 0 125 AMBIENT TEMPERATURE : Ta (°C) 20 40 60 80 100 DUTY CYCLE (%) Fig.3 Power dissipation vs. ambient temperature Fig.4 Output conditions diagram •External dimensions (Units: mm) BA6266 BA6266F 8.7 ± 0.2 14 8 1 7 1.5 ± 0.1 7.62 0.3 ± 0.1 2.54 1.27 0.15 ± 0.1 4.4 ± 0.2 0.51Min. 7 0.11 3.2 ± 0.2 4.25 ± 0.3 1 6.2 ± 0.3 8 6.5 ± 0.3 19.4 ± 0.3 14 0.4 ± 0.1 0.3Min. 0.5 ± 0.1 0° ~ 15° 0.15 DIP14 SOP14 3