MAXIM MAX11200EEE

19-5509; Rev 0; 9/10
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
The MAX11200, MAX11206, MAX11209, MAX11210,
and MAX11213 evaluation kits (EV kits) consist of
one MAX11200, MAX11206, MAX11209, MAX11210,
or MAX11213 evaluation board and software. The EV
kits are fully assembled and tested circuit boards that
evaluate the MAX11200 family of ultra-low-power, highresolution, serial output ADCs.
XPM-,
VistaM-,
The EV kits include Windows
Windows
and WindowsM 7-compatible software that provides a
graphical user interface (GUI) for exercising the features
of the MAX11200 family of data converters. The EV kits are
connected to a PC through a USB A-to-B cable.
Features
S Windows XP-, Windows Vista-, and Windows
7-Compatible Software
S USB-PC Connection (Cable Included)
S USB Powered (No External Power Supply
Required)
S On-Board Isolated Power Supplies Rejecting
Power Line Noise
S On-Board Optocouplers Isolating ADC from Other
Circuitry
S Real-Time Data Acquisition through USB
S Proven PCB Layout
Selector Guide
Ordering Information
PROGRAMMABLE
GAIN
PART
TYPE
MAX11200EVKIT+
EV Kit
24
N/A
MAX11206EVKIT+
EV Kit
20
1–128
MAX11209EVKIT+
EV Kit
MAX11209EEE+
18
1–128
MAX11210EVKIT+
EV Kit
MAX11210EEE+
24
1–16
MAX11213EEE+
16
1–128
PART
RESOLUTION
MAX11200EEE+
MAX11206EEE+
MAX11213EVKIT+
EV Kit
+Denotes lead(Pb)-free and RoHS compliant.
Component List
DESIGNATION
QTY
C1
1
C2
DESIGNATION
QTY
10FF Q20%, 6.3V X5R ceramic
capacitor (0603)
Murata GRM188R60J106M
C21, C24, C25,
C28
4
1FF Q10%, 16V X7R ceramic
capacitors (0603)
Murata GRM188R71C105K
1
0.01FF Q10%, 16V X7R ceramic
capacitor (0603)
Murata GRM188R71C 103K
C22, C23, C26,
C27
4
18pF Q5%, 50V C0G ceramic
capacitors (0603)
Murata GRM1885C1H180J
C3–C10, C13,
C14, C15, C17,
C18, C33
14
0.1FF Q10%, 25V X7R ceramic
capacitors (0603)
Murata GRM188R71E104K
C34–C37
0
Not installed, ceramic capacitors
(0805)
D1–D4
4
30V, 1A Schottky diodes
(SOD123)
C11, C12
2
D5
1
15V zener diode (DO35)
D6
1
Green LED (0603)
D7
1
Red LED (0603)
FB1
1
120 at 100MHz, 200mA ferrite
bead (0603)
Murata BLM18RK121SN1
C16, C19, C20,
C29–C32
7
DESCRIPTION
1000pF Q10%, 50V X7R ceramic
capacitors (0603)
Murata GRM188R71H102K
4.7FF Q10%, 10V X5R ceramic
capacitors (0805)
Murata GRM219R61A475K
DESCRIPTION
Windows, Windows XP, and Windows Vista are registered
trademarks of Microsoft Corp.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Evaluate: MAX11200/11206/11209/11210/11213
General Description
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Component List (continued)
DESIGNATION
QTY
J1
1
12-position terminal block
DESCRIPTION
J2
1
BNC PC-mount connector
J3
1
USB type-B right-angle
receptacle
J4
0
Not installed, 10-pin (2 x 5)
header
JU1
1
4-pin header
DESIGNATION
QTY
DESCRIPTION
U4, U5, U6
3
High-speed optocouplers (8 DIP)
U7
1
H-bridge driver (8 SO-EP*)
Maxim MAX256ASA+
U8
1
Linear regulator (8 SO)
Maxim MAX1659ESA+
U9
1
Linear regulator (8 SO)
Maxim MAX1658ESA+
U10
1
USB peripheral controller
(24 TQFN-EP*)
Maxim MAX3420EETG+
U11
1
Microcontroller (68 QFN-EP*)
Maxim MAXQ2000-RAX+
U12
1
2.5V LDO regulator (5 SC70)
Maxim MAX8511EXK25+
U13
1
Adjustable LDO regulator
(6 SOT23)
Maxim MAX8880EUT+
Y1
1
2.4576MHz clock oscillator
Hong Kong X’tals
C4L24576NSMI02601-0
JU2–JU5
4
3-pin headers
JU6, JU7, JU10
3
2-pin headers
