PMC-1401T S W I T C HI N G T HE S M A R T WAY PMC-1401T Standard SMD Reed Switch pitch 18.2 mm Electrical Characteristics @ 25 °C Contact form Features A Contact material Small size Ru Contact rating max. Switching voltage max. W / VA 10 VDC 200 VAC 140 Switching current max. A 1 Carry current max. A 1.2 Breakdown voltage min. VDC 240 Contact resistance max. (initial) mΩ 150 Insulation resistance min. Ω AT 10 - 25 Drop out min. AT 5 TC 014 ± AT Perfect economical alternative to Hall switches Suitable for automated assembly Tape & reel packaging 2 Operating Characteristics @ 25 °C Hz 500 Resonant frequency typ. Hz 4000 Operate time max. (incl. bounce) ms 1 Release time max. ms 0.4 Switching frequency max. Over 1 billion reliable operations at dry circuits or low level loads @ 25 °C Pull in range available Test equipment tolerance Suitable for lead-free soldering 10 10 Magnetical Characteristics (of unmodified Reed Switch) Test coil Minimum height above PCB Approvals Environmental Characteristics Operating temperature °C -60 to + 155 Storage temperature °C -60 to +155 Soldering temperature max. °C Vibration (50-2000 Hz) g 20 Shock (1/2 sin 11 ms) g 100 Lead tensile strength min. kg 4 300 Dimensions in mm Ordering Information Packing Unit 2500 pcs Weight per piece 0.1 g Weight per package 700 g C I P © H b m G Reel size 13 inches Standard AT ranges 10 to 15 AT 15 to 20 AT 20 to 25 AT Ordering example PMC-1401T1520 describes PMC-1401T with 15 to 20 AT. Position of contact blades not defined. Page 1 of 2 Rev.: 1.7 pmc1401t_ds_e_1.7 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com PMC-1401T S W I T C HI N G T HE S M A R T WAY PMC-1401T Standard SMD Reed Switch pitch 18.2 mm Recommended PCB Layout in mm Soldering Information Mounting Force Recommended Mounting Force 3N Maximum Mounting Force 8N Tape Dimensions in mm Remarks Tolerance ±0.1 unless otherwise specified When placed onto ferromagnetic parts switching distance of PMC-1401T may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the SMD Reed Switch. Page 2 of 2 Rev.: 1.7 pmc1401t_ds_e_1.7 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com