MS-332-6 S W I T C HI N G T HE S M A R T WAY MS-332-6 Power Reed Sensor Flatpack Electrical Characteristics @ 25 °C Contact form Features A W / VA 50 VDC 200 VAC 250 Switching current max. A 1.5 Carry current max. A 2 Breakdown voltage min. VDC 400 Total resistance max. (initial) mΩ 200 Ω 10 10 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Pull in range available AT 5 TC - 020 Customized types available Approvals 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Various sensitivity ranges available @ 25 °C Test coil ± AT Adjustable switching point 25 - 40 Drop out min. Test equipment tolerance Sensor with Power Reed Switch @ 25 °C Hz 300 Resonant frequency typ. Hz 2600 Operate time max. (incl. bounce) ms 1 Release time max. ms 0.4 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 20 Shock (1/2 sin 11 ms) g 50 Environmental Characteristics Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 5.8 g Weight per package 300 g C I P © H b m G Standard AT Ranges 4= 25 to 30 AT 5= 30 to 35 AT 6= 35 to 40 AT Ordering Example MS-332-6-4 describes MS-332-6 with 25 to 30 AT. Page 1 of 2 Rev.: 1.4 ms3326_ds_e_1.4 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-332-6 S W I T C HI N G T HE S M A R T WAY MS-332-6 Power Reed Sensor Flatpack Material Information Material Colour Housing ABS black Cable UL 1007/1569, AWG 24, 4 mm stripped and tinned black Potting compound Epoxy black Test Procedure of final Reed Sensor Test Parameters Test coil TC- 324 Test programs AT range Test program 4 = MS-332-6-4 5 = MS-332-6-5 6 = MS-332-6-6 Remarks When mounted onto ferromagnetic parts switching distance of MS-332-6 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Only non-ferromagnetic screws to be used for mounting. Matching actuator MSM-332 available as well. Test Coil placed in vertical position Reed Sensor diagonally centered in Test Coil Page 2 of 2 Rev.: 1.4 ms3326_ds_e_1.4 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com