SANGDEST MICROELECTRONICS 30BQ060 Technical Data Data Sheet N0675, Rev. - Green Products 30BQ060 SCHOTTKY RECTIFIER Applications: • • • • • • • Disk Drives Switching power supply Redundant power subsystems Converters Free-Wheeling diodes Reverse battery protection Battery Charging Features: • • • • • • • Small foot print, surface moutable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request Mechanical Dimensions (In mm / Inches): SMC • Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 • • FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn • SANGDEST MICROELECTRONICS 30BQ060 Technical Data Data Sheet N0675, Rev. - Green Products Marking Diagram: Where XXXXX is YYWWL SC3H YY WW L = Part Name = Year = Week = Lot Number Cautions：Molding resin Epoxy resin UL:94V-0 Ordering Information: Device Package SMC (Pb-Free) 30BQ060 Shipping 3000pcs / reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Symbol VRWM Max. 60 Units V IF(AV) Condition 50% duty cycle @TC =123°C, rectangular wave form 3.0 A IFSM 8.3 ms, half Sine pulse 156 A • Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 • • FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn • SANGDEST MICROELECTRONICS 30BQ060 Technical Data Data Sheet N0675, Rev. - Green Products Electrical Characteristics: Characteristics Max. Forward Voltage Drop* Symbol VF1 VF2 Max. Reverse Current * IR1 IR2 Max. Junction Capacitance CT Typical Series Inductance LS Max. Voltage Rate of Change dv/dt Condition @ 3 A, Pulse, TJ = 25 °C @ 6 A, Pulse, TJ = 25 °C @ 3 A, Pulse, TJ = 125 °C @ 6 A, Pulse, TJ = 125°C @VR = Rated VR, Pulse, TJ = 25 °C @VR = Rated VR, Pulse, TJ = 125 °C @VR = 5V, TC = 25 °C fSIG = 1MHz Measured lead to lead 5 mm from package body - Condition - Max. 0.58 0.76 0.52 0.66 0.5 Units V 20 mA 180 PF 3.0 nH 10,000 V/μs Specification -55 to +150 -55 to +150 Units °C °C V mA * Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications: Characteristics Max. Junction Temperature Max. Storage Temperature Maximum Thermal Resistance Junction to Lead Maximum Thermal Resistance Junction to Case Approximate Weight Case Style Symbol TJ Tstg RθJL DC operation 12 °C/W RθJA DC operation 46 °C/W 0.65 g wt SMC • Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 • • FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn • SANGDEST MICROELECTRONICS Technical Data Data Sheet N0675, Rev. - 30BQ060 Green Products • Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 • • FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn • SANGDEST MICROELECTRONICS Technical Data Data Sheet N0675, Rev. - 30BQ060 Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • Weiqi Street, Airport Development Zone, Jiangning District, Nanjing, China 211113 (86) 25-87123907 • • FAX (86) 25-87123900 • World Wide Web Site - http://www.sangdest.com.cn • E-Mail Address - sales@ sangdest.com.cn •