Part Number: XZFCWD14A SURFACE MOUNT DISPLAY Features Package Schematics ● 0.56 inch digit height ● Robust package ● Low power consumption ● Standard configuration: Gray face w/ white segments ● Standard Package: 400pcs/ Reel ● MSL (Moisture Sensitivity Level): 2a ● RoHS compliant CWD ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Absolute Maximum Ratings (TA=25°C) Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. CWD (InGaN) Unit Operating Characteristics (TA=25°C) CWD (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Voltage (Typ.) (IF=10mA) VF 3.0 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Forward Voltage (Max.) (IF=10mA) VF 4.0 V Power Dissipation PD 120 mW Reverse Current (Max.) (VR=5V) IR 50 uA Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 X 0.31 Y 0.31 C 100 Storage Temperature Electrostatic Discharge Threshold (HBM) 250 °C Chromaticity Coordinates (Typ.) V Capacitance (Typ.) (VF=0V, f=1MHz) Part Number XZFCWD14A Emitting Color White Emitting Material InGaN Luminous Intensity CIE127-2007* (IF=10mA) ucd min. typ. 21000* 37990* pF Description Common Anode, Rt. Hand Decimal. *Luminous intensity value is in accordance with CIE127-2007 standards. Jan 13,2014 XDSB5525 V3-Z Layout: Maggie L. P. 1/5 Part Number: XZFCWD14A SURFACE MOUNT DISPLAY CWD LED is recommended for reflow soldering and soldering profile is shown below. Jan 13,2014 XDSB5525 V3-Z Layout: Maggie L. P. 2/5 Part Number: XZFCWD14A SURFACE MOUNT DISPLAY XZFCWD14A White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. Jan 13,2014 XDSB5525 V3-Z Layout: Maggie L. P. 3/5 Part Number: XZFCWD14A SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Tape Specification (Units : mm) Reel Dimension Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or chromaticity), the typical accuracy of the sorting process is as follows: 1. Measurement tolerance of the chromaticity coordinates is ±0.01. 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Jan 13,2014 XDSB5525 V3-Z Layout: Maggie L. P. 4/5 Part Number: XZFCWD14A SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Jan 13,2014 XDSB5525 V3-Z Layout: Maggie L. P. 5/5