CRH-500 S W I T C HI N G T HE S M A R T WAY CRH-500 Power Form C Switch Electrical Characteristics @ 25 °C Contact form Features C Contact material Contact rating increased! Rh W / VA Contact rating max. Switching voltage max. 60 VDC 500 VAC 350 Switching current max. A 1 Carry current max. A 3 Breakdown voltage min. VDC 1200 Contact resistance max. (initial) mΩ 130 Ω 10 9 Insulation resistance min. 60 Watts Power Switch Form C switch (change over type) Various sensitivity ranges available Magnetical Characteristics (of unmodified Reed Switch) Pull in range available AT @ 25 °C Drop out min. AT 15 Test coil TC 500 Test equipment tolerance 2 ± AT Operating Characteristics @ 25 °C Hz 50 Resonant frequency typ. Hz 2800 Operate time max. (incl. bounce) ms 4.5 Release time max. ms 7 Switching frequency max. Approvals 50 - 80 Environmental Characteristics -20 to + 125 Operating temperature °C Vibration (50-2000 Hz) g 15 Shock (1/2 sin 11 ms) g 10 Life Expectancy Ordering Information Resistive load Voltage Current Operations Packing Unit 100 pcs 230 VAC 0.25 A 1 x 10 6 Weight per piece 1.97 g 20 VDC 1A 3 x 10 6 Weight per package 207 g Standard AT ranges © PIC GmbH 50 to 55 AT Dimensions in mm 55 to 60 AT 60 to 65 AT 65 to 70 AT 70 to 75 AT 75 to 80 AT Ordering example CRH-5005055 describes CRH-500 with 50 to 55 AT. Page 1 of 1 Rev.: 2.2 crh500_ds_e_2.2 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com