Data Sheet - SL-P7T2E37MZWW

DATE OF ISSUE : March 03, 2015
Document No.
LED Module
P7T2E37MZWW-02
REV.NO.
SPECIFICATION
LED Module for Modular Platform Series
Model Name
LED Platform Module with Fin
CRI min. 70, 4000K, Flux Rank 3,
Type
Type Ⅱ-M(2), 351Z PKG
Parts No.
SL-P7T2E37MZWW
SAMSUNG ELECTRONICS CO., LTD.
02
PAGE
1/9
DATE OF ISSUE : March 03, 2015
Document No.
P7T2E37MZWW-02
REV.NO.
LED Module
PAGE
02
2/9
REVISION HISTORY OF SPECIFICATION
REV.
NUM
REVISION
PAGE
DATE
TRACED
APPROVED
1
The First specification established.
1~9
2014.12.05
-
S.A. Joo
2
Forward Voltage, Vf Changed
7
2015.03.03
-
S.A. Joo
DATE OF ISSUE : March 03, 2015
Document No.
P7T2E37MZWW-02
REV.NO.
LED Module
PAGE
3/9
02
CONTENTS OF SPECIFICATION
1. APPLICATION
................................................................................................
2. FUNDAMENTAL SPECIFICATIONS OF MODULE
3. PARTS SPECIFICATIONS
....................................
4
6
............................................................................ 7
4. APPEARANCE AND STRUCTURE ..................................................................
8
5. PACKING SPECIFICATION
9
............................................................................
This is a product specification of SL-P7T2E37MZWW, one of SL-Puv2Ewaabcc.
Please refer to relevant General and Special Application Notes for thermal, optical, electrical,
mechanical design and reliability information.
DATE OF ISSUE : March 03, 2015
Document No.
P7T2E37MZWW-02
REV.NO.
LED Module
PAGE
02
1. APPLICATION
Platform LED Module is designed as a core component in Modular Platform Engine
Series for street light and flood light application. This document especially specifies
Platform LED Module with Fin, generally recommended for luminaires with insufficient
thermal management by the fixture itself.
1-1 Modular Platform Modules.
There are three different types of heat sink designs for Platform LED Module,
intended for thermal management either by engine or by fixture.
This document especially specifies Platform LED Module with Fin for thermal
management by Modules or Engines themselves.
(a) Module with Fin
[Thermal management by Module/Engine]
(b) Module without Fin
[Thermal management by Fixture]
1-2 Modular Platform Engine Series
Typical operating current for one module is set at 700mA, which allows lumen output
increment by 2100lm(nominal value) depending on the number of LED modules.
1-2-1 Lumen Packages with LED Driver
Power
Consumption
(Engine, Nominal)
Modules
(ea)
Driver
Output
Channels
(ea)
Operating
Current
(mA)
Lumen
Output
(lm)
25W
1
1
700
2100
50W
2
1
700
4200
75W
3
1
700
6300
100W
4
2
700
8400
150W
6
2
700
12600
※ This Module is recommended using a Isolated PSU.
1-2-2 Current Distribution across Modules
Current per module can vary depending on the Vf distribution of modules in parallel,
deviating from the nominal operating current(700mA). The Vf distribution of modules is
tightly controlled to achieve uniform driving currents.
4/9
DATE OF ISSUE : March 03, 2015
Document No.
LED Module
P7T2E37MZWW-02
REV.NO.
PAGE
5/9
02
1-2-3 Optic Solutions
Application
Street Light
Flood Light
Light
Distribution
Solutions
Material
IESNA Type I
Medium(1)
PC
IESNA Type II
Short(1), Medium(1), Medium(2)
PC
IESNA Type III
Medium(1)
PC
IESNA Type IV
Medium(1)
PC
IESNA Type V
Short(1)
PC
Medium
Batwing(BA85)
PC
※ BA : Beam Angle, PC : Polycarbonate
DATE OF ISSUE : March 03, 2015
Document No.
P7T2E37MZWW-02
REV.NO.
LED Module
PAGE
02
6/9
2. FUNDAMENTAL SPECIFICATIONS OF MODULE
No.
ARTICLE
SPECIFICATIONS
Photometric Specification of Platform LED Module @700mA(stabilized at Tc~65℃)
CCT
4000K
Article
Symbol
MIN
TYP
MAX
Unit
Equipments
Luminous Flux
LF
1950
2100
lm
Goniometer
Color Temperature
CCT
3650
3900
4200
K
Integrating Sphere
Color Rendering Index
CRI
70
Ra Integrating Sphere
※ Typical values are not necessarily the same as the nominal values.
Light Distribution Profile : Type II Medium(2) with Optimized Illuminance Uniformity
2-1
※ The isolux diagram is drawn at the luminaire height of 5m.
※ IES files(in IESNA or CIE format) are available with Optical Application Notes.
