LED Displays CONTENTS ■High Brightness LED Numeric Displays ┈┈┈┈┈P.258 ■LED Numeric Displays ┈┈┈┈┈┈┈┈┈┈P.258 ● Single Digit LED Numeric Displays (Surface Mount Type) ┈ Digit LED Numeric Displays ┈┈┈┈┈ Digit LED Numeric Displays ┈┈┈┈┈┈ ● Three Digit LED Numeric Displays ┈┈┈┈┈┈ P.258 ● Single P.259 ● Two P.259 P.259 ■LED Dot Matrix Units ┈┈┈┈┈┈┈┈┈┈┈P.260 Dots Matrix Units ┈┈┈┈┈┈┈┈┈ ● 16×16 Dots Matrix Units ┈┈┈┈┈┈┈┈┈ ● 24×24 Dots Matrix Units ┈┈┈┈┈┈┈┈┈ ● 24×48 Dots Matrix Units ┈┈┈┈┈┈┈┈┈ ● 16×32 P.260 P.261 P.261 P.261 High Brightness LED Numeric Displays Shape Part No. LAP-301VB/VL LAP-301MB/ML Emitting color High brightness, low power consumption, and high reliability. Absolute maximum ratings(Ta=25℃) Power Forward Peak dissipation current forward current PD IF ∗IFP (mW) (mA) (mA) Reverse voltage VR (V) Electrical and optical characteristics(Ta=25℃) Absolute maximum ratings Operating temperature Topr (℃) Storage temperature Tstg (℃) Forward voltage Reverse current VF IR Typ. Max. IF VR (V) (mA)(mA) (V) Red 650 Green Character Height:8mm LAP-301DB/DL External Dimensions:(7×11) LAP-301YB/YL Orange Yellow LAP-401VD/VN Red LAP-401MD/MN Green Light wavelength Peak Half-wave 448 20 60 5 −25 to +75 −30 to +85 1.9 10 100 3 Brightness / Digit IV lp Dl IF Min. Typ. IF Typ. Typ. (mcd)(mA) (nm)(nm)(mA)(mcd) 572 14 36 36 100 56 250 590 90 450 650 14 36 572 36 100 56 250 450 605 20 10 Character Height:10.16mm LAP-401DD/DN External Dimensions:(9.6×13) LAP-401YD/YN Orange Yellow 590 90 LAP-601VB/VL Red 650 14 36 LAP-601MB/ML Green 572 36 100 56 250 90 450 Character Height:14.6mm LAP-601DB/DL External Dimensions:(12.5×19) LAP-601YB/YL 448 448 Orange 20 20 60 60 5 5 −25 to +75 −30 to +85 1.9 −25 to +75 −30 to +85 1.9 10 10 100 100 3 3 605 605 20 20 10 10 Yellow 590 LBP-602VA2/VK2 Red 650 14 36 LBP-602MA2/MK2 Green 572 36 100 56 250 90 450 896 LBP-602DA2/DK2 Orange 20 60 5 −25 to +75 −30 to +85 1.9 10 100 3 Character Height:14.3mm External Dimensions:(25×19) LBP-602YA2/YK2 Yellow 605 20 10 590 10 10 10 10 Notes:*IFP measured under duty ≦ 1/5, Pulse width ≦ 1ms LED Numeric Displays ■ Single Digit LED Numeric Displays (Surface Mount Type) Shape Character Height:8mm External Dimensions:(6.8×11) Part No. Emitting color ROHM's LED numeric displays are compatible with automatic reflow processes. Absolute maximum ratings (Ta=25℃ ) Forward Peak Power dissipation current forward current PD IF ∗IFP (mW) (mA) (mA) LF-301VA/VK Red 320 15 LF-301MA/MK Green 480 20 60 Reverse voltage VR (V) 5 Absolute maximum ratings Operating temperature Topr (℃ ) −25 to +75 −30 to +85 Electrical and optical characteristics (Ta=25℃ ) Forward voltage Reverse current VF IR Typ. Max. IF VR (V) (mA)(mA) (V) 2.0 www.rohm.com Light wavelength Peak Half-wave Brightness / Digit IV lp Dl IF Min. Typ. IF Typ. Typ. (mcd)(mA) (nm)(nm)(mA)(mcd) 650 10 2.1 Notes:*IFP measured under duty ≦ 1/5, Pulse width ≦ 1 ms 258 Storage temperature Tstg (℃ ) 100 3 40 563 10 3.6 10 10 ■ Single Digit LED Numeric Displays These single digit numeric displays are 8 to 25.4mm in height and available in a range of colors. Part No. LA-301VB/VL Absolute maximum ratings(Ta=25℃) Emitting color Shape Power dissipation PD (mW) Forward current IF (mA) Red 320 15 LA-301MB/ML Green 480 20 LA-301BB/BL Blue 336 10 LA-301AB/AL Character Height:8mm LA-301EB/EL External Dimensions: (7×11) LA-301XB/XL High Brightness Red High Brightness Orange High Brightness Yellow 520 25 LA-401VD/VN Red 320 15 LA-401MD/MN Green 480 20 LA-401BD/BN Blue 336 10 LA-401AD/AN Character