6 5 MATERIAL AND FINISH: Insulator: Polycarbonate, UL-94V-0 rated Contacts: Copper, Tin plated D RoHS COMPLIANT 4 ELECTRICAL SPECIFICATIONS: Current rating: 10 A Voltage rating: 250 VAC Insulation resistance: 100 Mohm min. at 500 VDC Dielectric withstanding voltage: 2000 VAC for one minute 1 48.5 2.8±0.1 TYP. 0.80 TYP. D 3.0x1.7 TYP. 9.3±0.5 TYP. REPLACE WITH CORRESPONDING PANEL THICKNESS 49.0+0.2 48.6 A+0.2 3.00 36.5+0.2 C R1.5 MAX. TYP. 36.0 3) ELECTRICAL CIRCUIT CONFIGURATION 3 = 10A 250V 70°C 2+GROUND, 1 FUSE 2 POLE SWITCH CHNG CHCK APPR CHANGE E L L I 16.0+0.5 FUSE 40 SEE OPTION 1 LOAD LINE FUSE E L L 14.0±0.2 B N N 4.00 3X 4.0±0.1 8 = 10A 250V 120°C 2+GROUND, 2 FUSE 2 POLE SWITCH FUSE 24.0+0.5 W/O LAMP SCHEMATICS 11 = 10A 250V 70°C 2 POLE, 1 FUSE 2 POLE SWITCH 12 = 10A 250V 70°C 2 POLE, 2 FUSE 2 POLE SWITCH 4) PANEL THICKNESS REV REVISIONS FUSE WITH LAMP 4 = 10A 250V 70°C 2+GROUND, 2 FUSE 2 POLE SWITCH DATE LINE 0 7 = 10A 250V 120°C 2+GROUND, 1 FUSE 2 POLE SWITCH A N N 52 3X 2.00±0.05 LOAD RECOMMENDED PANEL CUTOUT 1 = 10A 250V 70°C 2+GROUND, 1 FUSE 1 POLE SWITCH B 19 X.X 1) SNAP-IN MOUNT 3 = WITHOUT LAMP 8 = WITH NEON LAMP C 2 V D E ORDERING CODE: 42R37-__ __ 2 __ - __ __ __ 1 2 3 4 2) COLOR 1 = BLACK 2 = GRAY 3 6 TOLERANCE UNLESS OTHERWISE SPECIFIED X ± 1 X.X ± 0.4 X.XX ± 0.20 P/N A MAX. PANEL THICKNESS 1.5 42R37-XX2X-150 1.5 DRAWN GQ BY 42R37-XX2X-200 2.0 2.0 CHECK TD BY ADDITIONAL PANEL THICKNESS AND ONE APPR PB POLE SWITCH AVAILABLE ON REQUEST BY 5 4 3 Phone: 973 560-0019 Whippany, New Jersey Fax: 973 560-0076 PART: IEC 60320 FUSE HOLDER AND POWER SWITCH APPL. INLET; SOLDER TERMINALS DATE: 09/21/01 DATE: 09/26/01 DATE: 09/26/01 PART #: SIZE: SCALE: SHEET 1 of 1 42R37-XX2X-XXX A NTS 2 ALL DIMENSIONS FOR REFERENCE ONLY DIMENSIONS ARE IN MILLIMETERS 1 REV: A