JU8, JU9
2
12-pin (2 x 6) headers
R1
1
100I Q5% resistor (0603)
R2, R3, R4
3
180I Q5% resistors (0603)
R5–R8
4
330I Q5% resistors (0603)
R9
1
47kI Q5% resistor (0603)
R10, R14
2
360I Q5% resistors (0603)
R11, R12
2
33.2I Q1% resistors (0603)
R13
1
10kI Q5% resistor (0603)
R15
1
10.5kI Q1% resistor (0603)
R16
1
6.49kI Q1% resistor (0603)
R17
1
100kI Q5% resistor (0603)
R18, R19
2
10kI Q1% resistors (0603)
R20–R23
4
0I Q5% resistors (0603)
Y2
1
T1
1
198FH, 3W, 1:1:2.6:2.6-turn
400kHz transformer
HALO Electronics TGM-H281NF
2.048MHz clock oscillator
Hong Kong X’tals
C4L20480NSMI02601-0
Y3
1
12MHz crystal
Hong Kong X’tals
SSM12000N1HK188F0-0
1
20MHz crystal
Hong Kong X’tals
SSM20000NSMI02801-0
TP1, TP3
2
Red multipurpose test points
TP2, TP4
2
Black multipurpose test points
TP5–TP13
9
Orange miniature test points
Y4
U1
1
See the EV Kit-Specific
Component List
—
1
USB high-speed A-to-B cable
—
10
Shunts
—
1
PCB: MAX11200/11206/11209/1
1210/11213 EVALUATION KIT+
U2
1
4:1 analog multiplexer
(16 TSSOP)
Maxim MAX4782EUE+
U3
1
High-precision, low-noise voltage
reference (8 FMAXM)
Maxim MAX6126A30+
*EP = Exposed pad.
µMAX is a registered trademark of Maxim Integrated Products,
Inc.
2 _______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
PART
DESIGNATION
DESCRIPTION
MAX11200EVKIT+
24-bit single-channel ADC (16 QSOP)
Maxim MAX11200EEE+
MAX11206EVKIT+
20-bit single-channel ADC (16 QSOP)
Maxim MAX11206EEE+
MAX11209EVKIT+
18-bit single-channel ADC (16 QSOP)
Maxim MAX11209EEE+
U1
MAX11210EVKIT+
24-bit single-channel ADC (16 QSOP)
Maxim MAX11210EEE+
MAX11213EVKIT+
16-bit single-channel ADC (16 QSOP)
Maxim MAX11213EEE+
Component Suppliers
SUPPLIER
PHONE
WEBSITE
HALO Electronics, Inc.
650-903-3800
www.haloelectronics.com
Hong Kong X’tals Ltd.
852-35112388
www.hongkongcrystal.com
Murata Electronics North America, Inc.
770-436-1300
www.murata-northamerica.com
Note: Indicate that you are using the MAX11200, MAX11206, MAX11209, MAX11210, or MAX11213 when contacting these
component suppliers.
MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Files
FILE
DESCRIPTION
INSTALL.EXE
Installs the EV kit files on your computer
11200_06_09_10_13.EXE
UNINST.INI
Application program
Uninstalls the EV kit software
Quick Start
Procedure
•
MAX11200, MAX11206, MAX11209, MAX11210, or
MAX11213 EV kit (USB A-to-B cable included)
The EV kits are fully assembled and tested. Follow
the steps below to verify board operation before
exercising the full features of the MAX11200 family of data
converters:
•
Windows XP, Windows Vista, or Windows 7 PC with
a spare USB port
1) Verify that all the jumpers are set in their default
positions (see Table 3).
•
High-precision digital voltmeter (DVM)
2) Visit www.maxim-ic.com/evkitsoftware to download the latest version of the EV kit software,
11200_06_09_10_13Rxx.ZIP.
Recommended Equipment
Refer to the MAX11200/MAX11210, MAX11203/
MAX11213, MAX11206/MAX11207, and MAX11209/
MAX11211 IC data sheets while using this EV kit for
detailed descriptions of the device features.
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and underlined refers to items from the Windows operating system.
3) Install the evaluation software on your computer
by running the INSTALL.EXE program. The program files are copied and icons are created in the
Windows Start | Programs menu.
