Surface Mount Power Splitter/Combiner 2 Way-0° 75Ω Maximum Ratings Operating Temperature Storage Temperature 5 to 1200 MHz -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation ADP-2-10-75M+ 1W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections SUM PORT 1 PORT 1 3 PORT 2 4 Features • wide bandwidth, 5 to 1200 MHz • high isolation, 27dB typ. • excellent VSWR, 1.22:1 typ. • small size • low cost • aqueous washable • protected by US Patent 6,133,525 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size 7” 13” Applications e and Reel Available Tapra cost at no ext Devices/Reel 10, 20, 50, 100, 200, 500 500, 1000 •CATV Electrical Specifications (TAMB=25°C) GROUND6 NOT USED CASE STYLE: CD636 2,5 FREQ. RANGE (MHz) Outline Drawing ISOLATION (dB) 5-50 50-500 500-1000 1000-1200 INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) Typ. Min. Typ. Max. Max. Max. 26 27 29 27 20 22 20 18 0.2 0.4 0.7 1.0 0.5 0.8 1.3* 1.6* 1.0 2.0 4.0 5.0 0.1 0.2 0.3 0.4 * Above 50°C add 0.2 dB to Insertion Loss. Typical Performance Data Frequency (MHz) Total Loss (dB) S-1 S-2 5.00 14.00 32.00 50.00 140.00 320.00 500.00 625.00 800.00 900.00 1000.00 1050.00 1100.00 1150.00 1200.00 3.363.32 3.343.30 3.353.31 3.363.32 3.393.35 3.413.38 3.533.51 3.673.65 3.893.85 3.953.92 3.963.96 3.993.99 4.054.07 4.144.15 4.254.28 1 PCB Land Pattern Suggested Layout, Tolerance to be within ± � .002 Outline Dimensions ( inch mm ) C .220 5.59 D .100 2.54 H .030 0.76 J .026 0.66 K .065 1.65 L .300 7.62 E .162 4.11 F .055 1.40 G .100 2.54 Phase Unbalance (deg.) 25.19 26.78 26.94 26.90 28.19 26.58 26.79 31.34 37.06 29.55 26.82 25.46 27.06 27.23 28.32 0.09 0.12 0.13 0.15 0.20 0.13 0.17 0.20 0.10 0.31 0.47 0.24 0.07 0.02 0.25 VSWR S VSWR 1 VSWR 2 1.101.161.16 1.091.101.10 1.091.101.10 1.091.101.10 1.111.111.10 1.101.091.08 1.101.111.09 1.091.131.11 1.131.171.14 1.131.181.15 1.141.191.16 1.141.211.16 1.171.211.17 1.171.241.18 1.221.241.19 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.25 Demo Board MCL P/N: TB-243 Suggested PCB Layout (PL-141) 0.04 0.04 0.03 0.04 0.03 0.03 0.02 0.02 0.04 0.03 0.00 0.01 0.03 0.01 0.03 Isolation (dB) ADP-2-10-75M+ TOTAL LOSS ADP-2-10-75M+ ISOLATION 40 4.5 4.2 S-1(dB) S-2(dB) ISOLATION (dB) B .310 7.87 TOTAL LOSS (dB) A .272 6.91 Amplitude Unbalance (dB) 3.9 3.6 3.3 3.0 35 30 25 20 0 200 400 600 800 1000 1200 0 200 FREQUENCY (MHz) 400 600 800 1000 1200 FREQUENCY (MHz) ADP-2-10-75M+ VSWR electrical schematic 1.25 VSWR (:1) 1.20 1.15 1.10 1.05 #S-VSWR #1-VSWR #2-VSWR 1.00 0 200 400 600 800 1000 1200 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. B M151107 ED-12390/1 ADP-2-10-75M DY/LC/CP/AM 150522