PA512 / SPA512 Cascadable Amplifier 10 to 500 MHz Rev. V2 Features • • • • Product Image HIGH POWER OUTPUT: +27.5 dBm (TYP.) HIGH THIRD ORDER I.P.: +39 DBm (TYP.) MODERTE NOISE FIGURE: 5.2 dB (TYP.) GaAs FET AMPLIFIER Description The PA512 0.5 watt RF power amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This 2 stage GaAs FET transistor design uses a feedback loop for flat broadband performance. An active DC biasing network insures temperature-stable performance. MIL-STD-883 environmental screening is available. Ordering Information Part Number Package PA512 TO-8 MAAM-007502-SPA512 Surface Mount MAAM-007502-CPA512 SMA Connectorized Electrical Specifications: Z0 = 50Ω Ω, VCC = +15 VDC Parameter Absolute Maximum Ratings Typical Guaranteed Parameter Absolute Maximum 25ºC 0º to 50ºC -54º to +85ºC* Storage Temperature -62ºC to +150ºC Case Temperature +85ºC DC Voltage +17 V Continuous Input Power +17 dBm Short Term Input power (1 minute max.) 100 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) +85ºC Units Frequency MHz 10-700 10-500 10-500 Small Signal Gain (min) dB 18.0 16.0 15.0 Gain Flatness (max) dB ±0.3 ±0.7 ±1.0 Reverse Isolation dB 24 Noise Figure (max) dB 5.2 6.0 6.5 Power Output @ 1 dB comp. (min) dBm 27.5 26.0 25.5 IP3 dBm +33 IP2 dBm +45 Parameter Rating Second Order Harmonic IP dBm +50 Thermal Resistance θjc ºC/W Transistor Power Dissipation Pd W Junction Temperature Rise Above Case Tjc ºC VSWR Input / Output (max) DC Current @ 15 Volts (max) mA Thermal Data: VCC = +15 VDC 1.4:1 / 2.0:1 1.8:1 / 2.2:1 2.0:1 / 2.3:1 200 210 220 * Over temperature performance limits for part number CPA512, guaranteed from 0oC to +50oC only. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. PA512 / SPA512 Cascadable Amplifier 10 to 500 MHz Rev. V2 Typical Performance Curves at +25°C Outline Drawing: TO-8 * Gain Gain - dB 19 18 17 +25°C +85°C -54°C 16 5 50 150 250 350 450 600 Fr equency - MHz VSWR 2.5 i nput VSWR out put 2 WEIGHT: 1 gram (0.04 oz.) max 1.5 Outline Drawing: Surface Mount * 1 5 50 150 250 350 450 600 Frequency - MHz No ise Figure Noise Figure dB 6 5 4 10 30 50 200 400 600 Fr equency - MHz P o wer Output @ 1dB Co mpressio n 40 Power Output dBm WEIGHT: 1 gram (0.04 oz.) max 30 Outline Drawing: SMA Connectorized * 20 10 5 50 200 Frequency - MHz 400 600 Intercept P o ints Intercept Point dBm 70 60 50 40 30 20 IP2 2nd har m 10 IP3 WEIGHT: 19 grams (0.67 oz.) max 0 5 50 200 400 600 Frequency - MHz ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.