4) Connect the USB cable from the PC to the EV kit
board.
_______________________________________________________________________________________ 3
Evaluate: MAX11200/11206/11209/11210/11213
EV Kit-Specific Component List
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
5) Verify that green LED D6 on the EV kit board
illuminates, indicating the isolated power supply is
good.
6) Verify that red LED D7 on the EV kit board
illuminates, indicating the microcontroller has
successfully finished the board self-test.
7) Start the EV kit software by opening its icon in the
Windows Start | Programs menu.
8) A Device Select window pops up. Select the device
variant installed on the EV kit board and press the
OK button (Figure 1).
9) The software automatically configures the device
to perform a self-calibration and enables the use of
the self-calibration offset and self-calibration gain
values when computing the final offset and gaincorrected data value (set the CTRL3 register to
0x18).
10) The EV kit software main window appears (Figure
2). Verify that Hardware: Connected is displayed
on the status bar at the bottom of the main window.
11) Press the Start Conversion & Data Logging
button. The software switches to the Data Analysis
tab (Figure 3), displaying the scope of the sampled
data.
Figure 1. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Device Select Window)
4 _______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Evaluate: MAX11200/11206/11209/11210/11213
Figure 2. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Main Window)
_______________________________________________________________________________________ 5
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 3. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Data Analysis Tab)
6 _______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
The user MUST perform at least one calibration (either
self-calibration and/or system calibration) before any
measurement. Refer to the MAX11200/MAX11210,
MAX11203/MAX11213, MAX11206/MAX11207, and
MAX11209/MAX11211 IC data sheets for calibration
details. The following calibration procedure details how
to use all the calibration registers in a measurement.
1) To perform a self-calibration (both offset and gain):
a. This is a conversion with internally shorted
inputs, which is done by the internal state
machine. No user manual action is required.
That is, JU9 and JU8 shunt positions can be
anywhere.
b. In the CAL1, CAL0 group box, select the
01 – Self Calibration radio button.
c. In the IMPD group box, select
0 – Calibration/Conversion radio button.
the
d. Press the Send button. The device performs a
self-calibration.
2) To perform a system calibration, a system offset
calibration must be performed first:
a. This is a conversion with the inputs held at
system zero. For the EV kit, one option is to
place the shunt on JU9 across pins 7-8 (AINP =
GND) and place the shunt on JU8 across pins
7-8 (AINN = GND). In the case of a user system,
the user should apply the target system zero to
the AINN and AINP inputs.
b. In the CAL1, CAL0 group box, select the
10 – System Offset Calibration radio button.
c. In the IMPD group box, select
0 – Calibration/Conversion radio button.
the
d. In the CTRL3 register row, type 18 in the Write
Value edit box to enable SCOC and SCGC
registers. Press the Write button.
e. Press the Send button. The device performs
a system offset calibration with self-calibration
registers enabled.
3) The second step of the system calibration is to
perform a system gain calibration. The SOC register
must be enabled before a system gain calibration
is performed.
a. This is a conversion with the inputs held at
system full-scale reference. For the EV kit, one
option is to place the shunt on JU9 across pins
1-2 (AINP = REFP = 3.0V) and place the shunt
on JU8 across pins 3-4 (AINN = REFN = GND).
In the case of a user system, the user should
apply the target system full-scale reference to
the AINP and AINN inputs.
b. In the CAL1, CAL0 group box, select the
11 – System Gain Calibration radio button.
c. In the IMPD group box, select
0 – Calibration/Conversion radio button.
the
d. In the CTRL3 register row, type 10 in the Write
Value edit box to enable the system offset
register and the self-calibration registers. Press
the Write button.
e. Press the Send button. The device performs a
system gain calibration.
4) To enable the calibration coefficients:
a. In the CTRL3 register row, type 00 in the Write
Value edit box. Press the Write button. All the
self and system calibration gain and offset
values are used in the calculation of the
conversion result.
5) Continue to perform a measurement by connecting
AINP and AINN to the measurement target.