2-2
Dimension
2-3
Weight
ㆍLED Module with Fin : 150(L)×50(W)×45.02(H) ㎜
ㆍLED Lighting Module : {0.28kg ± 0.03kg} * 12ea
ㆍTotal Weight (including packing box) : 4.8kg ± 0.5kg/1box
ㆍCase Temperature : +10℃ ~ +80℃ (Tc ~ 65℃ at Ta ~ 25℃)
2-4
Operating
Temperature
※ Recommended Tc points as a function of number of modules are
described in Thermal Application Notes.
2-5
Storage
Temperature
ㆍ-30℃ ~ +70℃ (Tc)
2-6
Dust-proof
Water-proof
ㆍIP66 for CE Marking
※ Ambient temperature without operation
ㆍDamp Location for UL Marking
DATE OF ISSUE : March 03, 2015
Document No.
P7T2E37MZWW-02
REV.NO.
LED Module
No.
ARTICLE
PAGE
02
7/9
SPECIFICATIONS
Electrical Specification of Platform LED Module (stabilized at Tc~65℃)
Article
Symbol
MIN
TYP
MAX
Unit
Remarks
Power Consumption
P
-
21
25
W
30V x 0.7A, module only
DC Forward Current
I
-
700
700
㎃
per 1 Module
[700mA /PKG 1EA,TYP.]
Forward Voltage
Vf
26.0
30.0
33.0
V
per 1 Module
[3.0V/PKG 1EA, TYP.]
10 LEDs in Series
Type Classification
2-7
Eye Protection
ㆍBuilt-in module
ㆍRisk Group 2
Working Voltage for
ㆍ50V
Insulation
※ The power consumption for a specific module is dependent on the operating voltage
distribution across the modules in parallel connection. The maximum operating current
means the highest limit in any operating condition.
※ Typical and Maximum Operating Current may have ±5% Tolerance
※ Voltage difference between modules are tightly controlled to be less than 1.0V so that
the maximum current of any module can be limited to 700mA. Voltage bins of modules
will be designated on the module label and box label.
※ Safety and wiring information will be described in Electrical Application Notes.
※ We recommend users to attach the surge protector to a PSU or to use a PSU that
equipped surge protect circuit suitable for the user's atmosphere condition.
3. PARTS SPECIFICATIONS
No.
ARTICLE
3-1
Lens Cover
Screw
3-2
SPECIFICATIONS
ㆍMaterial : Stainless Steel with Teflon Washer
ㆍLocation : between the array lens and heat sink
ㆍMaterial : Polycarbonate
ㆍThickness : 2.0 ㎜
Array Lens Cover ㆍLens Type : Type Ⅱ-M(2)
ㆍUL-94 Flammability : V-2
※ Protective Equipment in Luminaries needs to prevent flaming drips.
3-3
Seal Rubber
3-4
LED Board
3-5
Side Inlet
Harness
3-6
Heat Sink
(with Fin)
ㆍMaterial : Molded Silicone
ㆍLED : Ceramic PKG, CCT 4000K, CRI min. 70
ㆍMaterial : MCPCB, Aluminum
ㆍThickness : 1.6 ㎜
ㆍStainless Steel Screws : 3ea
ㆍMaterial : Molded PVC coated with Sealant Silicone, 105℃ rating
ㆍWires : 24 AWG, 105℃ rating
ㆍLength(wires) : 550 ㎜
ㆍMaterial : Die-cast Aluminium
ㆍThermal Pad between the PCB and Heat Sink
DATE OF ISSUE : March 03, 2015
Document No.
P7T2E37MZWW-02
REV.NO.
LED Module
02
PAGE
8/9
4. APPEARANCE AND STRUCTURE
No.
ARTICLE
4-1
Appearance
and
Dimension
(Type Ⅱ-M(2))
SPECIFICATIONS
※ Appearance is different for various optical solutions depending on
the combination of the 10 core lenses. Critical dimensions are all the
same for the optical solutions except for the thickness difference at
the core lens cross-section. Detailed information on the lenses are
described in Optical and Mechanical Application Notes.
4-2
Structure
(Type Ⅱ-M(2))
Labelling for
4-3
Vf Binning
SL-P7T2
E37MZWW
SL-P7T2
E37MZWW
NC13
E00019
NP
4000K-S
NC13
000004 50
Vf bin
SL-P7T2E37MZWW
50
(General)
Vf bin
[LED Board Label]
[Module Label]
[Box Label]
DATE OF ISSUE : March 03, 2015
Document No.
LED Module
P7T2E37MZWW-02
REV.NO.
02
5. PACKING SPECIFICATION
5-1 Packing Method
5-1-1 Inner Box : 6 modules of the same Vf bin in one inner box
6 PCs/Inner Box
5-1-2 Outer Box : 12 modules on 2 stacks of inner boxes in one outer box
2 Stacks of Inner Boxes
(419 x 240 x 189)
5-2 Pallet : 32 boxes(384 modules) on one pallet
※ Two stacks of pallets are allowed.
PAGE
9/9