M4TH Load Insensitive Mixer Rev. V3 Features • • • • • • • Product Image LO 1 TO 3400 MHz RF 1 TO 3400 MHz IF 1 TO 2000 MHz LO DRIVE: +23 dBm (NOMINAL) INSENSITIVE TO SYSTEM MISMATCH HIGH INTERCEPT: +29 dBm (TYP.) AVAILABLE IN SURFACE MOUNT Description The M4TH is a termination insensitive mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky bridge quad diodes, broadband ferrite baluns and internal loads to provide excellent performance without degradation due to external VSWR mismatches. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in semi-automated and automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number Package M4TH Flatpack Electrical Specifications: Z0 = 50Ω Lo = +23 dBm (Downconverter application only) Typical Parameter SSB Conversion Loss (max) & SSB Noise Figure (max) Test Conditions fR = 0.005 to 2.0 GHz, fL = 0.005 to 2.0 GHz, fI = 0.001 to 0.5 GHz fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz , fI = 0.001 to 2.0 GHz Guaranteed Units +25ºC -54º to +85ºC dB dB 7.0 9.0 8.0 10.5 8.3 10.8 Isolation, L to R (min) fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz dB dB 35 35 30 22 29 21 Isolation, L to I (min) fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz dB dB 40 35 30 25 29 24 Isolation, R to I (min) fR = 0.001 to 3.4 GHz dB 21 1 dB Conversion Comp. fL= +23 dBm dBm +17 Input IP3 fR1 = 2 GHz at 0 dBm, fR2 = 2.01 GHz at 0 dBm, fL = 1.9 GHz at +23 dBm dBm +29 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. M4TH Load Insensitive Mixer Rev. V3 Typical Performance Curves Outline Drawing: Flatpack * Weight: 1 gram (0.04 oz.) max. Absolute Maximum Ratings Parameter Absolute Maximum Operating Temperature -54ºC to +100ºC Storage Temperature -65ºC to +100ºC Peak Input Power +27 dBm max @ +25ºC +23 dBm max @ +100ºC Peak Input Current 50 mA DC 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.