Height:10.16mm LA-401ED/EN External Dimensions: (9.6×13) LA-401XD/XN High Brightness Red High Brightness Orange High Brightness Yellow 520 Character Height:13mm LA-501VD/VN Red External Dimensions:(12.5×17.5) LA-501MD/MN Green LA-601VB/VL 480 Red 25 20 Peak forward current ∗IFP (mA) Reverse voltage VR (V) Operating temperature Topr (℃) Storage temperature Tstg (℃) 336 10 High Brightness Red High Brightness Orange High Brightness Yellow 520 25 Character Height:25.4mm LA-101VA/VK Red External Dimensions:(24×34) LA-101MA/MK Green 640 LA-601AB/AL Character Height:14.6mm External LA-601EB/EL Dimensions: (12.5×19) LA-601XB/XL 15 20 Forward voltage Reverse current VF IR Typ. Max. IF VR (V) (mA)(mA) (V) 2.0 60 2.1 50 2.05 20 2.1 50 5 −25 to +75 −30 to +85 60 2.05 18 610 17 589 15 20 100 3 470 26 18 610 17 589 15 650 563 10 40 626 2.1 650 40 2.1 563 3.6 470 26 626 18 2.05 4.0 60 26 2.0 2.0 50 470 563 3.6 40 626 650 10 4.2 20 610 17 589 15 650 10 Brightness / Digit IV lp Dl IF Min. Typ. IF Typ. Typ. (mcd)(mA) (nm)(nm)(mA)(mcd) 563 2.0 60 Light wavelength Peak Half-wave 650 10 3.6 LA-601MB/ML Green LA-601BB/BL Blue Electrical and optical characteristics(Ta=25℃) Absolute maximum ratings 563 40 10 20 10 20 3.6 10 14 56 36 90 5.6 16 14 56 36 90 5.6 10 20 10 10 16 14 9.0 22 14 56 36 90 3.6 10 5.6 16 Notes:*IFP measured under duty ≦ 1/5, Pulse width ≦ 1 ms, High Brightness and Blue IFP measured under duty ≦ 1/10, Pulse width ≦ 0.1 ms 2) LA-101 series : order-based production ■ Two Digit LED Numeric Displays These two digit numeric displays are 7.62 to 14.3mm in height and available in a range of colors. Part No. Character LB-302VF/VP Height:7.62mm External Dimensions:(15.5×15) LB-302MF/MP Character LB-502VD/VN Height:13mm External Dimensions:(25×17.5) LB-502MD/MN Power dissipation PD (mW) Forward current IF (mA) Red 800 15 Green 960 20 Red 640 15 Reverse voltage VR (V) Operating temperature Topr (℃) Storage temperature Tstg (℃) 5 −25 to +75 −30 to +85 Green Red 960 20 Green LB-602MA2/MK2 Green LB-602BA2/BK2 Blue LB-602AA2/AK2 High Brightness Red LB-602EA2/EK2 High Brightness Orange Electrical and optical characteristics(Ta=25℃) Absolute maximum ratings Forward voltage Reverse current VF IR Typ. Max. IF VR (V) (mA)(mA) (V) 2.0 60 LB-602VA2/VK2 Red Character Height:14.3mm External Dimensions:(25×19) LB-602XA2/XK2 Peak forward current ∗IFP (mA) 20 2.2 6.3 2.1 563 3.6 9.0 2.0 650 5.6 16 25 10 40 10 2.1 563 9.0 2.0 650 5.6 16 2.1 563 9.0 25 5.6 16 9.0 25 14 56 36 90 100 3 650 60 10 40 2.1 672 Brightness / Digit IV 650 2.0 960 Light wavelength Peak Half-wave lp Dl IF Min. Typ. IF Typ. Typ. (mcd)(mA) (nm)(nm)(mA)(mcd) 10 5 −25 to +75 −30 to +85 10 10 563 3.6 470 26 626 18 50 1040 25 2.05 20 High Brightness Yellow 610 17 589 15 20 Notes:*IFP measured under duty ≦ 1/5, Pulse width ≦ 1 ms, High Brightness and Blue IFP measured under duty ≦ 1/10, Pulse width ≦ 0.1 ms ■ Three Digit LED Numeric Displays This lineup of three digit numeric displays ranges in height from 8 to 14.3mm and are available in either red or green. Part No. Character LB-303VA/VK Height:8mm External Dimensions:(22×13) LB-303MA/MK Character LB-603VF/VP Height:14.3mm External Dimensions: LB-603MF/MP (37.5×18) Absolute maximum ratings(Ta=25℃ ) Emitting color Shape Power dissipation PD (mW) Red 960 15 Forward Peak Reverse current forward current voltage IF ∗IFP VR (mA) (mA) (V) Electrical and optical characteristics(Ta=25℃) Absolute maximum ratings Operating temperature Topr (℃) Storage temperature Tstg (℃) Forward voltage Reverse current