CENB1150 Universal Input 150 Watt Series Industrial/ITE Switch-Mode Power Supply 3 Year Warranty •90-264VAC Universal Input •Meets Efficiency Level V, EU(EC) No 278/2009 Phase II •Desktop Style •12V to 24V Single Output Models, up to 150W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W nd •Meets UL/EN/IEC60950-1, 2 Edition RoHS All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. Specifications AC Input 100-240Vac, +/-10%, 47-63 Hz, 1∅ Input Current Inrush Current Input Fuse Hold-up Time 60A peak @ 264Vac, cold start Turn-on Time 3.15A, 250V Internal Primary Current Fuse provided Efficiency MTBF 100 Vac: 2.5 A Meets Efficiency Level V, ErPII Short Circuit Protection Output Power See chart Topology Line/Load Regulation Transient Response Excluding Cord: Line: +/- 1%, Load: +/-5% 500μs max., 50% load step, typical Minimum Load Case Material Not required Black 94V0 Polycarbonate 200mS max @ 11//240Vac Overload Protection See chart 1% pk-pk max., 20MHz BW 2 sec max @110/240Vac Output Rise Time Output Voltage Ripple and Noise 100,000 hours calculated 18 mS min @ 110Vac, 21mS min @ 240 Vac Safety and EMC Approvals Dielectric Withstand Hiccup Mode Hiccup Mode Switching – Fixed Frequency Flyback EN/IEC/CSA/UL60950-1, 2nd Edition EMC: See chart Input-Output: 4,372Vac Input-GND: 2,186Vac, Output-GND: 500Vdc Operating Temperature 0° to 35°C, no derating Storage Temperature Relative Humidity -30 to +85°C 5% to 95%, non-condensing Case Dimensions 212mm x 67.4mm x 48mm, see mechanical drawing Altitude Weight Output Connections Cable: 18AWG UL2464, 1,200mm, 4 conductor Connector: Ault #51, 6-pin Molex, other options available 700g 0 to 5000m EMI/EMC Compliance Conducted Emissions EN55011/22, Class B Radiated Emissions EN55011/22, Class B Line Frequency Harmonics EN61000-3-2 Voltage Fluctuations EN61000-3-3, Line Flicker Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge, Criteria A Radiated RF Immunity EN61000-4-3, 3V/m, Criteria A EFT/Burst Immunity EN61000-4-4, 2kV/5kHz, Criteria A Line Surge Immunity EN61000-4-5, 1kV diff., 2kV common-mode, Criteria A Conducted RF Immunity EN61000-4-6, 3Vrms, Criteria A Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m, Criteria A Voltage Dip Immunity EN61000-4-11, 100% dip, 10mS, Crit. A; 60% dip, 100mS, Crit. A; 30% dip, 500mS, Crit. C; 100%, 5000mS, Crit. C. ______________________________________________________________________________________________________________________________ 1 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com CENB1150 Universal Input 150 Watt Series Industrial/ITE Switch-Mode Power Supply 3 Year Warranty Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) CENB1150A1251F01 12 V 12.5 A 150 W 120mV CENB1150A1551F01 15 V 10.0 A 150 W 150mV CENB1150A1851F01 18 V 8.3 A 150 W 180mV CENB1150A2451F01 24V 6.25 A 150 W 240mV Model Number Key CENB 1 150 A 12 51 F 01 Model Input Connector: Output Connector: Output Voltage: Model Output Pow er: # of Outputs Product Fam ily: "01" = Standard. "02" and higher indicates a m odified m odel. "F" = IEC320 C14 grounded. Other options available, see below . "51" = Molex 39-01-2060. Other options available. "12" = 12Vdc, "15" = 15Vdc, etc. A = Original Configuration "150" = 150 Watts "1" = Single Output "C" = Com m ercial/Industrial/ITE, "E" = External, "NB" = Model Series Designator Connector Information Input Connector Options Class I (grounded) Inlet: “F” = IEC60320 C14 Class II (ungrounded) Inlets: “N” = IEC60320 C8 “Q” = IEC60320 C18 DC Output Connector Output Connector Options Pinout “51” = 6 pin, Molex 39-01-2060 or equiv. Pins 1,4: +Vout Pins 3,6: -Vout Pins 2,4: NC Mating Connector Molex 39-01-3063 or equiv. Outline Drawing “F” Inlet shown. Other options available, see above. Data Sheet © 2015 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 6-19-15 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: [email protected] • www.slpower.com