Part Number: XZCWDF151F5MAV 1.6x0.2mm RIGHT ANGLE SMD CHIP LED LAMP Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 z Low current IF=5mA operating. ● RoHS compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) CWDF (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 20 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 70 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +100 Storage Temperature Part Number XZCWDF151F5MAV 100 Emitting Color White mA mW °C Operating Characteristics (TA=25°C) InGaN Unit Forward Voltage (Typ.) (IF=5mA) VF 2.8 V Forward Voltage (Max.) (IF=5mA) VF 3.2 V Reverse Current (Max.) (VR=5V) IR 50 uA x 0.31 y 0.31 Chromaticity Coordinates (Typ.) Emitting Material CWDF (InGaN) Lens-color Yellow Fluorescent Luminous Intensity CIE127-2007* (IF=5mA) mcd min. typ. 20* 59* Viewing Angle 2θ 1/2 135°(H) 180°(V) *Luminous intensity value is in accordance with CIE127-2007 standards. May 29,2014 XDSB7912 V1-Z Layout: Maggie L. P. 1/5 Part Number: XZCWDF151F5MAV 1.6x0.2mm RIGHT ANGLE SMD CHIP LED LAMP CWDF LED is recommended for reflow soldering and soldering profile is shown below. May 29,2014 XDSB7912 V1-Z Layout: Maggie L. P. 2/5 Part Number: XZCWDF151F5MAV 1.6x0.2mm RIGHT ANGLE SMD CHIP LED LAMP XZCWDF151F5MAV White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. May 29,2014 XDSB7912 V1-Z Layout: Maggie L. P. 3/5 Part Number: XZCWDF151F5MAV 1.6x0.2mm RIGHT ANGLE SMD CHIP LED LAMP The device has a single mounting surface. The device must be mounted according to the specifications. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or chromaticity), the typical accuracy of the sorting process is as follows: 1. Measurement tolerance of the chromaticity coordinates is ±0.01. 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. May 29,2014 XDSB7912 V1-Z Layout: Maggie L. P. 4/5 Part Number: XZCWDF151F5MAV 1.6x0.2mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS XZxxx151x TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp May 29,2014 XDSB7912 V1-Z Layout: Maggie L. P. 5/5