Voltage Controlled Oscillator

Plug-In
POS-1060+
POS-1060
Voltage Controlled Oscillator
Linear Tuning
750 to 1060 MHz
Features
• wide tuning range
• 3 dB modulation bandwidth 1 MHz, typ.
• low phase noise
• hermetically sealed
CASE STYLE: A06
PRICE: $ 14.95 ea QTY (5-49)
Applications
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• cellular up & down converters
• CATV distribution set top converters
• agile communications systems
• test instruments
Electrical Specifications
FREQUENCY POWER TUNING
(MHz)
OUTPUT VOLTAGE
(dBm)
(V)
PHASE NOISE
(dBc/Hz)
SSB at offset frequencies:
Typ.
Min.
Max.
Typ.
Min.
Max.
1
kHz
750
1060
+12.0
1
20
-65
PULLING PUSHING
TUNING
HARMONICS
3 dB
pk-pk
(MHz/V) SENSITIVITY
(dBc)
MODULATION
@ 12 dBr
(MHz/V)
BANDWIDTH
(MHz)
(MHz)
10
kHz
100
kHz
1
MHz
Typ.
Typ.
Typ.
Typ.
Max.
-90
-112
-132
50
3.0
18-32
-11
—
Pin Connections
DC
OPERATING
POWER
Typ.
Vcc
(volts)
Current
(mA)
Max.
1.0
8
30
Maximum Ratings
RF OUT
2
Operating Temperature
VCC
1
Storage Temperature
8
V-TUNE
-55°C to 85°C
-55°C to 100°C
Absolute Max. Supply Voltage (Vcc)
+10V
GROUND
3,4,5,6,7
Absolute Max. Tuning Voltage (Vtune)
+22V
CASE GROUND
3,4,5,6,7
all specifications: 50 ohm system
Permanent damage may occur if any of these limits are exceeded.
Outline Drawing
Outline Dimensions ( inch
mm )
A
.770
19.558
B
.800
20.32
C
.285
7.239
D
.310
7.874
E
.370
9.398
F
.400
10.16
G
.200
5.08
H
.20
5.08
J
K
.14
.031
3.556 0.7874
wt
grams
5.2
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
REV. H
M98898
POS-1060
SK/TD/CP/AM
120622
Page 1 of 2
POS-1060+
POS-1060
Performance Data & Curves
1000
80
800
60
600
40
400
20
-55°C
+25°C
+85°C
T SENS.
200
0
0
4
8
12
Tuning Voltage (V)
16
20
0.00
2.00
4.00
6.00
8.00
23.35
19.99
20.73
24.32
25.69
10.00
12.00
14.00
16.00
18.00
20.00
POS-1060
Harmonics Level
Harmonics (dBc)
F2
F3
F4
-10
-20
-30
-40
-50
0
4
8
12
Tuning Voltage (V)
16
20
-55°C
667.98
705.71
749.19
786.40
841.58
+25°C
POWER OUTPUT (dBm)
+85°C
660.15652.46
697.66690.63
741.35732.14
777.56770.01
833.68826.97
-55°C
+25°C
10.85
10.98
11.56
12.04
12.45
10.25
10.90
11.00
12.05
12.15
26.61 901.15 893.70 884.16
27.64 959.47 949.31 938.49
27.49 1002.41 994.54 986.85
23.00 1052.01 1046.381037.38
25.88 1092.75 1083.051067.83
12.85
12.63
12.48
12.20
11.49
12.52
12.33
12.54
12.00
11.64
12.11
12.14
12.51
11.60
11.86
14.94 1138.66 1124.151108.01
12.03
11.92
11.49
HARMONICS (dBc)
F2
F3
POS-1060
Power Output
+85°C
11.14
10.98
12.00
11.90
12.52
V
TUNE
0
FREQUENCY (MHz)
15
-55°C
Output Power (dBm)
100
Tuning Sensitivity
(MHz/V)
Frequency (MHz)
1200
TUNING
SENS.
(MHz/V)
+25°C
+85°C
14
13
12
11
10
0
4
8
12
Tuning Voltage (V)
16
20
FREQ. PUSHING
(MHz/V)
F4
0.00
2.00
4.00
6.00
8.00
-26.45-28.96-36.75
-21.14-34.52-28.82
-17.10-35.34-27.13
-13.96-27.35-26.30
-12.30-23.93-26.93
1.45
1.60
1.73
1.97
2.04
10.00
12.00
14.00
16.00
18.00
-10.84-24.58-22.23
-9.60-19.71-20.91
-10.84-17.99-19.54
-10.78-14.74-19.27
-14.89-15.81-22.11
2.21
2.46
2.69
2.79
4.59
20.00
-20.96-14.73-18.43
3.52
POS-1060
Frequency Pushing
(Supply Voltage 8V)
5.0
Pushing (MHz/V)
V
TUNE
POS-1060
Frequency and Tuning Sensitivity (at +25°C)
4.0
3.0
2.0
1.0
0.0
0
4
8
12
Tuning Voltage (V)
16
20
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 2 of 2