PKM(10KA) A/B Series Features >Glass passiated junction >RoHS compliant >Bi-directional or Un-directional >Very Low Clamping Voltage >High Temperature soldering:260°C/10 seconds at terminals >High current transient suppressor >Epoxy Encapsulated >Sharp Breakdown Voltage IEC COMPATIBILITY >IEC 6100-4-5(Lightning) 10KA(8/20µs) APPLICATIONS >Base station power >UPS 蓝宝宝浪涌抑制器 Blue powder surge suppressor >Communication power >Railway System >Power system Package Dimensions A Series PKE:3KA PKG:6KA PKM:10KA PKN:15KA Reverse stand-off voltage Polarity C:Bi-polar A:Uni-polar Package Default:No Lead A:16 mm B:24mm C:7.5mm F G L2 L1 Internal code D B E C Type A B C D E F G L1,L2 A 16±0.5 3.2±0.5 20-6 12.3±0.5 1.2 12.3±0.5 5.5 6±2 24.5±0.5 3.2±0.5 20-6 12.3±0.5 1.2 12.3±0.5 3.5-16.5 16.5-3.5 B REV.2015.02.01 01 | www.spsemi.cn PKM(10KA) A/B Series Electrical Characteristics Standoff Reverse Voltage(Vd Leakage c)Volts Part Numbers UN BI Vrwm(V) IR(uA) Breakdown Voltage(Vbr)@IT Min. Max. Clamping Voltage Test Vcl@Ipp 8/20us Current IT max. ma Vcl Package Type Ipp PKM020AA PKM020CA 20 20 22.2 24.5 10 38 10000 A or B PKM022AA PKM022CA 22 20 24.0 26.9 10 42 10000 A or B PKM024AA PKM024CA 24 20 26.7 29.5 10 45 10000 A or B PKM030AA PKM030CA 30 20 33.3 36.8 10 52 10000 A or B PKM033AA PKM033CA 33 20 36.7 40.6 10 58 10000 A or B PKM036AA PKM036CA 36 20 40.0 44.2 10 64 10000 A or B PKM058AA PKM058CA 58 20 64.4 71.2 10 110 10000 A or B PKM066AA PKM066CA 66 20 71.5 81.0 10 125 10000 A or B PKM076AA PKM076CA 76 20 85.0 95.0 10 138 10000 A or B PKM170AB PKM170CB 170 20 180.0 220.0 10 260 10000 B PKM190AB PKM190CB 190 20 200.0 245.0 10 290 10000 B PKM240AB PKM240CB 240 20 250.0 285.0 10 340 10000 B PKM380AB PKM380CB 380 20 401.0 443.0 10 520 10000 B PKM430AB PKM430CB 430 20 440.0 490.0 10 625 10000 B Soldering Parameters Flow/Wave Soldering (Solder Dipping) Power Derating Curve 120 tp TP Critical Zone TL to TP Temperature (T) Percent of Rated Value Ramp-up 100 80 60 40 20 TL tL Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) 0 0 25 50 75 100 AMBIENT TEMPERATURE (°C) REV.2015.02.01 125 150 Peak Temperature : 265OC Dipping Time : 10 seconds Soldering : 1 time 02 | www.spsemi.cn