Programmable Gain Register Bits
In the CTRL3 register of the MAX11206, MAX11209,
MAX11210, and MAX11213 devices, there are 3 digital
gain bits that control the input-referred gain. The user
can change the gain by typing a new value in the CTRL3
_______________________________________________________________________________________ 7
Evaluate: MAX11200/11206/11209/11210/11213
Calibration Notes
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Table 1. MAX11206/MAX11209/MAX11213
DGAIN[2:0] Decoding
Table 2. MAX11210 DGAIN[2:0] Decoding
GAIN
DGAIN2
DGAIN1
DGAIN0
GAIN
DGAIN2
DGAIN1
DGAIN0
1
0
0
0
1
0
0
0
2
0
0
1
4
0
1
0
2
0
0
1
4
0
1
0
8
0
1
1
8
0
1
1
16
1
0
0
16
1
0
0
16
1
0
1
1
16
1
1
0
16
1
1
1
32
1
0
64
1
1
0
128
1
1
1
register row’s Write Value edit box and pressing the
Write button. Decoding of programmable gain bits is
listed in Tables 1 and 2.
Detailed Description of Software
Software Main Window
In the top section of the main window, an SPIK
command byte can be generated. Select the expected
bit values and press the Send button to send the
command to the ADC.
In the middle section of the main window, SPI register
access commands can be generated. On each register
row, the register bit names are listed. Press the Read
button to read the register value. Type in a new value in
the Write Value edit box, and press the Write button to
write a new value to the register. Every write operation is
automatically followed by a readback operation to verify
that the write operation is successful. Press the Read All
button to read all the register values. Press the Write All
button to write all the new values in the edit boxes to the
registers.
type in the new values, and press Enter to update these
values for conversion-result calculation.
In the Number of Samples Requested edit box, type in
the number of samples expected.
Press the Start Conversion & Data Logging
button to start a data-acquisition session. For continuous
conversion mode, the user can discard the first 3
samples by checking the Do not log the first 3 samples
checkbox.
Press the Stop Conversion & Data Logging button to
stop the data-acquisition session before the requested
number of samples is reached.
After a data-acquisition session is complete or stopped
by the user, the software displays a popup window
(Figure 4) asking if the user wants to save the data to
a file. If the user presses the Yes button, the software
displays a Save As window (Figure 5) to let the user
input the file information for logged data.
In the bottom section of the main window, EV kit and
device status are displayed.
The CLK Selection group box lists the clock input
options for the MAX11200 family of data converters.
The Conversion Mode group box is a duplicate for the
SCYCLE register bit.
In the REFP, REFN, AVDD group box, the factory-set
AVDD and reference voltages are listed. The user can
apply user-supplied AVDD and reference voltages,
Figure 4. MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 EV Kit Software (Save Data Information Popup
Window)
SPI is a trademark of Motorola, Inc.
8 _______________________________________________________________________________________
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Data Analysis Tab
The Data Analysis tab sheet (Figure 3) shows the
waveform scope of the sampled signal. The user can
load previous logged data to view the signal waveform
by pressing the Load Log File… button. The user can
zoom in and zoom out the scope. The user can also save
and print the scope screenshot.
The user can select the Y axis of the scope to be the
ADC conversion counts or the calculated voltage values.
scope. Doing data analysis while data acquisition is in
progress can cause data loss because the PC may not
have enough processing power for multitasking.
Logged Data
Figure 6 shows a sample of logged data (*.csv) opened
in the Microsoft ExcelM spreadsheet. Figure 7 shows
the same file opened in the Microsoft Notepad. Use
monospaced fonts (such as Courier or Lucida Console)
to open the file for clear alignment.
When the device works in fast continuous-conversion
mode, avoid frequently moving the mouse over the
Excel is a registered trademark of Microsoft Corporation.
_______________________________________________________________________________________ 9
Evaluate: MAX11200/11206/11209/11210/11213
Figure 5. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Save As Window)
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 6. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Logged Data Opened in Excel)
10 �������������������������������������������������������������������������������������
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Evaluate: MAX11200/11206/11209/11210/11213
Figure 7. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Software (Logged Data Opened in Notepad)
______________________________________________________________________________________ 11
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Detailed Description of Hardware
The MAX11200, MAX11206, MAX11209, MAX11210,
and MAX11213 EV kits are complete evaluation systems
for the MAX11200 family of data converters. The EV kits
provide on-board isolated power supplies and
optocouplers to reduce noise. The EV kits can do simple
real-time data acquisition for the user to evaluate the
performance of the devices.
See Table 3 for a description of all EV kit jumper
configurations.
Signal Routing
When using an external reference, firmly connect the
reference cables on pins 9 and 10 of the J1 connector.
