LED Drivers

A
LED Drivers
CONTENTS
LED Drivers
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
P. A80
Boost Converter LED Drivers・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・P. A80
Buck Converter LED Drivers ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・P. A80
Buck-Boost LED Drivers ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・P. A80
LED Drivers for Lighting ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・P. A81
Inductorless (Charge Pump) LED Drivers ・・・・・・・・・・・・・・・P. A81
Constant Current / Serial-in Parallel-out LED Drivers ・・・・・・・P. A81
LED Driver Support Function ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・P. A81
www.rohm.com
LED Drivers
ICs
ICs
▶ LED Drivers ▶▶Boost Converter LED Drivers
▶▶Buck Converter LED Drivers
▶▶Buck-Boost LED Drivers
LED Drivers
LED Drivers
Boost Converter LED Drivers
White LED Drivers with External FET
Part No.
BD6583MUV-A
2.7 to 22.0
BD9285F
9.0 to 18.0
No. of LEDs
72 Max.
(12 LEDs×6 rows)
Vf restrictions exist
80 Max.
(80 LEDs×1 row)
Output Voltage
(V)
Output Current
(mA)
Switching
Frequency
(MHz)
43.0 Max.
25
(Per row)
1.0
250 Max.
400 Max.
0.05 to 0.8
Control
interface
Primary Brightness Control Method
PWM signal from
the PWMPOW/PWMDRV terminal
Resistance switching at the ISET terminal
PWM signal
Analog signal
Package
(mm)
Pin logic setting
VQFN024V4040
Pin logic setting
SOP18
0.1 to 0.8
PWM signal
Analog signal
Pin logic setting
SSOP-B40
9.0 to 35.0
96 Max.
(12 LEDs×8 rows)
BD9488F
9.0 to 18.0
120 Max.
(120 LEDs×1 row)
400 Max.
400 Max.
0.05 to 0.8
PWM signal
Analog signal
Pin logic setting
SOP18
BD9397EFV
9.0 to 35.0
84 Max.
(14 LEDs×6 rows)
50.0 Max.
400 Max.
0.1 to 1.25
PWM signal
Analog signal
Pin logic setting
HTSSOP-B40
9.0 to 18.0
120 Max.
(120 LEDs×1 row)
400 Max.
0.05 to 0.8
PWM signal
Analog signal
Pin logic setting
SOP16
30
0.6
PWM signal from the PWM terminal
Resistance switching at the ISET terminal
Pin logic setting VSON008X2030
BD9479FV
BD9486F
A
Supply Voltage
(V)
43.0 Max.
500 Max.
400 Max.
White LED Drivers with Integrated FET
LED Drivers
2.7 to 5.5
3 to 10
(10 LEDs×1 row)
2.7 to 5.5
3 to 6
(6 LEDs×1 row)
26.0 Max.
30
0.6
BD65B60GWL
2.7 to 5.5
16 Max.
(8 LEDs×2 rows)
28.5 Max.
25
(Per row)
1.1/0.6
BD6586MUV
2.7 to 5.5
24 Max.
(6 LEDs×4 rows)
24.0 Max.
25
(Per row)
1.0
BD65D00MUV
6.0 to 27.0
40 Max.
(10 LEDs×4 rows)
Internal FET 40.0Max.
External FET 80.0Max.
100
0.6 to 1.5
BD6142AMUV
4.2 to 27.0
80 Max.
(10 LEDs×8 rows)
41.0 Max.
30
(Per row)
0.6 to 1.5
BD60A00NUX
BD60A60NUX
40.0 Max.
PWM signal from the PWM terminal
Resistance switching at the ISET terminal
I2C BUS
PWM signal from the PWM terminal
Resistance switching at the ISET terminal
PWM signal from the PWM terminal
Resistance switching at the ISET terminal
PWM signal from the PWM terminal
Resistance switching at the ISET terminal
Analog voltage control
PWM signal from the PWM terminal
Resistance switching at the ISET terminal
Analog voltage control
Pin logic setting VSON008X2030
I2C BUS
+
PWM
UCSP50L1
(1.4×1.8)H=0.55Max.
Pin logic setting VQFN024V4040
Pin logic setting VQFN028V5050
Pin logic setting VQFN024V4040
Synchronous White LED Drivers with Integrated FET
BD6071HFN
BD6072HFN
BD6079GWL
3.1 to 5.5
2/3
(3 LEDs×1 row)
14.0 Max.
35
(10V output)
1.0
PWM signal from EN terminal
−
HSON8
3.1 to 5.5
3/4
(4 LEDs×1 row)
18.0 Max.
35
(14V output)
1.0
PWM signal from EN terminal
−
HSON8
2.5 to 5.5
10 Max.
(2 LEDs×5 rows)
8.1 Max.
30
2.0
PWM signal from EN terminal
−
UCSP50L1
(1.4×1.8)H=0.55Max.