VF IR Typ. Max. IF VR (V) (mA)(mA) (V) 2.0 Brightness / Digit IV 650 4.0 Green 1440 20 2.2 6.3 960 15 2.0 650 5.6 16 Green 1440 20 2.1 563 9.0 25 5 −25 to +75 −30 to +85 10 100 3 563 1.4 Red 60 2.1 Light wavelength Peak Half-wave lp Dl IF Min. Typ. IF Typ. Typ. (mcd)(mA) (nm)(nm)(mA)(mcd) 40 10 10 Notes:*IFP measured under duty ≦ 1/5, Pulse width ≦ 1 ms www.rohm.com 259 LED Displays Character LB-402VD/VN Height:10.16mm External Dimensions:(24×18) LB-402MD/MN Absolute maximum ratings(Ta=25℃) Emitting color Shape LED Dot Matrix Units ■16×32 Dots Matrix Units The 16×32 dot matrix LED modules combine the LED matrix and IC drivers. Character strings can be displayed via cascade connection. The IC drivers have enough RAM to allow programming of one screen of information while another screen is being displayed. Both graphics and characters can be displayed. Emitting surface size (mm) Shape 40 × 80 Part No. Display Emitting Wavelength color (nm) LUM-512CMU300 Milky white Chip LEDs Red 630 Green 570 LUM-512CMU301 Milky white Chip LEDs with Louver Red 630 Green 570 ☆LUM-512CMU302 Milky white Chip LEDs with Louver Red 630 Green 570 LUM-512CMU320 Milky white Chip LEDs Red 630 Green 570 LUM-512CY300 Milky white Chip LEDs Yellow LUM-512CD300 Milky white Chip LEDs LUM-512CU300 Milky white Chip LEDs LPM-5123BMU813 Potting lens Control LED Dot Dot Number Operating l CC1 VLED l CC2 Brightness freq. size pitch of dots VDD Drive type Max. Max. (cd/m2) (mm) (mm) (dot) (V) (mA) (V) (A) (MHz) 16×32 5 80 4.5 2.0 1.1×1.3 2.5 16×32 5 80 4.5 2.0 1.1×1.3 2.5 16×32 5 100 4.5 3.0 1.1×1.3 2.5 16×32 5 30 5 2.0 590 1.2×0.8 2.5 16×32 5 80 5 1.7 1000 10 1/16 duty (Max.)(Shift register type) Orange 611 1.2×0.8 2.5 16×32 5 80 5 1.7 1000 10 1/16 duty (Max.)(Shift register type) Red 630 1.2×0.8 2.5 16×32 5 80 5 1.7 800 10 1/16 duty (Max.)(Shift register type) φ2.8 4 16×32 5 500 5 3.0 890 Green(525) 600 13 1/16 duty 400 (Max.)(Shift register type) 100 20 1/16 duty 120 (Max.)(Memory type) 1/16 duty 10 (shift register type) (Max.) External gray levels clock 1024 gray levels 180 Chip LEDs with Louver Yellow 590 1.6×2.3 4 16×32 5 30 5 2.0 2400 20 1/16 duty (Max.)(Memory type) ☆LUM-512CY371 Chip LEDs Yellow 590 1.2×0.8 4 16×32 5 100 5 2.0 600 10 1/16 duty (Max.)(Shift register type) LPM-5123Y320 Potting lens Yellow 590 φ2.8 4 16×32 5 100 5 1.6 500 10 1/16 duty (Max.)(Shift register type) LPM-5123D320 Potting lens Orange 605 φ2.8 4 16×32 5 100 5 1.6 700 10 1/16 duty (Max.)(Shift register type) LPM-5123U320 Potting lens Red 624 φ2.8 4 16×32 5 100 5 1.6 500 10 1/16 duty (Max.)(Shift register type) Red 624 LPM-5123MU300 Potting lens φ2.8 4 16×32 5 30 5 3.0 LUM-512HML350 Green 571 Red 624 Potting lens 300 300 250 6 φ2.8 Green 571 Red 660 Chip LEDs 16×32 5 20 5 5.2 200 100 2.1×2.3 6 16×32 5 20 5 4.3 Green 563 100 20 1/16 duty (Max.)(Memory type) 20 1/16 duty (Max.)(Memory type) 20 1/16 duty (Max.)(Memory type) LUM-512HY354 Chip LEDs with Louver Yellow 590 1.6×2.3 6 16×32 5 60 5 4.0 2000 20 1/8 duty (Max.)( Memory type) LUM-512HY3A0 Chip LEDs with Louver Yellow 590 1.6×2.3 7.62 16×32 5 2000 5 6.0 2000 8 (Max.) ☆:Under development 260 13 1/16 duty 120 (Max.)(Shift register type) LUM-512HY304 LPM-5123MU350 122×244 100 330 Blue (471) 96×192 13 1/16 duty 120 (Max.)