The devices in the MAX11200 family are single-channel
data converters. Normally, the inputs are applied on pins
11 and 12 of the J1 connector.
Using GPIO1, GPIO2, and GPIO3 to control the MAX4782
4-channel multiplexer, 4 channels of signals can be input
to the MAX11200 family devices. See Table 4 for GPIO1,
GPIO2, and GPIO3 functions.
Table 3. Jumper Descriptions (JU1–JU10)
JUMPER
JU1
JU2
JU3
JU4
JU5
JU6
JU7
JU8
JU9
SHUNT POSITON
ADC CLK connected to on-board 2.4576MHz clock
1-3
ADC CLK connected to on-board 2.048MHz clock
1-4
ADC CLK connected to a user-supplied clock
1-2*
ADC REFP connected to on-board 3.0V reference
2-3
ADC REFP connected to user-supplied reference EXT_REFP
1-2*
ADC REFN connected to isolated GND
2-3
ADC REFN connected to user-supplied reference EXT_REFN
1-2*
ADC DVDD connected to on-board 3.3V isolated power supply
2-3
ADC DVDD connected to user-supplied power supply
1-2*
ADC AVDD connected to on-board 3.3V isolated power supply
2-3
ADC AVDD connected to user-supplied power supply
Open*
1-2
Open*
Disable 2.4576MHz clock oscillator (reduce noise)
Enable 2.4576MHz clock oscillator
Disable 2.048MHz clock oscillator (reduce noise)
1-2
Enable 2.048MHz clock oscillator
1-2*
ADC AINN connected to REFP
3-4
ADC AINN connected to REFN
5-6
ADC AINN connected to (REFP+REFN)/2
7-8
ADC AINN connected to isolated GND
9-10
ADC AINN connected to EXT_AINN
11-12
ADC AINN connected to MAX4782, pin Y
1-2*
ADC AINP connected to REFP
3-4
ADC AINP connected to REFN
5-6
ADC AINP connected to (REFP+REFN)/2
7-8
ADC AINP connected to isolated GND
9-10
ADC AINP connected to EXT_AINP
11-12
ADC AINP connected to MAX4782, pin X
1-2*
JU10
DESCRIPTION
1-2*
Open
ADC DVDD connected to on-board 3.3V isolated power supply
ADC DVDD disconnected from on-board 3.3V isolated power supply
(for current measurement)
*Default position.
12 �������������������������������������������������������������������������������������
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
SELECT INPUT
ENABLE INPUT
(GPIO1)
B(GPIO2)
A(GPIO3)
ON SWITCHES
CTRL2 REGISTER WRITE
EXAMPLE
H
Don’t care
Don’t care
All switches open
0xF1
L
L
L
X-X0
Y-Y0
0xF0
L
L
H
X-X1
Y-Y1
0xF4
L
H
L
X-X2
Y-Y2
0xF2
L
H
H
X-X3
Y-Y3
0xF6
______________________________________________________________________________________ 13
Evaluate: MAX11200/11206/11209/11210/11213
Table 4. MAX4782 Switch Programming (GPIO1, GPIO2, GPIO3)
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 8a. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Schematic (Sheet 1 of 2)
14 �������������������������������������������������������������������������������������
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Evaluate: MAX11200/11206/11209/11210/11213
Figure 8b. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Schematic (Sheet 2 of 2)
______________________________________________________________________________________ 15
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
1.0”
Figure 9. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit Component Placement Guide—Component Side
1.0”
Figure 10. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Component Side
16 �������������������������������������������������������������������������������������
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
Figure 11. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Inner Layer 2
1.0”
Figure 12. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Inner Layer 3
______________________________________________________________________________________ 17
Evaluate: MAX11200/11206/11209/11210/11213
1.0”
Evaluate: MAX11200/11206/11209/11210/11213
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
1.0”
Figure 13. MAX11200/MAX11206/MAX11209/MAX11210/MAX11213 EV Kit PCB Layout—Solder Side
18 �������������������������������������������������������������������������������������
MAX11200/MAX11206/MAX11209/MAX11210/
MAX11213 Evaluation Kits
REVISION
NUMBER
REVISION
DATE
0
9/10
DESCRIPTION
Initial release
PAGES
CHANGED
—
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2010
Maxim Integrated Products 19
Maxim is a registered trademark of Maxim Integrated Products, Inc.
Evaluate: MAX11200/11206/11209/11210/11213
Revision History