LED Camera Flash Drivers
Part No.
BD6164GUT
Package
(mm)
Supply Voltage
(V)
Number of LED
Output voltage
(V)
Output current
Switching frequency
Interface
2.7 to 4.5
1
(High power LED)
Max. 4.7
52,72mA(Torch mode)
260,280,300,320mA(Flash mode)
4MHz
I2C BUS
VCSP60N1
2MHz
I2C BUS
UCSP50L2
2MHz
UPIC*
BD7710GWL
2.7 to 5.5
3CH・1 to 2 serial
(large current LED)
Max. 5.5
CH1=0 to 400mA
CH2=0 to 800mA
CH3=0 to 400mA
CH1,2,3 short=0 to 1.6A
BD7757MWX
2.7 to 5.0
1CH・1 to 2 serial
(large current LED)
Max. 5.1
0 to 1.5A
(1.5×1.0)H=0.675Max.
VSON014X3020
LED Camera Flash Drivers : * UPIC:Uni-Port Interface Control
Buck Converter LED Drivers
Buck Converter LED Lighting Driver for DC/DC Converter type
Part No.
BD9207FPS
Supply
Voltage(V)
Maximum output
current(A)
Ron(Ω)
Operating frequency(kHz)
8.0 to 35.0
1.5
1.0(Typ.)
900
Thermal shut down
protection
Over current protection
Package
TO252S-5
Buck Converter LED Lighting Driver for Non Electrolytic Capacitor
Part No.
BD555A1AFV
Supply Voltage(V)
Input AC Voltage(Vac)
Dimming Method
LED Average Current(mA)
Switching Frequency(kHz)
10 to 38
80 to 275
−
100 to 800
20 to 300
Package
SSOP-B14
Buck-Boost LED Drivers
White LED Drivers (For Automotive)
Part No.
Power supply
(V)
Boost FET
Number of
channel(ch)
Output
voltage(V)
Output
current(mA)
Switching
frequency(MHz)
Brightness control
Operating
temperature(°
C)
Package
BD81A04AMUV-M
4.5 to 35.0
Integrated
4
35Max.
120Max./ch
0.2 to 2.2
PWM
−40 to +125
VQFN28SV5050
BD81A34EFV-M
4.5 to 35.0
External
4
35Max.
120Max./ch
0.2 to 2.2
PWM
−40 to +125
HTSSOP-B28
BD81A34MUV-M
4.5 to 35.0
External
4
35Max.
120Max./ch
0.2 to 2.2
PWM
−40 to +125
VQFN28SV5050
Dimmer Mode
DC/DC
Operation
Temperature(°
C)
PWM/DC
Buck-Boost,
Boost, Buck
−40 to +125
White LED Drivers for Head Light (For Automotive)
Part No.
BD8381AEFV-M
A80
Power supply
(V)
5.0 to 30.0
Application
Head Lamp/DRL
Number of Maximum Input
channel(ch)
Voltage(V)
1
50
Drive Current
Depend on
Extra parts
www.rohm.com
Package
HTSSOP-B28
▶ LED Drivers ▶▶LED Drivers for Lighting
▶▶Inductorless (Charge Pump) LED Drivers
▶▶Constant Current / Serial-in Parallel-out LED Drivers
▶▶LED Driver Support Function
ICs
LED Drivers
LED Drivers for Lighting
Buck Converter LED Lighting Driver
Part No.
BD9207FPS
Supply
Voltage(V)
Maximum output
current(A)
Ron(Ω)
Operating frequency(kHz)
8.0 to 35.0
1.5
1.0(Typ.)
900
Thermal shut down
protection
Over current protection
Package
TO252S-5
AC/DC Controller IC for Mains Dimmable LED Lighting
Part No.
Supply Voltage(V)
Input AC Voltage(Vac)
Dimming Method
LED Average Current(mA)
Switching Frequency(kHz)
BD555A1AFV
10 to 38
BD555BKFV
15 to 39
Package
80 to 275
−
100 to 800
20 to 300
SSOP-B14
80 to 275
TRIAC
PWM, LINEAR
100 to 800
40 to 400
SSOP-B14
Inductorless (Charge Pump) LED Drivers
White LED Drivers
Part No.
BD1604MUV
Charge Pump Step-up Circuit
Power Supply
No. of LEDs
Voltage (V)
Output Voltage (V) Output Current (mA) Pump Frequency
2.7 to 5.5
1 to 4
4.5 Max.
Primary Brightness Control Method
1.0MHz
PWM control via EN terminal
Resistance switching at ISET terminal
Built-in 64-step current DAC
(0.5 to 32mA)
SHD control via PWM terminal
BD2606MVV
2.7 to 5.5
1 to 6
4.7 Max.
120
250kHz/
1.0kHz
BU90030G
2.0 to 4.0
1 to 2
(parallel connection)
4.2 Max.
80
1.5MHz
Package
(mm)
Pin logic setting
VQFN016V3030
I C BUS
SQFN016V4040
2
Pin logic setting
SSOP6
Constant Current / Serial-in Parallel-out LED Drivers
Parallel-out LED Drivers
Part No.