(Shift register type) 2.5 Red (624) 64×128 100 1.1×1.3 www.rohm.com Static ■ 16×16 Dots Matrix Units The 16×16 dot matrix LED modules combine the LED matrix and IC drivers. Multiple letters can be displayed by cascade connection. The IC drivers have enough RAM to allow programming of one screen of information while another screen is being displayed. Both graphics and characters can be displayed. Emitting surface size (mm) Shape 64×64 Part No. Display LPM-2563MU300 Potting lens Emitting Wavelength color (nm) Red Green 624 Control LED Dot Dot Number Operating l CC1 VLED l CC2 Brightness freq. size pitch of dots VDD Drive type Max. Max. (cd/m2) (mm) (mm) (dot) (V) (mA) (V) (A) (MHz) φ2.8 300 4 16×16 5 20 5 1.6 571 300 20 1/16 duty (Max.)(Memory type) ■ 24×24 Dots Matrix Units The 24×24 dot matrix LED modules combine the LED matrix and IC drivers. Multiple letters can be displayed by cascade connection. The IC drivers have enough RAM to allow programming of one screen of information while another screen is being displayed. Both graphics and characters can be displayed. Emitting surface size (mm) Shape Part No. Display LPM-5763BMU813 Potting lens Emitting Wavelength color (nm) Control LED Dot Dot Number Operating l CC1 VLED l CC2 Brightness freq. size pitch of dots VDD Drive type Max. Max. (cd/m2) (mm) (mm) (dot) (V) (mA) (V) (A) (MHz) Red (624) 330 Green(525) φ2.8 4 24×24 5 400 5 3.0 4 24×24 5 20 5 2.6 Blue (471) 96×96 LPM-5763MU301 Red 624 Potting lens Green φ2.8 1/24 duty 10 (shift register type) (Max.) External gray levels clock 1024 gray levels 180 890 300 571 300 20 1/24 duty (Max.)(Memory type) ※LPM-5763BMU813 was designed to be used with the LPM-1153BMU813 and therefore does not have a signal output pin. ■ 24×48 Dots Matrix Units The 24×48 dot matrix LED modules combine the LED matrix and IC drivers. Multiple letters can be displayed by cascade connection. The IC drivers have enough RAM to allow programming of one screen of information while another screen is being displayed. Both graphics and characters can be displayed. Emitting surface size (mm) 64×128 Shape Part No. Display Emitting Wavelength color (nm) Red LUM-115BMU300 Control LED Dot Dot Number Operating l CC1 VLED l CC2 Brightness freq. size pitch of dots VDD Drive type Max. Max. (cd/m2) (mm) (mm) (dot) (V) (mA) (V) (A) (MHz) 624 Chip LEDs 300 1.0×0.6 Green 2.67 24×48 5 40 5 2.0 572 300 Red (624) LPM-1153BMU813 Potting lens 96×192 LPM-1153MU300 330 Green(525) φ2.8 4 24×48 5 600 5 6.0 890 Blue (471) 180 Red 624 300 Green 571 Potting lens φ2.8 4 24×48 5 40 5 5.2 300 1/24 duty 10 (shift register type) (Max.) External gray levels clock 1024 gray levels 20 1/24 duty (Max.)(Memory type) Potting Lens LED Type Chip LED Type LED Displays Chip LED Type 20 1/24 duty (Memory type) (Max.) Potting Lens LED Type ● ●Both side mounting achieves the thickness reduction. Potting Lens LED Type ● High Contrast (Reflection 50% Down) 14mm 〈Image of outside〉 〈Image of display〉 Chip LED Type 8.2 to 9.1mm Conventional Product www.rohm.com Potting Lens LED Type 261 MEMO 262 www.rohm.com Notes 1) The information contained in this document is provided as of 1st. October, 2013. 2) The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative (as listed below) and verify the latest specifications. 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Products beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products.The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative: transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensure the accuracy of the information contained in this document. However, ROHM does not warrant that such information is error-free and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office as listed below. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM.