Voltage Controlled Oscillator

Plug-In
POS-75P+
POS-75P
Voltage Controlled Oscillator
5V Tuning for PLL IC’s
35 to 43 MHz
Features
• 5V tuning voltage range
• low phase noise
• hermetically sealed
CASE STYLE: A06
PRICE: $12.95 ea. QTY (5-49)
Applications
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• PLL circuitry
• measurement instrumentation
• synthesizers
Electrical Specifications
FREQUENCY POWER TUNING
(MHz)
OUTPUT VOLTAGE
(dBm)
(V)
PHASE NOISE
(dBc/Hz)
SSB at offset frequencies:
Typ.
Min.
Max.
Typ.
Min.
Max.
1
kHz
35
43
9
0.5
5.0
-91
PULLING PUSHING
TUNING
HARMONICS
3 dB
pk-pk
(MHz/V) SENSITIVITY
(dBc)
MODULATION
@ 12 dBr
(MHz/V)
BANDWIDTH
(MHz)
(MHz)
10
kHz
100
kHz
1
MHz
Typ.
Typ.
Typ.
Typ.
Max.
-113
-135
-151
0.15
0.11
2.5-4.0
-25
-20
Pin Connections
DC
OPERATING
POWER
Typ.
Vcc
(volts)
Current
(mA)
Max.
0.1
12
20
Maximum Ratings
RF OUT
2
Operating Temperature
VCC
1
Storage Temperature
8
Absolute Max. Supply Voltage (Vcc)
V-TUNE
-55°C to 85°C
-55°C to 100°C
GROUND
3,4,5,6,7
Absolute Max. Tuning Voltage (Vtune)
CASE GROUND
3,4,5,6,7
all specifications: 50 ohm system
+16V
+7V
Permanent damage may occur if any of these limits are exceeded.
Outline Drawing
Outline Dimensions ( inch
mm )
A
.770
19.558
B
.800
20.32
C
.285
7.239
D
.310
7.874
E
.370
9.398
F
.400
10.16
G
.200
5.08
H
.20
5.08
J
K
.14
.031
3.556 0.7874
wt
grams
5.2
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
REV. H
M111708
POS-75P
FL/TD/CP/AM
091223
Page 1 of 2
POS-75P+
POS-75P
Performance Data & Curves
60
12
+25°C
+85°C
T SENS.
10
40
8
30
6
20
4
10
2
0
1
2
3
Tuning Voltage (V)
4
Tuning Sensitivity
(MHz/V)
Frequency (MHz)
-55°C
50
5
POS-75P
Harmonics Level
Harmonics (dBc)
F2
F3
F4
-10
-20
-30
-40
-50
0
1
2
3
Tuning Voltage (V)
4
5
-55°C
+25°C
POWER OUTPUT (dBm)
+85°C
-55°C
+25°C
+85°C
0.00
0.50
1.00
1.50
2.00
4.56
4.50
3.92
3.26
3.43
31.69
33.49
35.18
36.74
38.45
30.6029.65
32.8632.22
34.9034.44
36.6136.22
38.3037.90
7.04
7.99
8.68
9.13
9.14
6.52
7.85
8.94
9.28
9.27
5.91
7.50
8.84
9.24
9.21
2.50
3.00
3.50
4.00
4.50
3.04
2.80
2.69
2.63
2.61
39.99
41.40
42.76
44.10
45.43
39.8639.51
41.2840.95
42.6342.32
43.9643.66
45.2644.98
9.16
9.17
9.18
9.17
9.35
9.30
9.33
9.34
9.33
9.53
9.21
9.21
9.21
9.19
9.18
5.00
2.64
46.78 46.5946.30 9.33
V
TUNE
0
FREQUENCY (MHz)
HARMONICS (dBc)
F2
F3
POS-75P
Power Output
11
-55°C
Output Power (dBm)
POS-75P
Frequency and Tuning Sensitivity (at +25°C)
TUNING
SENS.
(MHz/V)
+25°C
+85°C
10
9
8
7
6
0
9.51 9.35
1
2
3
Tuning Voltage (V)
4
5
FREQ. PUSHING
(MHz/V)
F4
0.00
0.50
1.00
1.50
2.00
-22.90-29.40-41.07
-24.07-30.73-42.57
-25.49-31.82-42.66
-26.11-32.27-40.44
-25.93-32.93-39.10
0.00
0.06
0.06
0.19
0.13
2.50
3.00
3.50
4.00
4.50
-25.79-33.13-38.46
-25.49-32.99-37.99
-25.17-32.83-37.67
-24.82-32.49-37.16
-24.50-32.00-36.83
0.06
0.13
0.00
0.00
-0.06
5.00 -24.31-31.65-36.81
0.00
POS-75P
Frequency Pushing
(Supply Voltage 12V)
0.3
Pushing (MHz/V)
V
TUNE
0.2
0.1
0.0
-0.1
-0.2
0
1
2
3
Tuning Voltage (V)
4
5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Page 2 of 2