Desktop Power Supplies DT547x Single Channel USB High Voltage Power Supply Family CAEN High Voltage power supplies now available in a compact, easy and handy device Features • Single Desktop HV channel powered and controlled by USB • Channel Enable/Disable via front panel switch • Available with positive or negative polarity • SHV coaxial output connector • From 500 V to 5 kV, 1 W maximum power • Imon Zoom (x10) • Remote control through USB 2.0 • LabVIEW Instrument Driver • Dedicated LabVIEW Software The DT547x is a new CAEN Power Supply Family providing a Single High Voltage channel in a small size Desktop form factor. The unit is powered and controlled by any Laptop/PC USB 2.0 port and this make it a really portable and practical solution for testing and educational needs. A dedicated LabVIEW based Control Software allows for an easy set and monitor of the High Voltage parameters. The High Voltage output is delivered through SHV connector. Power Supply / Desktop Power Supplies Three versions are available spanning from 500 V to 5 kV and from 200 μA to 1 mA, meeting the needs of a wide range of applications. Each unit is provided with Imon Zoom. This feature enhances the Current monitoring, increasing the resolution of a x10 factor according to the specific model. The HV output Ramp-Up and Ramp-Down rates can be set independently in the range 1÷500 V/s in 1 V/s steps (1÷100 V/s for DT5472) Software DT547x models features: • LabVIEW Instrument Driver • DT547x Control software: LabVIEW Control software with Logging Capability. DT547x Control software allows to set and monitor, through a Graphical User Interface, all the unit’s functional parameters. When DT547x Control Software runs, it creates a datalog file that records the changes of the monitoring parameters. Safety features include: • Channel can be enabled or disabled through the front panel manual switch or via Interlock logic. • Overvoltage and Undervoltage warning when the output voltage differs from the programmed value. • Overcurrent detection: when the channel attempts to exceed the programmed current limit, it signaled to be in “overcurrent” and enter in a TRIP status. The output voltage is varied to keep the current below the programmed limit for a programmable TRIP time, then the channel is switched off. If TRIP is set to “constant current mode”, the channel behaves like a current generator. • Hardware VMAX: maximum output voltage can be set via front panel potentiometer. VMAX value can be read out via software. FREEOAD DOWNL Model Compare Model All CAEN Control Software are available for free download on the web site. Ordering Option Maximum Voltage Maximum Current Iset/Imon Resolution Max. Output Power DT5470 5 kV 200 μA 40 nA (4 nA with Imon Zoom) 1W DT5471 3 kV 500 μA 100 nA (10 nA with Imon Zoom) 1W DT5472 500 V 1 mA 200 nA (20 nA with Imon Zoom) 500 mW Code Description WDT5470XNAAA DT5470N - 1 Channel -5 kV/200 µA USB HV Power Supply Unit WDT5470XPAAA DT5470P - 1 Channel +5 kV/200 µA USB HV Power Supply Unit WDT5471XNAAA DT5471N - 1 Channel -3kV/500μA (1W max) USB HV Power Supply Unit WDT5471XPAAA DT5471P - 1 Channel +3kV/500μA (1W max) USB HV Power Supply Unit WDT5472XNAAA DT5472N - 1 Channel -500 V/1 mA USB HV Power Supply Unit WDT5472XPAAA DT5472P - 1 Channel +500 V/1 mA USB HV Power Supply Unit . News from Catalog web page www.caen.it/news Small details Great differences LabVIEW™ is a trademark of National Instruments. Neither CAEN, nor any software programs or other goods or services offered by CAEN, are affiliated with, endorsed by, or sponsored by National Instruments. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. CAEN Tools for Discovery Copyright © CAEN SpA - 2015 All rights reserved. Information in this publication supersedes all earlier versions. Specifications subject to change without notice. Printed in March 2015 - ADOCUME00107 - BF3258 - rev03 CAEN SpA CAEN GmbH CAEN Technologies, Inc. Via Vetraia 11 55049 - Viareggio • Italy Phone +39.0584.388.398 Fax +39.0584.388.959 [email protected] www.caen.it Klingenstraße 108 42651 - Solingen • Germany Phone +49.212.2544077 Fax +49.212.2544079 [email protected] www.caen-de.com 1140 Bay Street - Suite 2C Staten Island, NY 10305 • USA Phone +1.718.981.0401 Fax +1.718.556.9185 [email protected] www.caentechnologies.com