BD1754HFN
BD9206EFV
☆BD9271KUT
Constant Current Driver
Power Supply
No. of LEDs
Voltage (V)
Max. Current Setting Method
Max. Current
1 to 4
2.7 to 5.5
(parallel connection)
Resistance change
at ISET terminal
8.0 to 30.0
36 Max.
VSET
Pin voltage setting
32mA
(at VSET=3V)
192 Max.
Resistance change
at S terminal
100mA
(Sx=1.0V)
9.0 to 35.0
Channel-to-Channel Matching
32mA
3% Max.
(at an ISET resistance of 120kΩ) (at 1V LED pin voltage)
Control interface
Brightness Control
Built-in
64-step current DAC
UPIC*
5% Max.
(at 1V LED pin voltage)
ー
Pin logic setting
3% Max.
(at 0.3V S pin voltage)
Built-in
4096-step
3-Wire Serial
Package
HSON8
HTSSOP-B20
TQFP64UM
Parallel-out LED Drivers (For Aoutomotive)
Part No.
BD8378FV-M
Supply Voltage Output Voltage No. of Output
Output Method
(V)
(V)
(ch)
3.0 to 5.5
35
8
Max. LED
Current
Open Drain
Each Output
Format
50mA/ch
ON/OFF
Other
Control Method
Max. Clock
Frequency
−
Shift Resister
Latch
1.25MHz
SSOP-B16
−
Shift Resister
Latch
Package
BD8379FV-M
3.0 to 5.5
35
12
Open Drain
50mA/ch
1.25MHz
SSOP-B20
BD18377EFV-M
3.0 to 5.5
10
12
Constant
Current
50mA/ch
Built-in 64-step PWM control
current DAC for all channel
SPI
1.25MHz
HTSSOP-B20
☆BD2808MUV-M
3.0 to 5.5
20
RGB × 8
(24ch)
Constant
Current
50mA/ch
Built-in 64-step Built-in 256-step PWM
current DAC for RGB control for all channel
2-Wire Serial
1.0MHz
ON/OFF
VQFN48MCV070
Dot Matrix LED Drivers
Part No.
BU26507GUL
BU16501KS2
Supply
Voltage(V)
LED Matrix
Max. LED
Current
2.7 to 5.5
5×6
30dots
42.5mA/Line
2.7 to 5.5
8 × 16
128dots
42.5mA/Line
Built-in pattern Matrix Data
RAM
Scroll Slope
2pages
−
−
1page
Mobile
Light
PWM
Dimming
Current
Setting
Interface
Max. Clock
Frequency
−
64 step
16 step
I2C BUS/SPI
(2 address/ −)
400kHz/13MHz
VCSP50L2
64 step
I2C BUS/SPI
16 step
(2 address/ −)
400kHz/13MHz
SQFP-T52
−
Package
(mm)
(2.5×2.5)H=0.55Max.
LED Source Drivers (For Automotive)
Part No.
BD8372EFJ-M
Power supply
(V)
5.5 to 40.0
Application
DRL/Turn/Rear
Number of
channel(ch)
Dimmer Mode
Accuracy of
Current
Operating
temperature (°
C)
200
High Current/
Low Current
±3% (Ta=25℃ )
−40 to +125
HTSOP-J8
±3% (Ta=25℃ )
−40 to +125
HRP7
Maximum Input Maximum Current
Voltage(V)
(mA)
1
50
Package
BD8372HFP-M
5.5 to 40.0
DRL/Turn/Rear
1
50
200
High Current/
Low Current
BD8374EFJ-M
4.5 to 42.0
DRL/Turn/Rear
1
50
500
PWM
±3% (Ta=25℃ )
−40 to +125
HTSOP-J8
BD8374HFP-M
4.5 to 42.0
DRL/Turn/Rear
1
50
500
PWM
±3% (Ta=25℃ )
−40 to +125
HRP7
Parallel-out LED Drivers : * UPIC:Uni-Port Interface Control
☆:Under development
LED Driver Support Function
PWM Signal Generator with Ambient Light Control for LED Driver IC
Part No.
BD9478F
Supply Voltage(V)
4.5 to 5.5
ALC*
(Sensor)
Other
Control
Interface
−
PWM signal
Synchronous signal output
PWM input
Package
SOP8
* ALC:Auto Luminous Control
www.rohm.com
A81
A
LED Drivers
120
Control Interface
ICs
LED Drivers
MEMO
A
LED Drivers
A82
www.rohm.com