RF Characterization Report RF179 Series Cable Assemblies RF179-72SP1-72SP1-0306 RF179-72RP1-72RP1-0306 RF179-74SP2-74SP2-0306 RF179-74BJ2-74BJ2-0305 RF179-77SP1-77SP1-0306 RF179-77RP1-77RP1-0306 Description: RF Cable Assembly, 75 Ohm, RG179 Cable Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 1/5/2010 All Rights Reserved RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable Table of Contents Test Setup Information .................................................................................................... 1 Scope: ......................................................................................................................... 1 Product Description: .................................................................................................... 1 Test Calibration:........................................................................................................... 2 VNA Adaption for 75 ohm Testing: .............................................................................. 2 Adapter Use:................................................................................................................ 2 Definition of Assembly under Test: .............................................................................. 2 Port Designations: ....................................................................................................... 2 Legend for Plots:.......................................................................................................... 2 Results Summary ............................................................................................................ 3 3G SDI Conformance: ................................................................................................. 3 RF179-72SP1-72SP1-0306......................................................................................... 4 RF179-72RP1-72RP1-0306 ........................................................................................ 5 RF179-74SP2-74SP2-0306......................................................................................... 6 RF179-74BJ2-74BJ2-0305 .......................................................................................... 7 RF179-77SP1-77SP1-0306......................................................................................... 8 RF179-77RP1-77RP1-0306 ........................................................................................ 9 Instrument Setup: .......................................................................................................... 10 Test Fixture: .................................................................................................................. 10 Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:ii Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 1/5/2010 All Rights Reserved RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable Test Setup Information Scope: To perform characterization tests, Insertion Loss, Return Loss and Voltage Standing Wave Ratio. Product Description: The table below presents a description of the different RF06T and RFB6T series cable assemblies that were tested Part Number Length Termination β End 1 Termination β End 2 RF179-72SP1-72SP1-0306 306 mm MCX7, Straight Plug MCX7, Straight Plug RF179-72RP1-72RP1-0306 306 mm MCX7, Right Angle Plug MCX7, Right Angle Plug RF179-74SP2-74SP2-0306 306 mm BNC7T, Straight Plug BNC7T, Straight Plug RF179-74BJ2-74BJ2-0305 305 mm BNC7T, Straight Bulkhead Jack BNC7T, Straight Bulkhead Jack RF179-77SP1-77SP1-0306 306 mm SMB7H, Straight Plug SMB7H, Straight Plug RF179-77RP1-77RP1-0306 306 mm SMB7H, Right Angle Plug SMB7H, Right Angle Plug Report Revision: 1/5/2010 [email protected] Page:1 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable Test Calibration: Calibration is performed using the 75 ohm Agilent mechanical calibration kit, PN 85036B to the calibration point below. Any adapters beyond this point are included in the measurements. (Sample setup of adapters, actual setup not depicted.) VNA Adaption for 75 ohm Testing: In order to use the Agilent E5071C VNA for 75 ohm testing, we utilize Agilent minimum loss pads, PN 11852B. These matching pads are only rated to 3 GHz and as such, the data above 3 GHz is for reference only. There is a notable amount of ringing in the Insertion Loss curves for all samples above 3 GHz and again above roughly 5.5 - 6 GHz caused by this limitation. Adapter Use: Each port uses at least one precision adapter capable of mating to the assembly under test. Any supplementary adapter will contribute additional electrical characteristics to the measured data. Any use of additional adapters is noted. Definition of Assembly under Test: The performance characteristics include the interface with adapters. Port Designations: The connector attached to port 1 of the VNA is βEnd 1β from the part number callout. Insertion Loss is measured using S21 and Return Loss / VSWR is measured using S11. Legend for Plots: 5 samples were tested. Only the min/max plots are presented for clarity in this report. Report Revision: 1/5/2010 [email protected] Page:2 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable Results Summary 3G SDI Conformance: This series is optimized to conform to 3G SDI applications. The specification stipulate a return loss lower than -15dB from DC to 1.5 GHz and a lower than -10dB from 1.5 GHz to 3 GHz (SMPTE-424). (Return Loss SMPTE Specification) All of the samples documented in this report met the return loss requirements of SMPTE-424 Report Revision: 1/5/2010 [email protected] Page:3 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable RF179-72SP1-72SP1-0306 Report Revision: 1/5/2010 [email protected] Page:4 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable RF179-72RP1-72RP1-0306 Report Revision: 1/5/2010 [email protected] Page:5 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable RF179-74SP2-74SP2-0306 Report Revision: 1/5/2010 [email protected] Page:6 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable RF179-74BJ2-74BJ2-0305 Report Revision: 1/5/2010 [email protected] Page:7 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable RF179-77SP1-77SP1-0306 Report Revision: 1/5/2010 [email protected] Page:8 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable RF179-77RP1-77RP1-0306 Report Revision: 1/5/2010 [email protected] Page:9 RF Characterization Report Series: RF179 Description: RF Cable Assembly, 75 Ohm, RG179 Cable Instrument Setup: Network Analyzer Mechanical Calibration Kit Agilent E5071C ENA Series (9 KHz - 8.5 GHz Range) 85036B Averaging Factor Smoothing IF Bandwidth Sweep Start Sweep End Points 4 Off 300 Hz 5 MHz 8.5 GHz 601 Test Fixture: (Typical set-up, actual part not depicted.) Report Revision: 1/5/2010 [email protected] Page:10